Changes between Version 2 and Version 3 of GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_data


Ignore:
Timestamp:
06/18/14 16:43:42 (10 years ago)
Author:
mkeele@indiana.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_data

    v2 v3  
    22
    33[[PageOutline]]
    4 = Exercise: retrieve experiment data from measurement backend =
     4= Exercise: Retrieve Experiment Data from Measurement Backend =
    55
    66
     
    88== Exercise Description ==
    99
    10 In this exercise you will use the active measurement features of the GEMINI system.  In particular, you will be introduced to ...
     10In this exercise you will continue the previous exercise. After your experimental data is collect and displayed through GENI Desktop, you can access the raw data and edit and display it however you want. You will also get familiar with the whole GEMINI architecture by understand how the measurements are executed and how the data are stored.
    1111
    1212== Prerequisites ==
    1313This exercise assumes that you have already
    14  * created a slice with slivers as shown in this [wiki:GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology example topology].
    15  * logged into the GENI Desktop and instrumentized the slice
     14 * successfully run a BLiPP measurement from previous exercise and see the data generated from GENI Desktop interface.
    1615
    1716== Tutorial Instructions ==
     
    3938<li>Part II: Execute</li>
    4039             <ul>
    41                  <li><a href="http://groups.geni.net/geni/wiki/GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_data/RetrieveData">Execute Experiment: Use NetLogger and Blipp access detailed measurement data</a> </li>
     40                 <li><a href="http://groups.geni.net/geni/wiki/GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_data/RetrieveData">Execute Experiment: Retrieve data and display it</a> </li>
    4241             </ul></ul>
    4342                </td>