wiki:GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology_g

Version 6 (modified by Hussamuddin Nasir, 5 years ago) (diff)

--

Back to GEMINI Tutorial at GEC20

Creating a GEMINI Slice and Slivers via GeniDesktop

Creating a Slice


As shown in picture above

  1. Type in a unique and valid Geni slicename.
  1. Select the project name if you are part of multiple projects.
  1. Click on "Create Slice". You should see your slice show up in the list above.




Creating a Slivers for GEMINI GEC20 Tutorial

We have provided a pre-made rspec for the Instageni Control Framework that you can download from here (Rspec for GEC20 Geni Desktop Tutorial).
If you have not been assigned a rack by anyone , please ask one of the presenters to assign you an InstaGENI rack. To get started


Find the slice from the list of slices you want your slivers created on. For that slice row click in the area under column called "RSPEC". This should have been filled with the word "NONE" or "Cleared". (see figure above)



  1. In the rspec box above, Click on the upload Rspec
  2. In the pop up box click on choose File and point it to the rspec file you had downloaded earlier. Fill in the other details as shown by arrows (3) and (4)
  3. Click on Upload Rspec.
  4. Select the just uploaded rspec for the GEC20 GEMINI Tutorial. Once selected you should see it listed in the rspec column for your slice.


  1. Click in the column called "AM" for the slice record that you are working on. You should see a dialog like shown below.

7a,7b . Select the appropriate AM/Instageni Rack that has been assigned to you and click on the "Set AM For" button on the top to confirm your selection.

  1. Finally click on the "Create Sliver" button and wait for it to come back with a status update.