Changes between Version 2 and Version 3 of GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology_g

Timestamp:

06/13/14 14:40:21 (10 years ago)

Author:

Hussamuddin Nasir

Comment:

--

GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology_g

@@ -9 +9 @@
 == Creating a Slice == 
 
-[[Image(wiki:GEMINI/Tutorial/Images:create_slice_gd.png)]]
+[[Image(wiki:GEMINI/Tutorial/Images:create_slice_gd_gec20.png)]]
 [[BR]]
 As shown in picture above
@@ -25 +25 @@
 == Creating a Slivers for GEMINI GEC20 Tutorial == 
 
-We have provided some pre-made rspecs for each Instageni Rack advertised at the Geni Portal. If you have not been assigned a rack by anyone , please ask one of the presenters to assign you an InstaGENI rack. To get started
+We have provided a pre-made rspec for the Instageni Control Framework that you can download from [http://groups.geni.net/geni/wiki/GEMINI/Tutorial/Images/gec-gd.rspec here (Rspec for GEC20 Geni Desktop Tutorial)]. If you have not been assigned a rack by anyone , please ask one of the presenters to assign you an InstaGENI rack. To get started
 [[BR]]
-[[Image(wiki:GEMINI/Tutorial/Images:create_sliver1_gd.png)]]
+[[Image(wiki:GEMINI/Tutorial/Images:create_sliver_gd1_gec20.png)]]
 [[BR]]
 
@@ -36 +36 @@
  3. Click in the column called "AM"  for the slice record that you are working on. You should see a dialog like shown below. 
 [[BR]]
- [[Image(wiki:GEMINI/Tutorial/Images:create_sliver2_gd.png)]] 
+ [[Image(wiki:GEMINI/Tutorial/Images:create_sliver_gd2_gec20.png)]] 
 [[BR]]
 
@@ -44 +44 @@
  5. Finally click on the "Create Sliver" button and wait for it to come back with a status update.
 
- [[Image(wiki:GEMINI/Tutorial/Images:create_sliver3_gd.png)]]
+ [[Image(wiki:GEMINI/Tutorial/Images:create_sliver_gd3_gec20.png)]]
+ [[Image(wiki:GEMINI/Tutorial/Images:create_sliver_gd4_gec20.png)]]