Changes between Version 1 and Version 2 of GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology_g


Ignore:
Timestamp:
06/04/14 12:05:51 (10 years ago)
Author:
Jeanne Ohren
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GEMINI/Tutorial/GEC20/GENI_Desktop_and_GEMINI_Example_Topology_g

    v1 v2  
    44[[Image(wiki:GEMINI/Tutorial/Images:genidesktop.png)]][[Image(wiki:GEMINI/Tutorial/Images:gemini_logo.png)]]
    55
    6 [http://groups.geni.net/geni/wiki/GEMINI/Tutorial/GEC19 Back to GEMINI Tutorial at GEC19][[BR]][[BR]]
     6[http://groups.geni.net/geni/wiki/GEMINI/Tutorial/GEC20 Back to GEMINI Tutorial at GEC20][[BR]][[BR]]
    77= Creating a GEMINI Slice and Slivers via !GeniDesktop =
    88
    … …  
    2323
    2424[[BR]]
    25 == Creating a Slivers for GEMINI GEC19 Tutorial ==
     25== Creating a Slivers for GEMINI GEC20 Tutorial ==
    2626
    2727We have provided some pre-made rspecs for each Instageni Rack advertised at the Geni Portal. If you have not been assigned a rack by anyone , please ask one of the presenters to assign you an InstaGENI rack. To get started
    … …  
    3232 1. Find the slice from the list of slices you want your slivers created on. For that slice row click in the area under column  called "RSPEC". This should have been filled with the word "NONE" or "Cleared". (see figure above)
    3333
    34  2. In the rspec box below, select the rspec for the GEC19 GEMINI Tutorial. You should select "GEC19 GEMINI for Instageni". Once selected you should see it listed in place where the arrow 1 points.
     34 2. In the rspec box below, select the rspec for the GEC20 GEMINI Tutorial. You should select "GEC20 GEMINI for Instageni". Once selected you should see it listed in place where the arrow 1 points.
    3535
    3636 3. Click in the column called "AM"  for the slice record that you are working on. You should see a dialog like shown below.