Changes between Version 19 and Version 20 of GEC21Agenda/iMinds


Ignore:
Timestamp:
10/17/14 10:43:45 (5 years ago)
Author:
pieter.becue@intec.ugent.be
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC21Agenda/iMinds

    v19 v20  
    8888Modify the end hour to 12:30 and click on 'Get Free Nodes'. Every group should reserve 3 wireless nodes for this tutorial. See the table below to see which nodes are available for your group number (ask the tutor if you have not received a number yet).
    8989
    90 ||Group||Channel||Mode||AP||Communicator||Robot2
     90||Group||Channel||Mode||AP||Communicator||Robot
    9191||1||1||g||zotacB1||zotacB3||mobile1
    9292||2||6||g||zotacB2||zotacB4||mobile2
     
    103103||13||1||g||zotacI1||zotacI3||mobile13
    104104||14||6||g||zotacI2||zotacJ1||mobile14
    105 || || || ||(i not L)|| || ||
    106105
    107106 === Activate your nodes using jFed ===
    108107
    109 All of the w-iLab.t nodes have been previously reserved for the "GEC21" project. You should join this project prior to running the tutorial.
    110 
    111 Every group has 3 wireless nodes (2 fixed and 1 mobile) which you have to activate using jFed. You should choose specific nodes in jFed by right clicking the node.
    112 Name them: ap, client and backup. See the table on the group sheets to see which nodes you can use.
     108Follow these steps to activate your nodes using jFed:
     109 * Fire up jFed by browsing to the [http://jfed.iminds.be jFed home page] and click on 'Quickstart jFed experimenter tool'. If all goes well, you should be prompted to provide your User certificate and Password. Browse to the location where you stored the .pem-file (see previous steps), provide your password and click 'Login'.
     110 * Click on ''New''
     111 * Drag in 3 wireless nodes
     112 * Right click, ''Configure Node'' to change the properties (name/testbed/disk image/specific node)
     113 * Name your nodes as shown in the table above, or chose your own names (you will need the names later on for the Labwiki tutorial)
     114 * By default, the ''iMinds WiLab 2'' testbed should be selected (because we picked wireless nodes)
     115 * For every node, select a specific node from the list (see table above)
    113116
    114117 === Configure the access point (on the mobile node) ===