Changes between Version 17 and Version 18 of GEC21Agenda/iMinds


Ignore:
Timestamp:
10/17/14 10:23:16 (9 years ago)
Author:
pieter.becue@intec.ugent.be
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC21Agenda/iMinds

    v17 v18  
    5454
    5555== Tutorial materials ==
    56 Instructions:
     56
     57If you have not attended the session, please read the general introduction to the [http://doc.ilabt.iminds.be/ilabt-documentation/wilabfacility.html iMinds w-iLab.t testbed] before starting this tutorial.
     58
     59Tutorial outline:
    5760
    5861In this tutorial, we will show you how to set up one wireless access point and connect with 1 client. The access point will start an iPerf server instance, after which we will run an iPerf client instance on the second node. By using the correct IP addresses, we make sure that the iPerf traffic stream is routed over the wireless interfaces.
    59 In this tutorial, we will use a mobile node for setting up the access point. The client will be configured on a fixed wireless node.
    60 
    61 In a second part of the tutorial, we will demonstrate how to use OMF/OML & Labwiki to run wireless experiment on the w-iLab.t testbed, including mobile nodes. Using the graph plotting capabilities of Labwiki, you will be able to see the throughput impact of moving the mobile node around the testbed.
    62 
    63  Instructions below are not final yet...
     62In this tutorial, we will use a fixed wireless node for setting up the access point. The client will be running on a mobile node.
     63After successfully setting up the iPerf stream, we will demonstrate how the mobile nodes can be configured to drive a pre-determined path.
     64
     65In a second part of the tutorial, we will demonstrate how to use OMF/OML & Labwiki to run wireless experiment on the w-iLab.t testbed, including mobile nodes. Using the graph plotting capabilities of Labwiki, you will be able to visualise the iPerf throughput.
    6466
    6567== Part 1: Wireless & mobile experimentation at w-iLab.t ==
     
    8082Linux/MAC OSX users: Import your .p12 file in the certificate store of your browser.
    8183
    82  === Reserve 3 wireless nodes using jFed ===
     84 === Reserve some nodes at w-iLab.t ===
     85
     86Browse to the [https://www.wilab2.ilabt.iminds.be:12369/reservation/sfareservation.php3 w-iLab.t reservation page]. If the previous step was successful, you should now be prompted to select your certificate. Once the page has loaded, please verify that the last part of the User URN matches your own user name.
     87
     88Modify the end hour to 12:30 and click on 'Get Free Nodes'. Every group should reserve 3 wireless nodes for this tutorial. See the table below to see which nodes are available for your group number (ask the tutor if you have not received a number yet).
     89
     90
     91
     92 === Activate your nodes using jFed ===
    8393
    8494All of the w-iLab.t nodes have been previously reserved for the "GEC21" project. You should join this project prior to running the tutorial.