Changes between Version 15 and Version 16 of GEC20Agenda/LabWiki/ModuleE/Execute

Timestamp:

08/04/14 11:27:51 (10 years ago)

Author:

dbhat@bbn.com

Comment:

--

GEC20Agenda/LabWiki/ModuleE/Execute

@@ -17 +17 @@
 ==== 3.1.2a. Start Trema controllers on the two switch nodes in the topology shown in [http://groups.geni.net/geni/wiki/GEC20Agenda/LabWiki/ModuleC/DesignSetup ModuleC] ====
 
-Show in [http://groups.geni.net/geni/wiki/GEC20Agenda/LabWiki/ModuleC/DesignSetup ModuleC]
+Shown in [http://groups.geni.net/geni/wiki/GEC20Agenda/LabWiki/ModuleC/DesignSetup ModuleC]. If you have run Module C before this, your controllers are already running and there is no need to do this step.
 
 ==== 3.1.2b. Start an Iperf server on nodef ====
 
 {{{
+#!ruby
 defApplication('iperfserv') do |app|
   app.description = "manually run Iperf server"
@@ -37 +38 @@
 
 {{{
+#!ruby
 defApplication('iperfclient') do |app|
   app.description = "manually run Iperf client"
@@ -53 +55 @@
 OEDL script
 {{{
-
+#!ruby
 defProperty('source1', "switch1-egtest7", "ID of a resource")
 defProperty('theSender1', "nodeb-egtest7", "ID of a resource")
@@ -168 +170 @@
 That will automatically fill out the experiment relevant information in this window and allow you to start the actual experiment by clicking on the "Start Experiment" button.
 
-[[Image(LW_wiki_flowstats1.png, 90%)]]
+[[Image(LW_wiki_flowstats1.png, 60%)]]
 
 Explanation of the fields in the Execute window:
@@ -185 +187 @@
 The figure below gives an example for the Execute window during experiment execution.
 
-[[Image(LW_wiki_flowstats2.png, 90%)]]
+[[Image(LW_wiki_flowstats2.png, 60%)]]
 
 Now the window lists experiment properties, one or several live graphs (if they have been specified in the OEDL script), and logging information. The latter would be a good starting point for trouble shooting, should your experiment not run as expected.