Changes between Version 7 and Version 8 of GEC19Agenda/IntroToOFOpenDaylight


Ignore:
Timestamp:
03/12/14 13:46:16 (10 years ago)
Author:
Anirudh Ramachandran
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC19Agenda/IntroToOFOpenDaylight

    v7 v8  
    1313== Agenda / Details ==
    1414
    15 This tutorial will start with a brief introduction to OpenFlow/SDN, and then describe the !OpenDaylight SDN controller platform and its various components. We will then dive into a hands-on tutorial on !OpenDaylight where we will set up the controller platform, walk through an Openflow-based learning switch application, and test the application using virtual Openflow switches. The tutorial will use content from http://sdnhub.org/tutorials/opendaylight
     15This tutorial will start with a very brief introduction to OpenFlow/SDN, and then describe the !OpenDaylight SDN controller platform and its various components. We will then dive into a hands-on tutorial on !OpenDaylight where we will set up the controller platform, walk through an Openflow-based learning switch application, and test the application using virtual Openflow switches. If time permits, we will also visit a stateless loadbalancer application. The tutorial will use content from http://sdnhub.org/tutorials/opendaylight
    1616
    1717== Pre-Requisites ==
     
    2828== Tutorial materials ==
    2929Instructions:
     30{{{
     31#!html
     32
     33
     34<table id="Table_01" height="409" border="0" cellpadding="0" cellspacing="0">
     35        <tr>
     36                <td>
     37                        <a href="http://groups.geni.net/geni/wiki/GEC19Agenda/IntroToOFOpenDaylight/DesignSetup"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/design.png?format=raw" width="152" height="152" alt="Design/Setup"></a>
     38               </td>
     39               <td>
     40<ul>
     41             <li><a href="http://groups.geni.net/geni/wiki/GEC19Agenda/IntroToOFOpenDaylight/DesignSetup">Part I: Design/Setup</a></li>
     42             <ul>
     43                 <li>Step 1:  Obtain Resources</li>
     44             </ul></ul>
     45               </td>
     46        </tr>
     47        <tr>
     48                <td>
     49                        <a href="http://groups.geni.net/geni/wiki/GEC19Agenda/IntroToOFOpenDaylight/Execute"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/execute.png?format=raw" width="152" height="143" alt="Execute"></a>
     50                </td>
     51                <td>
     52             <ul>
     53<li><a href="http://groups.geni.net/geni/wiki/GENIExperimenter/Tutorials/OpenFlowOVS/Execute">Part II: Execute</a></li>
     54             <ul>
     55                 <li>Step 2:  Configure and Initialize Services </li>
     56                 <li>Step 3:  Execute Experiment </li>
     57             </ul></ul>
     58                </td>
     59        </tr>
     60        <tr>
     61                <td>
     62                        <a href="http://groups.geni.net/geni/wiki/GEC19Agenda/IntroToOFOpenDaylight/Finish"><img src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/finish.png?format=raw" width="152" height="114" alt="Finish"></a>
     63                </td>
     64
     65                <td>
     66             <ul>
     67             <li><a href="http://groups.geni.net/geni/wiki/GEC19Agenda/IntroToOFOpenDaylight/Finish">Part III: Finish</a></li>
     68             <ul>
     69                 <li>Step 4:  Teardown Experiment</li>
     70             </ul></ul>
     71                </td>
     72
     73        </tr>
     74</table>
    3075
    3176Slides: