Changes between Version 29 and Version 30 of GEC18Agenda/LabWikiAndOEDL/Experiment1


Ignore:
Timestamp:
10/24/13 17:54:09 (10 years ago)
Author:
Jeanne Ohren
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC18Agenda/LabWikiAndOEDL/Experiment1

    v29 v30  
    121121 1. After saving the above OEDL experiment description, drag-and-drop it from the "Prepare" column to the "Execute" column, as [http://groups.geni.net/geni/wiki/GEC18Agenda/LabWikiAndOEDL/Introduction#Execute previously described].
    122122
    123   [[Image(labwiki_exp1_1.png, 100%)]]
     123  [[Image(labwiki_exp1_1.png, 110%)]]
    124124
    125125  2. Set the values of the properties 'resource1' and 'resource2' according to the following:
     
    130130  (You can optionally decide to give a name to your experiment, if not !LabWiki will assign a default unique name to it. The slice name is also optional for this tutorial)
    131131
    132   [[Image(labwiki_exp1_2.png, 100%)]]
     132  [[Image(labwiki_exp1_2.png, 110%)]]
    133133
    134134  3. Click on the "Start Experiment" button. You will shortly see output messages under the "Logging" section. Some of these messages are from the OMF Experiment Controller, which is interpreting your OEDL experiment description and sending corresponding commands to the resources. Other messages are from the resources themselves (either the VM nodes or the applications), reporting on configuration and command results.
    135135
    136   [[Image(labwiki_exp1_3.png, 100%)]]
     136  [[Image(labwiki_exp1_3.png, 110%)]]
    137137
    138138  4. If you scroll down below the "Logging" section or if you collapse it, you should see the graphs defined in the OEDL experiment description being drawn dynamically as measurements are collected from the resources.
    139139
    140   [[Image(labwiki_exp1_4.png, 100%)]]
     140  [[Image(labwiki_exp1_4.png, 110%)]]
    141141
    142142
     
    147147  1. A message in the "Execute" column will appear to inform you that the experiment execution has finished. At this stage, you should have the complete graphs for this experiment at the bottom of that column, which should look as follows.
    148148
    149   [[Image(labwiki_exp1_5.png, 100%)]]
     149  [[Image(labwiki_exp1_5.png, 110%)]]
    150150
    151151  2. You may interact to with these graphs, e.g. tick or un-tick the legend's keys to display only results from the first or/and second resource, hover the pointer above a graph point to display the underlying data point, drag-and-drop the graph via its icon to the "Plan" column as [http://groups.geni.net/geni/wiki/GEC18Agenda/LabWikiAndOEDL/Introduction#Execute described previously]