Version 7 (modified by 11 years ago) (diff) | ,
---|
-
WiMAX Developers Meeting
- Schedule
- Session Leaders
- Agenda / Details
- 1) Introductions
- 2) Spiral 5 Goals
- 3) Engineering and Studies
-
4) Tasks
- 4.1) Install Airspan Profile-C Base Stations
- 4.2) Build and Add Custom PC "Yellow Nodes" to WiMAX sites
- 4.3) Write and Introduce New Services: Multiple Base-Station Mgmt …
- 4.4) Support Central Monitoring by Rutgers WINLAB
- 4.5) Write and Introduce Mobility/Handover/Multi-homing Services
- 4.6) Consider WiScape Measurement Framework
- 4.7) Add WiFi AP to Support Multi-Homing
- 4.8) Acquire and Add Android Handsets
- 4.9) Add Vehicular Mobile Stations Based on Yellow Node
- 4.10) Integrate and Introduce GIMI tools
- 4.11) Add OMF/OML to WiMAX sites, and Make WiMAX Sites Accessible to …
- 4.12) Connect WiMAX Sites to Persistent I2 Backbone Network, with IP …
- 5) Status of GENI WiMAX site deployments
- 6) GENI WiMAX Experiments, Demos and Tutorials
- 7) Adjourn
- WiMAX BoF Dinner
- References
WiMAX Developers Meeting
Schedule
Sunday, 8:30-10:00am
Session Leaders
Manu Gosain GPO |
Agenda / Details
This is a tentative agenda, which may change.
NOTE: We have many topics to cover in a short time. PLEASE bring only the designated number of slides, and provide a link to additional information. THANKS!
1) Introductions
3:30pm
5min
2) Spiral 5 Goals
3:35pm
Harry Mussman (GPO)
0min
a) Where necessary, complete deployments planned for Spiral 4:
Get experimental frequency from the FCC, that does not interfere with Clearwire services
Install Airspan base station(s), with local NetSpan management system
Optional when multiple cells: backhaul control and data traffic to central equipment site
Add OMF/OML structures, including LoginService
Connect via switch to I2 backbone, via OF switches if there
WiFi access point for dual-homing operating on custom PC node
Vehicular mobile station operating on custom PC node
Fixed “mobile station” for remote experimenters operating on custom PC node
b) Plan local research experiments for Spiral 5
Focus on goals, configurations, steps
Identify necessary extended site capabilities needed in Spiral 5
c) Complete deployments of necessary extended site capabilities needed in Spiral 5, from this list of options: (technology supplier or coordinator shown)
Additional base station (Rutgers WINLAB)
Custom PC nodes ("yellow nodes") (Rutgers WINLAB)
Login Service plus OMF/OML services operating on custom PC node (Rutgers WINLAB)
Connection to I2 (coordinated by BBN)
GIMI I&M services (UMass Amherst/NYU Poly)
Multiple base-station management service operating on custom PC node (Rutgers WINLAB)
Data-path gateway service operating on custom PC node (Rutgers WINLAB)
Mobility/handover/multi-homing service (coordinated by Wisconsin/Clemson)
WiFi access point for dual-homing operating on custom PC node (Rutgers WINLAB)
Vehicular mobile station operating on custom PC node (Rutgers WINLAB)
Fixed “mobile station” for remote experimenters operating on custom PC node (Rutgers WINLAB)
Unlocked Android WiMAX/WiFi handsets. (Wisconsin)
d) Support unified GENI operations:
Forward site monitoring information to the central monitoring server (Rutgers WINLAB)
Cooperate with Rutgers WINLAB and Clearwire to avoid interference with Clearwire’s services
When necessary, do an “emergency stop” of your transmissions.
e) Complete and support experiments:
Local research experiments
Experiments by remote experimenters, including those at tutorials
Classroom instruction experiments by students (NYU Poly)
Multi-site experiments, e.g., MobilityFirst (Rutgers WINLAB)
f) Concern: how can we get all of this done?
Common platforms and services
Clear plans, good schedules
Close cooperation!!
3) Engineering and Studies
3.1) Cooperate with Clearwire
3:35pm
Ray Raychaudhuri (WINLAB), Ivan Seskar (WINLAB) and Harry Mussman (GPO)
10min
- Current approach, as an alternative to an agreement that leases Clearwire spectrum to GENI sites:
- Operate under an experimental license from the FCC; otherwise require contract between site and Clearwire, with $ and conditions
- Agreement between Rutgers WINLAB and Clearwire, on enhanced cooperation
- Maintain accurate DB of site information and contacts at Rutgers, and share with Clearwire
- Responsive local contact, at each site
- Centralized monitoring server at Rutgers WINLAB
- Ability to quickly turn off site transmitter, if interference suspected
- Possible extension: remote emergency stop, with access to GMOC
- Operate under an experimental license from the FCC; otherwise require contract between site and Clearwire, with $ and conditions
What are next steps?
- Review information on site information and site dashboard pages, and finalize
- Establish process to add site information, then maintain and track
- Establish email list for operations issues
- Provide operations interface to GMOC and Clearwire
- Complete agreement with Clearwire
- Encourage all GENI sites to obtain experimental licenses
- Include WiMAX into GENI emergency stop process
- Consider adding a WiMAX "emergency stop" button, for use by the GMOC
What is the current status?
- Working on pending agreement between WINLAB and Clearwire, to allow use of frequencies, in return for information and operations support.
- Existing sites would pay no fee.
- What happens when Sprint completes deal to buy Clearwire?
3.2) Access to Sprint Broadband Services via MVNO Arrangements
3:45pm
Jim Martin (Clemson Univ) and Harry Mussman (GPO)
10min
Discussions with Sprint and their partner, Arterra:
- Considering approach as discussed in earlier WiNTeB workshop
- Possible configuration, and cost, have been received.
- Need to complete a proposal, and submit to NSF; see slides for overview
- How much of a research market would there be for this service?
- Another advantage: provides a path to utilize (commercial) LTE
3.3) Options for Introducing LTE Equipment
3:55pm
Suman Banerjee
5min
GEC14 discussion:
Moderator: Harry Mussman (GPO)
Ray Raychaudhuri (WINLAB)
Ivan Seskar (WINLAB)
Patrick Gossman (Wayne State) The Case for LTE
Gregg Tome (Airspan)
GEC15 discussion group formed:
Moderator: Suman Banerjee (Wisconsin)
Ray Raychaudhuri (WINLAB)
Ivan Seskar (WINLAB)
Patrick Gossman (Wayne State)
Bryan Lyles (NSF)
Jacobus (Kobus) Van der Merwe (Utah) (new)
Tod Sizer (Bell Labs/Alcatel-Lucent) (new)
Walt Magnusen (Texas A&M) (new)
Harry Mussman (GPO)
What are our goals?
How do we match available: base station equipment, on-air frequencies and mobile stations?
LTE frequency bands (from Ivan)
Gregg Tome: Airspan has equipment that operates at 2.6GHz (but this is outside of EBS band)
Tod Sizer: Have used commercial small cells operating at low power, borrowed commercial spectrum, and commercial devices, in a lab setting.
Ivan and Tod: There is available open-source back-end software (Fraunhoffer?)
Walt: Has equipment to test for LTE in public safety, from General Dynamics/IPWireless
What are next steps?
- Tod to talk with Ray and Ivan
- Suman to organize calls/meetings
What is current status?
- See [http://groups.geni.net/geni/attachment/wiki/GEC16Agenda/WiMAX-Developers/banerjee-gec16.pptx slides}
- Idea: introduce on-the-air LTE in a remote location (northern Wisconsin), where no interference with anyone else
- Consider: platform based on picochip/mindspeed, plus open-source software
4) Tasks
4:00pm
4.1) Install Airspan Profile-C Base Stations
4:00pm
Manu Gosain (GPO) and Ivan Seskar (WINLAB)
6min
Airspan base stations successfully installed:
- WINLAB 1
- BBN 1
- UCLA 1
- Wayne State 1, 2
- Wisconsin 1
Airspan base stations with defects, and their current status:
- Michigan 1: Sent with RMA after power accident/fault; Received with power fixed, but RF transmitters reporting Fault; client connection fails; 3/27: actively debugging with Airspan technical support who has remote access to the base station
- Clemson 1: short outage due to GPS unit corrosion - replaced GPS and back to normal.
- Clemson 2: failed on first boot; went through circular debug-RMA request-debug-RMA request; 3/18: Airspan examined remotely, and confirmed problem needing RMA, and offered to advance ship a replacement, while Clemson returns unit.
- Clemson 3: high loss when connected to Netspan, waiting for new GPS receiver, then proceed to Airspan debug
Technical tickets: Manu has an account, track all open tickets. Airspan has remote access: Michigan 1; Clemson 2 (more?)
RMA process: Typically Manu starts, site continues, and Airspan approves; then site ships back; who pays for shipping when there is an Airspan fault? Approximate shipping costs: $300
Next steps:
- Review with Airspan ASAP, and define steps and schedule to be on-the-air soon, e.g., by end of April.
4.2) Build and Add Custom PC "Yellow Nodes" to WiMAX sites
4:05pm
Ivan Seskar (WINLAB)
10min
- These are "yellow nodes", introduced in ORBIT testbed
- Can be used as:
- General fixed servers
- Support Multiple Base-Station Mgmt Srvc
- Support Data-Path GW Srvc
- Support OMF/OML and Login services
- Provide WiFi access points
- Act as fixed "mobile stations"
- Act as vehicular mobile station (option: 12v power supply)
- General fixed servers
- Currently used by: Rutgers WINLAB; NYU Poly; BBN
- How can these be provided to sites?
- One design to serve all needs
- Approximate cost: $800 - $1500
- One design to serve all needs
- What are next steps?
- Working with other projects, refine design to balance functionality and cost, and decide what nodes are needed at which sites
- Order parts (due 11/15/12)
- Assemble and deliver to sites (due 1/15/13)
- Can a few of the current yellow nodes be delivered to sites right away with OMF/OML and new WiMAX RF AggMgr?
- Working with other projects, refine design to balance functionality and cost, and decide what nodes are needed at which sites
Revised design:
- High-speed nodes (fixed applications only)
- Low-speed nodes: (fixed or mobile applications)
Current schedule:
- Mother bods due 3/25
- metal cabinets being fabricated
- some units by mid-April
- all units by end of April
Planned allocations:
- 8 high-speed: 1 to each site
- 32 low speed: 3 to each site
Sites:
- Need to provide Ethernet switches
4.3) Write and Introduce New Services: Multiple Base-Station Mgmt Srvc and Data-Path GW Srvc
4:15pm
Ivan Seskar (Rutgers WINLAB) and Davide Pesavento (UCLA)
10min
- Multiple Base-Station Mgmt Srvc:
- 1) Have updated WiMAX RF AggMgr for NEC base station to 2.5.3+; additional updates coming
- Feeds management data to centralized DB at WINLAB, for GENI-wide monitoring
- Due: ?
- Feeds management data to centralized DB at WINLAB, for GENI-wide monitoring
- 2) New WiMAX RF AggMgr for Airspan base station
- Provides configuration, to replace Netspan; now running
- Provides node authorization, and measurements per client
- First version due: 12/15/12
- Could BBN, NYU Poly begin testing early version, to replace Netspan?
- Could early version be shipped to sites on yellow node, with OMF/OML?
- Provides configuration, to replace Netspan; now running
- 3) Build WiMAX RF AggMgr that can control multiple BSs, either NEC and/or Airspan, with same API
- Should be useful for handover/multi-homing functions: shared white list of MS, allowed to connect to one BS or another
- What other features are needed?
- First version due: 3/15/13
- Should be useful for handover/multi-homing functions: shared white list of MS, allowed to connect to one BS or another
- Data-path GW Srvc:
- Bridges each base station to global datapath
- Includes CLICK router (two types)
- Includes OpenV switch (open-source OF)
- Should be useful for handover/multi-homing functions
- First version due: 3/15/13
- Could there be an earlier version, that provides basic functions, and be manually configured?
- Could BBN, NYU Poly begin testing early version?
- Could early version be shipped to sites on yellow node?
- Bridges each base station to global datapath
What are next steps?
- Finalize features for WiMAX RF AggMgr releases (due 11/15/12)
- Establish delivery schedule for WiMAX RF AggMgr releases
- Could there be an earlier version fo WiMAX RF AggMgr, that provides just basic functions, and be manually configured? released by 11/15/12?
- Establish acceptance test plan by BBN, NYU Poly, for WiMAX RF AggMgr releases
- Finalize features for Data-path GW Srvc releases (due 11/15/12)
- Establish delivery schedule for Data-path GW Srvc releases
- Establish acceptance test plan by BBN, NYU Poly, for WiMAX RF AggMgr releases
Current design and schedule:
- See slides
- Airspan config completed, need to be tested; Manu will assist
- NEC config in progress
- Client registration in progress; needs to be done by end of April
- Ivan has updated for OMF 5.4
Recommendations for sites:
4.4) Support Central Monitoring by Rutgers WINLAB
4:25pm
Manu Gosain (GPO), Ivan Seskar (WINLAB)
0min
Current status:
Next steps:
- Remaining sites should connect, when have upgraded their WiMAX RF AggMgr.
4.5) Write and Introduce Mobility/Handover/Multi-homing Services
4:25pm
Parmesh Ramanathan (Wisconsin)
8min
- Projects requiring handover include: Clemson, Wayne State, Wisconsin and UCLA.
- Projects that can contribute handover technology include: Rutgers WINLAB and Wisconsin.
- Also, commercial handover technology available from Airspan. (Gregg Tome (Airspan))
- Layer 2 handoff
- Minimal: Mobile node breaks its connection with current WiMAX BS and then establishes connection with the new WiMAX BS
- Better: Mobile node needs two interfaces, in the simplest form, one interface always connects to BS1 while the other connects to BS2
- Need: suggested configurations, estimates of required software and level of effort
- Minimal: Mobile node breaks its connection with current WiMAX BS and then establishes connection with the new WiMAX BS
- Layer 3 handoff
- Minimal: Controller node re-routes through new BS after IP address re-write, BUT does not allow initiation of incoming connection
- Better: Use open source mobile IP s/w (Transparent Mobile IP link, and OpenFlow s/w in mobile node to de-encapsulate IP packets
- Need: suggested configurations, estimates of required software and level of effort
- Minimal: Controller node re-routes through new BS after IP address re-write, BUT does not allow initiation of incoming connection
- Suggested steps:
1) Yellow mobile nodeode with two interfaces, doing handover between two BS on the same subnet
2) Transparent MobileIP working to implement a baseline Layer 3 handover scheme
3) Support new Layer 3 solutions like Mobility First?
4) Demonstrate heterogeneous network handovers
What are next steps?
- Better define proposed configurations 1) and 2) (due 11/15/12)
- Review with other interested projects
- Understand proposed Multiple Base-Station Mgmt Srvc and Data-Path GW Srvc, and how they could be used in the implementation
- Understand how Yellow Nodes could be used in the implementation
- Understand how Android handsets could be used in the implementation
- Consider potential uses of WiScape Measurement Framework
- With other projects, define a workplan (due 12/15/12)
Current status:
- Have defined the 2 approaches; see slides
- Config 1 has been tested.
- Ready to test Config 2 when Clemson has at least 2 base stations on-the-air
4.6) Consider WiScape Measurement Framework
4:33pm
Suman Banerjee (Univ Wisc)
2min
- Overview of current functions
- slides
- A data measurement framework with APIs, that the clients and the measurement server expose
- Clients (e.g., on an Android device) measure network performance, and then report measurements to the server
- Measurement include latency, loss, throughput, TCP or UDP
- Provides feedback to network selection
- link to WiScape
- slides
What are next steps?
- Work with handover project, to see if WiScape measurement framework can be part of a GENI mobility/handover/multi-homing solution
Current status:
- See slides
- Mobility Services engine working, and has been tested.
4.7) Add WiFi AP to Support Multi-Homing
4:35pm
Manu Gosain (GPO), Ivan Seskar (WINLAB)
0min
Approach:
- Install yellow node, and use to support WiFi AP
Uses:
- MobilityFirst testing.
4.8) Acquire and Add Android Handsets
4:35pm
Derek Meyer (Univ Wisconsin)
5min
- Summary of discussions with Sprint about unlocked HTC Evo handset
- 3-way NDA was signed
- Sprint has subcontractor who handles such purchases: contact is ?
- Many handsets in warehouse, such as HTC Evo 4G; approx $300 per handset
- Must be unlocked by subcontractor, so can register with GENI network; need to provide config to subcontractor (done by Ivan)
- Must be sure can download Android apps
- 3-way NDA was signed
What are next steps?
- Working with other projects, establish how many handsets are needed at which sites
- Consider how to provide handsets to projects no longer supported by the GPO
- Complete negotiation with Sprint subcontractor (WSA Distributing), and order devices (due 12/1/12)
- Get and check samples?
- Verify operation, and loading of apps
- Deliver handsets to other projects (due 1/15/13)
- Support use by other projects
- Maintain relationship with WSA Distributing
Current status:
- Still working with WSA; have received a handset, but does not work on GENI network
- Next: sending rep a table of frequencies
- Next" send rep an "xml profile", previously used
4.9) Add Vehicular Mobile Stations Based on Yellow Node
4:40pm
Giovanni Pau (UCLA) and Ivan Seskar (WINLAB)
0min
Approach:
- Install yellow node, and use to support WiMAX modems
Uses:
- Vehicular mobility tests
Next:
- Hongwei Zhang (Wayne State Univ) will take lead
4.10) Integrate and Introduce GIMI tools
4:40pm
Fraida Fund (NYU Poly)
5min
4.11) Add OMF/OML to WiMAX sites, and Make WiMAX Sites Accessible to Experimenters
4:45pm
Fraida Fund (NYU Poly), Manu Gosain (GPO), Derek Meyer (Wisconsin),
0min
- Equip a WiMAX site with full OMF/OML capabilities, installing on VMs
- Include Login Service for Remote Users
- NYU Poly configuration:
- 1) physical host acting as base station controller, runs the asn-gw and wimaxrf AM.
- (1) and (2) run Ubuntu, (3) runs Windows.
- It has Ethernet connections to the NEC IDU, NYU-Poly network (and Internet), and very soon GENI backbone (campus IS just informed me that they will be testing that tomorrow).
- We have firewall rules set up so this host only accepts traffic from host (2) on the wimaxrf AM port. This allows us to make sure that only users with a current reservation can configure the BS.
- (1) and (2) run Ubuntu, (3) runs Windows.
- 2) physical host running OMF 5.3 AM, EC, and some other services that are useful for the testbed.
- (1) and (2) run Ubuntu, (3) runs Windows.
- It has Ethernet connections to NYU-Poly network (internet) and OMF control network.
- This is the host that testbed users log on to. We have firewall rules set up on this host so that only users with a current reservation can configure the BS or communicate with the testbed nodes.
- (1) and (2) run Ubuntu, (3) runs Windows.
- 3) physical host that serves our group website and the reservation system for the testbed. It's connected to the NYU-Poly network (and Internet)
- (1) and (2) run Ubuntu, (3) runs Windows.
- (1) and (2) run Ubuntu, (3) runs Windows.
- Our testbed nodes are scattered throughout several CS labs and research areas (not part of our group).
- They are connected to the pre-existing Ethernet jacks in the walls and floors of those rooms, which all go back to a CS server room, where we patch them through to our own (non-openflow) switch for the control network.
- We do have an openflow switch that we plan to deploy somewhere at some point.
- They are connected to the pre-existing Ethernet jacks in the walls and floors of those rooms, which all go back to a CS server room, where we patch them through to our own (non-openflow) switch for the control network.
- BBN experience (need summary)
- All services are running on the same physical machine.
- HP server that came with the base station.
- The base OS is Debian and virtual machines using for the services (Virtualbox)
- HP server that came with the base station.
- Physical machine network connections:
- Eth0 (128.105.22.xxx): University network (internet)
- Eth1 (10.3.8.126): Network to IDU of base station
- Eth2 (10.0.0.1): Control network for omf
- Eth3: Connected to openflow (physically, but not enabled until we can get a vlan tag to GENI backbone)
- Eth0 (128.105.22.xxx): University network (internet)
- Base operating system: Debian
- Virtualbox guests:
- 1. Ubuntu 9.04 -> aggmgr 5.2 -> wimaxrf service
- Eth0 (128.105.22.xxx): bridged interface to university network
- Eth1(10.3.8.254): bridged interface to base station network
- 1. Ubuntu 9.04 -> aggmgr 5.2 -> wimaxrf service
- 2. Ubuntu 10.04 -> aggmgr 5.3 -> cmcStub, Frisbee, inventory, pxe, result, saveimage
- Also expctl, resctl, and xmpp on same machine
- Eth0 (128.105.22.xxx): bridged interface to university network
- Eth1 (10.0.0.200): bridged interface to control network
- Coming: plan to federate with ProtoGENI cluster
- Reference: TridentCom 2012 : "Federating wired and wireless test facilities through Emulab and OMF: the iLab.t use case", Stefan Bouckaert (IBBT - Ghent University)
- BBN is exploring how to utilize this to better integrate WiMAX sites into GENI, and be able to utilize the GENI AM API to assgin resources.
- Reference: TridentCom 2012 : "Federating wired and wireless test facilities through Emulab and OMF: the iLab.t use case", Stefan Bouckaert (IBBT - Ghent University)
Current status:
4.12) Connect WiMAX Sites to Persistent I2 Backbone Network, with IP Routing, to Support Multi-site Experiments
4:45pm
Manu Gosain (GPO), Fraida Fund (NYU Poly), Ivan Seskar (WINLAB)
0min
- Connect a WiMAX site to the GENI I2 backbone network
- Update WiMAX RF Agg Mgr to map MS groups into VLAN tags
- Add switch
- Connect switch to I2 backbone
- VLAN connections from each site to "L2 router" at WINLAB
- Update WiMAX RF Agg Mgr to map MS groups into VLAN tags
- When can other WiMAX sites can be added?
- UCLA; has physical connection; needs to configure; when?
- Wisconsin; when?
- Clemson; when?
- UMass Amherst; has physical connection; needs to configure; when?
- UCLA; has physical connection; needs to configure; when?
- How is core network configured to support multi-site experiments?
- How is new Data-path GW Srvc use at site to interface with core network?
What are next steps? (Manu Gosain)
- Establish planned configuration (due 11/15/12)
- Establish plan with schedule to connect all sites (due 11/15/12)
- Track connection of sites, and assist them as needed
Current status:
5) Status of GENI WiMAX site deployments
4:45pm
Manu Gosain (GPO) and members of site teams
15min
Current status of GENI WiMAX site deployments
Univ Wisconsin at Madison
Suman Bannerjee:
See slides
Airspan on-the-air, throughput and range evaluated
Used by undergrad course, 80 students
Wayne State
Hongwei Zhang:
See slides
x2 Airspan operating
More at GEC16 demo
Michigan
Mehrdad Moradi:
Base station has been repaired, but still some problems.
Drexel
Ryan Measel:
x2 Airspan arrived
Waiting for site engineering work, before they can be installed
Next: temporarily install with attenuator
Clemson
KC Wang:
x1 Airspan on-the-air
x2 Airspan need repair
6) GENI WiMAX Experiments, Demos and Tutorials
6.1) Lab Experiments to Teach Wireless Basics
5:00pm
Thanasis Korakis (NYU Poly)
0min
Funded project (1/13 - 12/13) to define lab experiments for students to teach wireless basics
To be executed on GENI wireless sites, using both WiMAX and WiFi
Overview and status slides
What are next steps?
- Early versions of lab experiments to be provided by GEC16
Current status?
NYU Poly
See demo at GEC16
Univ Wisconsin at Madison
See slides
Columbia Univ
See paper at Second GENI Research and Educational Experiment Workshop (GREE2013)
6.2) Multiple Site Experiment: Mobility First
5:00pm
Kiran Nagaraja (WINLAB)
0min
GEC14 presentation:
Overview of current Mobility First multiple-site experiment.
What additions are needed?
1) Add WiFi AP to each site.
2) L2 path from MS to core
Experiment done without human intervention, by using x2 MAC addresses, and emulating packet loss to fake mobility.
Consider these as possible sites by GEC13: WINLAB; BBN; NYU Poly; UCLA; Colorado.
Current plans?
6.3) WiMAX Tutorials at GEC16
5:00pm
Organized by Fraida Fund (NYU Poly)
0min
6.4) Wireless Demos at GEC16
5:00pm 0min
Vertical Handoff Using OpenFlow
This demonstration will show how OpenFlow, Open vSwitch, and the Floodlight controller can be used as a vertical handoff solution between different network interfaces. Traffic will be generated from a server application, and with the handoff solution, will be sent using various networking interfaces to a client. The client will receive the traffic from the server. The interfaces used on the server will be alternated to show the handoff process.
Participants:
- Ryan Izard, Ryan Izard
Network Coding on ProtoGENI for Vehicular Networks
Network coding using ProtoGENI testbed will be demonstrated. By implementing network coding and multipath forwarding capabilities in the core network, this demo is designed for supporting efficient broadband data delivery in infrastructure-based vehicular networks at Clemson.
Participants:
- Ke Xu, kxu@clemson.edu
Supporting MobilityFirst in OpenFlow Based SDNs
MobilityFirst (clean slate FIA project) has some unique features such as a globally unique naming scheme (GUID), storage aware routing etc. In this demo, we use GENI resources to show that such experimental non IP features can be enabled using OpenFlow based SDNs, by writing appropriate control programs that handle them.
Participants:
- Aravind Krishnamoorthy, Aravind Krishnamoorthy
WiMAX Prototyping in Metro Detroit
Our initial coverage measurement and the tools we have developed to facilitate the road tests will be presented. We will also show the OpenXC platform and its integration with GENI, which may well benefit Wireless Vehicular Networking by offering you more insights into your car's operation.
Participants:
- Yu Chen, yuchen.wayne@gmail.com
Mobility Services Engine
A Demonstration of the Mobility Services Engine (MSE). This will be a live demonstration of the MSE using a laptop client. We will highlight some of the measurement capabilities of the system.
Participants:
- Derek Meyer, dmeyer@cs.wisc.edu
MobilityFirst Network API use in Mobile Applications
One of the key feature of the proposed MobilityFirst protocol stack is the service flexibility, with particular emphasis on multicasting and anycasting. In the demo we will show how this network service features could be easily exploited to enhance the capabilities of mobile applications through the use of the network API.
Participants:
- Ivan Seskar, Ivan Seskar
WiMAX at NYU-Poly
Demonstration of wireless lab exercises utilizing GENI WiMAX resources.
Participants:
- Fraida Fund
WiMAX DDoS Reverse Engineering
Our WiMAX research involves analyzing the cross-layer affects of the system parameters used for the Bandwidth Contention Process. We are specifically looking at how these parameters affect a subscriber station's (SS) throughput, packet loss rates, and vulnerability to Distributed Denial of Service (DDoS) attacks. Software simulations use the NS-2 simulator and hardware simulations are being conducted on ORBIT. The parameters investigated are request retires, backoff start, backoff end and frame duration.
Participants:
- Katherine Cameron, kccamer@clemson.edu
7) Adjourn
5:00pm
WiMAX BoF Dinner
Please join us for a [TBD WiMAX BoF dinner] on Wednesday evening. Please indicate on this poll, if you will be attending.
References
R1) Airspan Profile-C Base Station, with Associated Hardware and Software
Ivan Seskar (WINLAB) and Harry Mussman (GPO)
a) Choice of Airspan to provide a WiMAX base station for new GENI WiMAX sites
NEC is not able to provide a WiMAX base station for new GENI WiMAX sites
WINLAB and the GPO have decided to purchase base stations from Airspan, a commercial company pursuing target customers such as universities and small carriers.
For example, the Univ of Colorado at Boulder IT Dept has installed an Airspan system with 4 sectors, that covers the campus. They have been pleased with Airspan.
WINLAB has a frim quote from Airspan for their MacroMAXe profile-C WiMAX base station unit, and related items.
Airspan brochure
MacroMAXe Product Specification
Airspan Deployment Plan for Univ Colorado at Boulder
b) Rutgers will provide a kit including:
Airspan MacroMAXe profile-C WiMAX base station unit, for outside mounting
Choice of frequency:
(2510 Lo: 2496MHz to 2570MHz)
(2510 Mid: 2560MHz to 2630MHz)
(2510 Hi: 2620MHz to 2690MHz)
(3650: 3650MHz to 3700MHz)]
NOTE: WINLAB needs to know frequency choices during November (or early December), so that they can place an order with Airspan for delivery late 2011 or early 2012!
Sector antenna, with x4 RF jumper cables
2x4 MIMO, supported by base station and antenna
GPS antenna, with surge suppressor and cable
DC power cable, from base station unit (outside) to testbed (inside)
Network management software license, 1 per base station
c) Campus will need to provide:
Pole for mounting
DC power supply (-48v, approx 300W)
Ethernet cable, from base station unit (outside) to testbed (inside); consider copper (may be a problem with lightning surge) or fiber (requires MM fiber cable, and fiber interface on switch)
Windows server to host network management software
Linux server to host OMF software
Ethernet switches, and other network equipment, for access (configuration to be provided)
d) Additional kits can be purchased from Airspan
Price is approximately $15,000.
e) It is expected that additional base stations kits will be purchased for some (or all) Sol 3 GENI sites in Spiral 5.
Thus, campus site might be able to add additional sectors, at no cost.
Planning for next year will be done later this year.
Consider including additional sectors within your technical plan right away.
f) Note: Airspan indicates that they expect to introduce a new base station unit within the next year.
Somewhat reduced performance/range.
Approximately half the cost
g) Airspan indicates that their sector antenna provides:
A 90degree pattern, which is consistent with proper coverage over a 120degree sector.
Four internal elements, to support 2x4 MIMO.
Airspan can provide provide x4 omni-directional antennas, but the cost is much higher, and the range is signifcantly reduced.
h) Airspan shows that their profile-C base station unit can be configured to operate without an ASN GW and without a RADIUS (authentication) server.
In this mode, a list of allowed base stations must be configured into the base station, and groups of these base stations are mapped to a VLAN on the ethernet port.
This appears to be consistent with the current NEC base station unit operated with the ASN GW/WiMAX RF AggMgr code that has been provided by Rutgers/WINLAB
MacroMAXe Configuration Guide
i) Airspan shows that if handover operation is desired, an ASN GW must be provided, plus typically an associated RADIUS (authentication) server.
In this case, the base station unit operates with IP at the interface.
j) Airspan installation instructions link
R2) Netspan Network Management System for Airspan Base Station
Manu Gosain (GPO)
- Suggest: add Netspan system at each site with Airspan base station
- Requires: Windows server
- Use: setup of Netspan base station to provide basic functions
- Coming: replace with new WiMAX RF AggMgr
Attachments (1)
-
2013_07_21_WiMAX-Handset_Update.pdf (143.0 KB) - added by 11 years ago.
UW-Madison Updates
Download all attachments as: .zip