Changes between Version 1 and Version 2 of GEC17Agenda/GettingStartedWithGENI_III_GIMI/Procedure

06/20/13 16:49:33 (8 years ago)



  • GEC17Agenda/GettingStartedWithGENI_III_GIMI/Procedure

    v1 v2  
    22= Title of the Experiment =
    33== Overview: ==
    4     This is a description of what the experimenter is going to do in this tutorial.  The tutorial is going to show her something very cool and I want the experimenter to have a good picture in her head of what she is going to be doing.  She should know what knowledge she is going to walk away with at the end.  A very basic diagram of the experiment will go a long way toward giving her the big picture:
     4The objective of this tutorial is to introduce the GIMI tool set to experimenters who are interested in performing
     5experiments on ExoGENI slices.
     6We will introduce an experiment workflow which experimenters will most likely apply to perform measurements.
    6 [[Image(ExampleDiagram.jpg)]]
     8After the tutorial, experimenters should be able to:
     9 * Create a slice on ExoGENI and run an experiment on top of this slice.
     10 * Orchestrate experiments with OMF:
     11    * Set up routing on top of topology
     12    * Verify that topology has been set up correctly
     13    * Execute an experiment that measures the impact of packet size on throughput by comparing udp output at the sender and udp input at the receiver.
     14 * Store and retrieve data to/from iRODS
     15 * Analyze/visualize measurement data with various tools
    820== Prerequisites: ==