= [http://groups.geni.net/geni/wiki/GEC17Agenda/GettingStartedWithGENI_II/Exercise2/Procedure Getting Started With GENI - Part 2 Exercise 2] =
{{{
#!html


<div style="text-align:center; width:495px; margin-left:auto; margin-right:auto;">
<img id="Image-Maps_5201305222028436" src="http://groups.geni.net/geni/attachment/wiki/GENIExperimenter/Tutorials/Graphics/Setup.jpg?format=raw" usemap="#Image-Maps_5201305222028436" border="0" width="495" height="138" alt="" />
<map id="_Image-Maps_5201305222028436" name="Image-Maps_5201305222028436">
<area shape="rect" coords="18,18,135,110" href="./DesignSetup" alt="" title=""    />
<area shape="rect" coords="180,18,297,111" href="./Execute" alt="" title=""    />
<area shape="rect" coords="344,17,460,110" href="./Finish" alt="" title=""    />
<area shape="rect" coords="493,136,495,138" href="http://www.image-maps.com/index.php?aff=mapped_users_5201305222028436" alt="Image Map" title="Image Map" />
</map>
<!-- Image map text links - End - -->

</div>
}}}



== 1.  Design the Experiment ==
  
In today's experiment you will use resources from the aggregate listed on your worksheet.


== 1.1  Obtain Resources ==

You can use Flack or Omni to create your slice and allocate resources.  The instructions here assume you are using Flack.

On your portal home page, find the project (GEC17).  Click on the project name and find the slice you created earlier in this tutorial.


=== 1.2 Reserve Two Virtual Machines at One Aggregate ===
We will use the same topology used in the previous exercises: Two nodes connected by a link.

'''If you are using an ExoGENI Rack:''' The RSpec you will need is at http://protogeni.net/gec17tut2eg.rspec.

'''If you are using an InstaGENI Rack:'''  The RSpec you will need is at http://protogeni.net/gec17tut2.rspec.

You can import this RSpec into Flack or use it with Omni.  Please use the same aggregate (rack) you used for your other exercises.  

Wait until the Flack canvas turns green.  If you are using Omni, wait until readyToLogin.py tells you your resources are ready and gives you ssh commands you can use to log into your nodes.

'''ExoGENI Only:'''  When the Flack canvas turns green you will notice the nodes do have have ssh information available.  You will have to refresh your slice by clicking on the green "refresh" button to the right of the "Submit" button.  Click "yes" when you get the pop-up asking if you really want to refresh the slice.  After the slice is refreshed, you should see ssh information (ip address and port number) next to the node icons.

=== 1.3 Note the ssh information for the server and client nodes ===
In you worksheet, write down the IP addresses and port numbers used to ssh into the server and client nodes.

----
= [wiki:GEC17Agenda/GettingStartedWithGENI_II/Exercise2/Procedure Introduction] =
= [wiki:GEC17Agenda/GettingStartedWithGENI_II/Exercise2/Procedure/Execute Next:  Execute] =