Changes between Version 40 and Version 41 of GEC17Agenda/GettingStartedWithGENI_I/Procedure/Execute

Timestamp:

07/17/13 21:23:34 (11 years ago)

Author:

sedwards@bbn.com

Comment:

--

GEC17Agenda/GettingStartedWithGENI_I/Procedure/Execute

@@ -221 +221 @@
 GENI provides the capability of running non-IP experiments, since you can connect your hosts at Layer 2. For the purpose of this tutorial we will use a very simple Layer 2 ping program that sends packets using a custom ethernet type. 
 
-    1. ExoGENI nodes run a service called "neuca" that managed network interfaces on the node.  To manually adjust the IP address, we must first disable neuca.
+    1. ExoGENI nodes run a service called "neuca" that managed network interfaces on the node.  To manually adjust the IP address, we must first disable neuca on both VMs.
 {{{
 service neuca stop
@@ -237 +237 @@
 </table>
 }}}
-    1. Disable the IP on your nodes (being careful to disable IP on the data interface NOT the control interface).
+    1. Disable the IP on both of your nodes (being careful to disable IP on the data interface NOT the control interface).
        In each of the terminals type:
 {{{