Changes between Version 42 and Version 43 of GEC17Agenda/GettingStartedWithGENI_I/Procedure/DesignSetup


Ignore:
Timestamp:
07/12/13 18:54:14 (11 years ago)
Author:
sedwards@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GEC17Agenda/GettingStartedWithGENI_I/Procedure/DesignSetup

    v42 v43  
    305305            <li>In the field at the top, replace "VM" with "client".</li>
    306306            <li>If you are using an ExoGENI rack, set the "Sliver Type" to "ECM1Small".</li>
     307            <li>Now click on the "Interfaces and Links" (middle tab with the "link" symbol".</li>
     308            <li>Enter the Desired IP Address for this node.</li>
     309            <li>Enter the Desired Mask of <pre>255.255.255.0</pre>.</li>
    307310            <li>Then Press "Apply" at the bottom of the screen.</li>
    308311            <li>Repeat the above three steps for the second VM, labeling it "server".</li>