Changes between Version 57 and Version 58 of GEC17Agenda/AdvancedOpenFlow/Procedure/Execute


Ignore:
Timestamp:
03/09/14 21:53:52 (6 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC17Agenda/AdvancedOpenFlow/Procedure/Execute

    v57 v58  
    7474
    7575=== 3.1 Start your experiment with existing configuration ===
    76    - '''3.1.1''' Start the controller on switch. An example OpenFlow Controller that assigns incoming TCP connections to alternating paths '''based on total number of flows''' (round robin) is already downloaded for you. You can find it (load-balancer.rb) in the home directory on node "Switch". [[BR]]
     76   - '''3.1.1''' Start the controller on switch.
     77   An example OpenFlow Controller that assigns incoming TCP connections to alternating paths '''based on total number of flows''' (round robin) is already downloaded for you. You can find it (load-balancer.rb) in the home directory on node "Switch". [[BR]]
    7778   After you started your Load Balancer, you should be able to see the following (Switch id may vary):
    7879   {{{
     
    8182  }}}
    8283  This means the OpenFlow Switch is connected to your controller and you can start testing your OpenFlow Load Balancer now.
    83    - '''3.1.1''' Drag the `file Icon` at the left-top corner on your !LabWiki page from `Prepare` column and drop it to `Execute` column. Fill in the name of your !LabWiki experiment (this can be anything that does not contain spaces, it is just to help you track the experiments you run), select your project from the drop-down list, select your slice from the list, and type "true" in the graph box to enable graphs. You can also create an experiment context if you wish to save each run of the experiment separately (Click on Add Context in the top right hand corner of the page). Then press the "Start Experiment" button.
    84 
    85 '''Note''':  You should change the slice name in the property bar to represent your slice name in the Execute window before you click on 'Start Experiment'.
     84   - '''3.1.2''' Start your experiment in !LabWiki.
     85     * '''3.1.2.1''' Drag the `file Icon` at the left-top corner on your !LabWiki page from `Prepare` column and drop it to `Execute` column.
     86     * '''3.1.2.2''' Fill in the the experiment properties in the `Execute` column:
     87        * name of your !LabWiki experiment (this can be anything that does not contain spaces, it is just to help you track the experiments you run)
     88        * select your project from the drop-down list
     89        * select your slice from the list,
     90        * fill in the left and right interfaces for the `switch` node as you gathered them at step '''2.2.1'''
     91     * '''3.1.2.3''' Press the "Start Experiment" button.
    8692
    8793   - '''3.1.2''' When your experiment is finished, kill the iperf processes on `outside` and `inside` nodes. On both nodes do: