Changes between Version 17 and Version 18 of GEC17Agenda/AdvancedOpenFlow/Procedure/Execute

Timestamp:

11/20/13 17:11:52 (10 years ago)

Author:

divyashri.bhat@gmail.com

Comment:

--

GEC17Agenda/AdvancedOpenFlow/Procedure/Execute

@@ -40 +40 @@
   
 === 2.2. Configure !LabWiki to orchestrate and monitor your experiment ===
-   - '''2.2.1''' Log on to !LabWiki on http://emmy9.casa.umass.edu:3005 , on the `Prepare` Column, type "gec17" and choose `gec17-advOF-script.rb` file.
+   - '''2.2.1''' Log on to !LabWiki on http://emmy9.casa.umass.edu:4000 , on the `Prepare` Column, type "gec17" and choose `gec17-advOF-script.rb` file.
    - '''2.2.2''' On the terminal where you are logged in on node "Switch", rerun "ifconfig" to see the IP addresses on each interface. 
     [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:warning-icon-hi.png,5%)]] You may not be able to see all interfaces up immediately when node "Switch" is ready; wait for some more time (about 1 min) then try "ifconfig" again.
@@ -54 +54 @@
 == 3. Run your experiment ==
 === 3.1 Start your experiment with existing configuration ===
-   - '''3.1.1''' Drag the `file Icon` at the left-top corner on your !LabWiki page from `Prepare` column and drop it to `Execute` column. Fill in the name of your !LabWiki experiment (this can be anything, it is just to help you track the experiments you run), the name of your slice (this has to be your slice name), and type "true" in the graph box to enable graphs. Then press the "Start Experiment" button. 
+   - '''3.1.1''' Drag the `file Icon` at the left-top corner on your !LabWiki page from `Prepare` column and drop it to `Execute` column. Fill in the name of your !LabWiki experiment (this can be anything that does not contain spaces, it is just to help you track the experiments you run), select your project from the drop-down list, select your slice from the list, and type "true" in the graph box to enable graphs. You can also create an experiment context if you wish to save each run of the experiment separately (Click on Add Context in the top right hand corner of the page). Then press the "Start Experiment" button. 
    - '''3.1.2''' When your experiment is finished, turn off your controller and disconnect the switch from your controller: 
       - On node "Switch", press "Ctrl" and "c" key to kill your Load Balancer process on node "Switch"
@@ -108 +108 @@
 
 === 3.4 Automate your experiment using !LabWiki ===
- - '''3.4.1''' Add code in your !LabWiki script to automate starting and stoping your OpenFlow Controller: 
+ - '''3.4.1''' Add code in your !LabWiki script to automate starting and stopping your OpenFlow Controller: 
   - '''3.4.1.1''' Go back to your !LabWiki page, un-comment the script from line 184 to line 189 to start your OpenFlow Controller automatically on !LabWiki
    [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] You might need to change line 185 to use the correct load balancer controller