Changes between Version 16 and Version 17 of GEC17Agenda/AdvancedOpenFlow/Procedure/Execute


Ignore:
Timestamp:
07/20/13 02:26:09 (8 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC17Agenda/AdvancedOpenFlow/Procedure/Execute

    v16 v17  
    9898  - If you really do not know where to start after reading the hints, the answer can be found on node "Switch", at /tmp/load-balancer/load-balancer-solution.rb
    9999  - Copy the above solution into your home directory then re-do the experiment on !LabWiki.
    100   [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] you need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb")
     100  [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] You need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb")
    101101 - Reren the experiment using your new OpenFlow Controller following steps in Section 2.5, check the graphs plotted on !LabWiki as well as the controller's log on node "Switch" and see the difference.
    102102 - When your experiment is done, you need to stop the Load Balancer: