Changes between Version 14 and Version 15 of GEC17Agenda/AdvancedOpenFlow/Procedure/Execute


Ignore:
Timestamp:
07/20/13 02:24:35 (8 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC17Agenda/AdvancedOpenFlow/Procedure/Execute

    v14 v15  
    9898  - If you really do not know where to start after reading the hints, the answer can be found on node "Switch", at /tmp/load-balancer/load-balancer-solution.rb
    9999  - Copy the above solution into your home directory then re-do the experiment on !LabWiki.
    100 
    101      [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] you need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb")
     100  [[BR]][[Image(GENIExperimenter/Tutorials/Graphics:4NotesIcon_512x512.png,5%)]] you need to change your script to use the correct Load Balancing controller (e.g., if your controller is "load-balancer-solution.rb", you should run "/opt/trema-trema-f995284/trema run /root/load-balancer-solution.rb")
    102101 - Reren the experiment using your new OpenFlow Controller following steps in Section 2.5, check the graphs plotted on !LabWiki as well as the controller's log on node "Switch" and see the difference.
    103102 - When your experiment is done, you need to stop the Load Balancer: