Changes between Version 8 and Version 9 of GEC17Agenda/AdvancedOpenFlow/Procedure/Appendices


Ignore:
Timestamp:
03/09/14 22:20:41 (10 years ago)
Author:
nriga@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GEC17Agenda/AdvancedOpenFlow/Procedure/Appendices

    v8 v9  
    338338You will find it helpful to know what is going on inside your OpenFlow controller and its associated switch when implementing these exercises. [[BR]]
    339339This section contains a few tips that may help you out if you are using the Open vSwitch implementation provided with this tutorial.
    340 If you are using a hardware OpenFlow switch, your instructor can help you find equivalent commands. [[BR]]
    341 The Open vSwitch installation provided by the RSpec included in this tutorial is located in ''/opt/openvswitch-1.6.1-F15''. You will find Open vSwitch commands in ''/opt/openvswitch-1.6.1-F15/bin'' and ''/opt/openvswitch-1.6.1-F15/sbin''. Some of these commands may be helpful to you. If you add these paths to your shell’s ''$PATH'', you will be able to access their manual pages with man. Note that ''$PATH'' will not affect sudo, so you will still have to provide the absolute path to sudo; the absolute path is omitted from the following examples for clarity and formatting.
     340If you are using a hardware OpenFlow switch, your instructor can help you find equivalent commands. [[BR]]
    342341
    343342 - '''ovs-vsctl'''[[BR]]