[[PageOutline]] = WiMAX Developers Meeting at GEC-16 = == Schedule == Tuesday, March 19, 3:30pm - 5pm [[BR]] Room: City Creek Room [[BR]] Session leader: Harry Mussman (GENI Project Office, Raytheon BBN Technologies) [[BR]] == Pre-Requisites == None == Description == First, this session will briefly review Spiral 5 goals for GENI WiMAX campus deployments and experiments. [[BR]] Then, it will the status of on-going studies and several WiMAX deployment tasks. [[BR]] Finally, it will review the status of GENI WiMAX campus deployments and extensions, plus plans for local experiments. [[BR]] == Agenda == This is a tentative agenda, which may change. [[BR]] NOTE: We have many topics to cover in a short time. PLEASE bring only the designated number of slides, and provide a link to additional information. THANKS! [[BR]] == 1) Introductions == 3:30pm [[BR]] 5min [[BR]] == 2) Spiral 5 Goals == 3:35pm [[BR]] Harry Mussman (GPO) [[BR]] 0min [[BR]] a) Where necessary, complete deployments planned for Spiral 4: [[BR]] Get experimental frequency from the FCC, that does not interfere with Clearwire services [[BR]] Install Airspan base station(s), with local NetSpan management system [[BR]] Optional when multiple cells: backhaul control and data traffic to central equipment site [[BR]] Add OMF/OML structures, including LoginService [[BR]] Connect via switch to I2 backbone, via OF switches if there [[BR]] WiFi access point for dual-homing operating on custom PC node [[BR]] Vehicular mobile station operating on custom PC node [[BR]] Fixed “mobile station” for remote experimenters operating on custom PC node [[BR]] b) Plan local research experiments for Spiral 5 [[BR]] Focus on goals, configurations, steps [[BR]] Identify necessary extended site capabilities needed in Spiral 5 [[BR]] c) Complete deployments of necessary extended site capabilities needed in Spiral 5, from this list of options: (technology supplier or coordinator shown) [[BR]] Additional base station (Rutgers WINLAB) [[BR]] Custom PC nodes ("yellow nodes") (Rutgers WINLAB) [[BR]] Login Service plus OMF/OML services operating on custom PC node (Rutgers WINLAB) [[BR]] Connection to I2 (coordinated by BBN) [[BR]] GIMI I&M services (UMass Amherst/NYU Poly) [[BR]] Multiple base-station management service operating on custom PC node (Rutgers WINLAB) [[BR]] Data-path gateway service operating on custom PC node (Rutgers WINLAB) [[BR]] Mobility/handover/multi-homing service (coordinated by Wisconsin/Clemson) [[BR]] WiFi access point for dual-homing operating on custom PC node (Rutgers WINLAB) [[BR]] Vehicular mobile station operating on custom PC node (Rutgers WINLAB) [[BR]] Fixed “mobile station” for remote experimenters operating on custom PC node (Rutgers WINLAB) [[BR]] Unlocked Android WiMAX/WiFi handsets. (Wisconsin) [[BR]] d) Support unified GENI operations: [[BR]] Forward site monitoring information to the central monitoring server (Rutgers WINLAB) [[BR]] Cooperate with Rutgers WINLAB and Clearwire to avoid interference with Clearwire’s services [[BR]] When necessary, do an “emergency stop” of your transmissions. [[BR]] e) Complete and support experiments: [[BR]] Local research experiments [[BR]] Experiments by remote experimenters, including those at tutorials [[BR]] Classroom instruction experiments by students (NYU Poly) [[BR]] Multi-site experiments, e.g., MobilityFirst (Rutgers WINLAB) [[BR]] f) Concern: how can we get all of this done? [[BR]] Common platforms and services [[BR]] Clear plans, good schedules [[BR]] Close cooperation!! [[BR]] == 3) Engineering and Studies == === 3.1) Cooperate with Clearwire === 3:35pm [[BR]] Ray Raychaudhuri (WINLAB), Ivan Seskar (WINLAB) and Harry Mussman (GPO)[[BR]] 10min * Current approach, as an alternative to an agreement that leases Clearwire spectrum to GENI sites: [[BR]] * Operate under an experimental license from the FCC; otherwise require contract between site and Clearwire, with $ and conditions [[BR]] * Agreement between Rutgers WINLAB and Clearwire, on enhanced cooperation [[BR]] * Maintain accurate DB of site information and contacts at Rutgers, and share with Clearwire [[BR]] * Responsive local contact, at each site [[BR]] * Centralized monitoring server at Rutgers WINLAB [[BR]] * Ability to quickly turn off site transmitter, if interference suspected [[BR]] * Possible extension: remote emergency stop, with access to GMOC [[BR]] * [http://wimax.orbit-lab.org/wiki/WiMAX/00/01#a1.3GENICampusDeployments GENI WiMAX Site Operations Resources] [[BR]] * [http://oml.orbit-lab.org:4040/tab/home_tab GENI WiMAX Site Monitoring Dashboard] [[BR]] What are next steps? [[BR]] * Review information on site information and site dashboard pages, and finalize [[BR]] * Establish process to add site information, then maintain and track [[BR]] * Establish email list for operations issues [[BR]] * Provide operations interface to GMOC and Clearwire [[BR]] * Complete agreement with Clearwire [[BR]] * Encourage all GENI sites to obtain experimental licenses [[BR]] * Include WiMAX into GENI emergency stop process [[BR]] * Consider adding a WiMAX "emergency stop" button, for use by the GMOC [[BR]] What is the current status? [[BR]] * Working on pending agreement between WINLAB and Clearwire, to allow use of frequencies, in return for information and operations support. [[BR]] * Existing sites would pay no fee. [[BR]] * What happens when Sprint completes deal to buy Clearwire? [[BR]] === 3.2) Access to Sprint Broadband Services via MVNO Arrangements === 3:45pm [[BR]] Jim Martin (Clemson Univ) and Harry Mussman (GPO) [[BR]] 10min [[BR]] Discussions with Sprint and their partner, Arterra: [[BR]] * Considering approach as discussed in earlier WiNTeB workshop * Possible configuration, and cost, have been received. * Need to complete a proposal, and submit to NSF. * How much of a ressearch market would there be for this service? * Another advantage: provides a path to utilize (commercial) LTE === 3.3) Options for Introducing LTE Equipment === 3:55pm [[BR]] Suman Banerjee [[BR]] 5min [[BR]] GEC14 discussion: [[BR]] Moderator: Harry Mussman (GPO) [[BR]] Ray Raychaudhuri (WINLAB) [[BR]] Ivan Seskar (WINLAB) [[BR]] Patrick Gossman (Wayne State) [http://groups.geni.net/geni/attachment/wiki/GEC13Agenda/WiMAXPlanning/The%20Case%20for%20LTE.pptx The Case for LTE] [[BR]] Gregg Tome (Airspan) [[BR]] GEC15 discussion group formed: [[BR]] Moderator: Suman Banerjee (Wisconsin) [[BR]] Ray Raychaudhuri (WINLAB) [[BR]] Ivan Seskar (WINLAB) [[BR]] Patrick Gossman (Wayne State) [[BR]] Bryan Lyles (NSF) [[BR]] Jacobus (Kobus) Van der Merwe (Utah) (new) [[BR]] Tod Sizer (Bell Labs/Alcatel-Lucent) (new) [[BR]] Walt Magnusen (Texas A&M) (new) [[BR]] Harry Mussman (GPO) [[BR]] What are our goals? [[BR]] How do we match available: base station equipment, on-air frequencies and mobile stations? [[BR]] [http://niviuk.free.fr/lte_band.php LTE frequency bands (from Ivan)] [[BR]] Gregg Tome: Airspan has equipment that operates at 2.6GHz (but this is outside of EBS band) [[BR]] Tod Sizer: Have used commercial small cells operating at low power, borrowed commercial spectrum, and commercial devices, in a lab setting. [[BR]] Ivan and Tod: There is available open-source back-end software (Fraunhoffer?) [[BR]] Walt: Has equipment to test for LTE in public safety, from General Dynamics/IPWireless [[BR]] What are next steps? [[BR]] * Tod to talk with Ray and Ivan [[BR]] * Suman to organize calls/meetings [[BR]] What is current status? [[BR]] * See [ slides} * Idea: introduce on-the-ari LTE in a remote location (northern Wisconsin), where no interference with anyone else * Consider: platform based on picochip/mindspeed, plus open-source software == 4) Tasks == 4:00pm [[BR]] === 4.1) Install Airspan Profile-C Base Stations === 4:00pm [[BR]] Manu Gosain (GPO) and Ivan Seskar (WINLAB) [[BR]] 6min [[BR]] Airspan base stations successfully installed: [[BR]] * WINLAB 1 * BBN 1 * UCLA 1 * Wayne State 1, 2 * Wisconsin 1 Airspan base stations with defects, and their current status: [[BR]] * Michigan 1: Sent with RMA after power accident/fault; Received with power fixed, but RF transmitters reporting Fault; client connection fails; 3/27: actively debugging with Airspan technical support who has remote access to the base station * Clemson 1: short outage due to GPS unit corrosion - replaced GPS and back to normal. * Clemson 2: failed on first boot; went through circular debug-RMA request-debug-RMA request; 3/18: Airspan examined remotely, and confirmed problem needing RMA, and offered to advance ship a replacement, while Clemson returns unit. * Clemson 3: high loss when connected to Netspan, waiting for new GPS receiver, then proceed to Airspan debug Technical tickets: Manu has an account, track all open tickets. Airspan has remote access: Michigan 1; Clemson 2 (more?) RMA process: Typically Manu starts, site continues, and Airspan approves; then site ships back; who pays for shipping when there is an Airspan fault? Approximate shipping costs: $300 Next steps: [[BR]] * Review with Airspan ASAP, and define steps and schedule to be on-the-air === 4.2) Build and Add Custom PC "Yellow Nodes" to WiMAX sites === 4:05pm [[BR]] Ivan Seskar (WINLAB) [[BR]] 10min [[BR]] * These are "yellow nodes", introduced in ORBIT testbed [[BR]] * Can be used as: [[BR]] * General fixed servers [[BR]] * Support Multiple Base-Station Mgmt Srvc [[BR]] * Support Data-Path GW Srvc [[BR]] * Support OMF/OML and Login services [[BR]] * Provide WiFi access points [[BR]] * Act as fixed "mobile stations" [[BR]] * Act as vehicular mobile station (option: 12v power supply) [[BR]] * Currently used by: Rutgers WINLAB; NYU Poly; BBN [[BR]] * How can these be provided to sites? [[BR]] * One design to serve all needs [[BR]] * Approximate cost: $800 - $1500 [[BR]] * What are next steps? [[BR]] * Working with other projects, refine design to balance functionality and cost, and decide what nodes are needed at which sites [[BR]] * Order parts (due 11/15/12) [[BR]] * Assemble and deliver to sites (due 1/15/13) [[BR]] * Can a few of the current yellow nodes be delivered to sites right away with OMF/OML and new WiMAX RF AggMgr? [[BR]] Revised design: [[BR]] * High-speed nodes (fixed applications only) * Low-speed nodes: (fixed or mobile applications) Current schedule: [[BR]] Planned allocations: [[BR]] * 8 high-speed * 32 low speed === 4.3) Write and Introduce New Services: Multiple Base-Station Mgmt Srvc and Data-Path GW Srvc === 4:15pm [[br]] Ivan Seskar (Rutgers WINLAB) and Davide Pesavento (UCLA) [[BR]] 10min [[BR]] * Multiple Base-Station Mgmt Srvc: [[BR]] * 1) Have updated WiMAX RF AggMgr for NEC base station to 2.5.3+; additional updates coming [[BR]] * Feeds management data to centralized DB at WINLAB, for GENI-wide monitoring [[BR]] * Due: ? [[BR]] * 2) New WiMAX RF AggMgr for Airspan base station [[BR]] * Provides configuration, to replace Netspan; now running [[BR]] * Provides node authorization, and measurements per client [[BR]] * First version due: 12/15/12 [[BR]] * Could BBN, NYU Poly begin testing early version, to replace Netspan? [[BR]] * Could early version be shipped to sites on yellow node, with OMF/OML? [[BR]] * 3) Build WiMAX RF AggMgr that can control multiple BSs, either NEC and/or Airspan, with same API [[BR]] * Should be useful for handover/multi-homing functions: shared white list of MS, allowed to connect to one BS or another [[BR]] * What other features are needed? [[BR]] * First version due: 3/15/13 [[BR]] * Data-path GW Srvc: [[BR]] * Bridges each base station to global datapath [[BR]] * Includes CLICK router (two types) [[BR]] * Includes OpenV switch (open-source OF) [[BR]] * Should be useful for handover/multi-homing functions [[BR]] * First version due: 3/15/13 [[BR]] * Could there be an earlier version, that provides basic functions, and be manually configured? * Could BBN, NYU Poly begin testing early version? [[BR]] * Could early version be shipped to sites on yellow node? [[BR]] What are next steps? [[BR]] * Finalize features for WiMAX RF AggMgr releases (due 11/15/12) [[BR]] * Establish delivery schedule for WiMAX RF AggMgr releases [[BR]] * Could there be an earlier version fo WiMAX RF AggMgr, that provides just basic functions, and be manually configured? released by 11/15/12? [[BR]] * Establish acceptance test plan by BBN, NYU Poly, for WiMAX RF AggMgr releases [[BR]] * Finalize features for Data-path GW Srvc releases (due 11/15/12) [[BR]] * Establish delivery schedule for Data-path GW Srvc releases [[BR]] * Establish acceptance test plan by BBN, NYU Poly, for WiMAX RF AggMgr releases [[BR]] Current design: [[BR]] Current schedule: [[BR]] Recommendations for sites: [[BR]] === 4.4) Support Central Monitoring by Rutgers WINLAB === 4:25pm [[BR]] Manu Gosain (GPO), Ivan Seskar (WINLAB) [[BR]] 0min [[BR]] Current status: [[BR]] * [http://oml.orbit-lab.org:4040/tab/home_tab GENI WiMAX Site Monitoring Dashboard] Next steps: [[BR]] === 4.5) Write and Introduce Mobility/Handover/Multi-homing Services === 4:25pm [[BR]] Parmesh Ramanathan (Wisconsin) [[BR]] 8min [[BR]] * Projects requiring handover include: Clemson, Wayne State, Wisconsin and UCLA. [[BR]] * Projects that can contribute handover technology include: Rutgers WINLAB and Wisconsin. [[BR]] * Also, commercial handover technology available from Airspan. (Gregg Tome (Airspan)) [[BR]] * [http://groups.geni.net/geni/attachment/wiki/GEC15Agenda/WiMAXUpdate/handover_parmesh%20%20GEC15.pptx slides] [[BR]] * Layer 2 handoff * Minimal: Mobile node breaks its connection with current WiMAX BS and then establishes connection with the new WiMAX BS [[BR]] * Better: Mobile node needs two interfaces, in the simplest form, one interface always connects to BS1 while the other connects to BS2 [[BR]] * Need: suggested configurations, estimates of required software and level of effort [[BR]] * Layer 3 handoff * Minimal: Controller node re-routes through new BS after IP address re-write, BUT does not allow initiation of incoming connection [[BR]] * Better: Use open source mobile IP s/w (Transparent Mobile IP [http://sourceforge.net/projects/tmip/ link], and OpenFlow s/w in mobile node to de-encapsulate IP packets [[BR]] * Need: suggested configurations, estimates of required software and level of effort [[BR]] * Suggested steps: [[BR]] 1) Yellow mobile nodeode with two interfaces, doing handover between two BS on the same subnet [[BR]] 2) Transparent MobileIP working to implement a baseline Layer 3 handover scheme [[BR]] 3) Support new Layer 3 solutions like Mobility First? [[BR]] 4) Demonstrate heterogeneous network handovers [[BR]] What are next steps? [[BR]] * Better define proposed configurations 1) and 2) (due 11/15/12) [[BR]] * Review with other interested projects [[BR]] * Understand proposed Multiple Base-Station Mgmt Srvc and Data-Path GW Srvc, and how they could be used in the implementation [[BR]] * Understand how Yellow Nodes could be used in the implementation [[BR]] * Understand how Android handsets could be used in the implementation [[BR]] * Consider potential uses of WiScape Measurement Framework [[BR]] * With other projects, define a workplan (due 12/15/12) [[BR]] Current status: [[BR]] === 4.6) Consider WiScape Measurement Framework === 4:33pm [[BR]] Suman Banerjee (Univ Wisc) [[BR]] 2min [[BR]] * Overview of current functions [[BR]] * [http://groups.geni.net/geni/attachment/wiki/GEC15Agenda/WiMAXUpdate/mse-banerjee.pdf slides] [[BR]] * A data measurement framework with APIs, that the clients and the measurement server expose [[BR]] * Clients (e.g., on an Android device) measure network performance, and then report measurements to the server [[BR]] * Measurement include latency, loss, throughput, TCP or UDP [[BR]] * Provides feedback to network selection [[BR]] * [http://wiscape.wings.cs.wisc.edu/new_wiscape/index.php link to WiScape] [[BR]] What are next steps? [[BR]] * Work with handover project, to see if WiScape measurement framework can be part of a GENI mobility/handover/multi-homing solution [[BR]] Current status: [[BR]] === 4.7) Add WiFi AP to Support Multi-Homing === 4:35pm [[BR]] Manu Gosain (GPO), Ivan Seskar (WINLAB) [[BR]] 0min [[BR]] Approach: [[BR]] * Install yellow node, and use to support WiFi AP Uses: [[BR]] * MobilityFirst testing. === 4.8) Acquire and Add Android Handsets === 4:35pm [[BR]] Derek Meyer (Univ Wisconsin)[[BR]] 5min [[BR]] * Summary of discussions with Sprint about unlocked HTC Evo handset [[BR]] * 3-way NDA was signed [[BR]] * Sprint has subcontractor who handles such purchases: contact is ? [[BR]] * Many handsets in warehouse, such as HTC Evo 4G; approx $300 per handset[[BR]] * Must be unlocked by subcontractor, so can register with GENI network; need to provide config to subcontractor (done by Ivan)[[BR]] * Must be sure can download Android apps[[BR]] What are next steps? [[BR]] * Working with other projects, establish how many handsets are needed at which sites [[BR]] * Consider how to provide handsets to projects no longer supported by the GPO [[BR]] * Complete negotiation with Sprint subcontractor (WSA Distributing), and order devices (due 12/1/12) [[BR]] * Get and check samples? [[BR]] * Verify operation, and loading of apps [[BR]] * Deliver handsets to other projects (due 1/15/13) [[BR]] * Support use by other projects [[BR]] * Maintain relationship with WSA Distributing [[BR]] Current status: [[BR]] === 4.9) Add Vehicular Mobile Stations Based on Yellow Node === 4:40pm [[BR]] Giovanni Pau (UCLA) and Ivan Seskar (WINLAB) [[BR]] 0min [[BR]] Approach: [[BR]] * Install yellow node, and use to support WiMAX modems Uses: [[BR]] * Vehicular mobility tests === 4.10) Integrate and Introduce GIMI tools === 4:40pm [[BR]] Fraida Fund (NYU Poly) [[BR]] 5min [http://wimax.orbit-lab.org/wiki/WiMAX/GIMISetup GIMI Setup] [[BR]] [http://wimax.orbit-lab.org/wiki/WiMAX/GIMIUse GIMI Use] [[BR]] === 4.11) Add OMF/OML to WiMAX sites, and Make WiMAX Sites Accessible to Experimenters === 4:45pm [[BR]] Fraida Fund (NYU Poly), Manu Gosain (GPO), Derek Meyer (Wisconsin), [[BR]] 0min [[BR]] * Equip a WiMAX site with full OMF/OML capabilities, installing on VMs [[BR]] * Include Login Service for Remote Users [[BR]] * NYU Poly configuration: [[BR]] * 1) physical host acting as base station controller, runs the asn-gw and wimaxrf AM. [[BR]] * (1) and (2) run Ubuntu, (3) runs Windows. [[BR]] * It has Ethernet connections to the NEC IDU, NYU-Poly network (and Internet), and very soon GENI backbone (campus IS just informed me that they will be testing that tomorrow). [[BR]] * We have firewall rules set up so this host only accepts traffic from host (2) on the wimaxrf AM port. This allows us to make sure that only users with a current reservation can configure the BS. [[BR]] * 2) physical host running OMF 5.3 AM, EC, and some other services that are useful for the testbed. [[BR]] * (1) and (2) run Ubuntu, (3) runs Windows. [[BR]] * It has Ethernet connections to NYU-Poly network (internet) and OMF control network. [[BR]] * This is the host that testbed users log on to. We have firewall rules set up on this host so that only users with a current reservation can configure the BS or communicate with the testbed nodes. [[BR]] * 3) physical host that serves our group website and the reservation system for the testbed. It's connected to the NYU-Poly network (and Internet) [[BR]] * (1) and (2) run Ubuntu, (3) runs Windows. [[BR]] * Our testbed nodes are scattered throughout several CS labs and research areas (not part of our group). [[BR]] * They are connected to the pre-existing Ethernet jacks in the walls and floors of those rooms, which all go back to a CS server room, where we patch them through to our own (non-openflow) switch for the control network. [[BR]] * We do have an openflow switch that we plan to deploy somewhere at some point. [[BR]] * BBN experience (need summary) [[BR]] * [http://groups.geni.net/geni/attachment/wiki/GEC14Agenda/WiMAXDeploymentsAndExperiments/vmsetup_at_uwmadison.pdf Wisconsin configuration] [[BR]] * All services are running on the same physical machine. [[BR]] * HP server that came with the base station. [[BR]] * The base OS is Debian and virtual machines using for the services (Virtualbox) [[BR]] * Physical machine network connections: [[BR]] * Eth0 (128.105.22.xxx): University network (internet) [[BR]] * Eth1 (10.3.8.126): Network to IDU of base station [[BR]] * Eth2 (10.0.0.1): Control network for omf [[BR]] * Eth3: Connected to openflow (physically, but not enabled until we can get a vlan tag to GENI backbone) [[BR]] * Base operating system: Debian [[BR]] * Virtualbox guests: [[BR]] * 1. Ubuntu 9.04 -> aggmgr 5.2 -> wimaxrf service [[BR]] * Eth0 (128.105.22.xxx): bridged interface to university network [[BR]] * Eth1(10.3.8.254): bridged interface to base station network [[BR]] * 2. Ubuntu 10.04 -> aggmgr 5.3 -> cmcStub, Frisbee, inventory, pxe, result, saveimage [[BR]] * Also expctl, resctl, and xmpp on same machine [[BR]] * Eth0 (128.105.22.xxx): bridged interface to university network [[BR]] * Eth1 (10.0.0.200): bridged interface to control network [[BR]] * Coming: plan to federate with ProtoGENI cluster [[BR]] * Reference: [http://www.tridentcom.org/2012/program TridentCom 2012] : "Federating wired and wireless test facilities through Emulab and OMF: the iLab.t use case", Stefan Bouckaert (IBBT - Ghent University) [[BR]] * BBN is exploring how to utilize this to better integrate WiMAX sites into GENI, and be able to utilize the GENI AM API to assgin resources. [[BR]] Current status: * [http://wimax.orbit-lab.org/wiki/WiMAX/00/01#a1.3.6GENIWiMAXSiteExperimenterLoginInterfaces Current Operational Site Experimenter Login Interfaces] [[BR]] === 4.12) Connect WiMAX Sites to Persistent I2 Backbone Network, with IP Routing, to Support Multi-site Experiments === 4:45pm [[BR]] Manu Gosain (GPO), Fraida Fund (NYU Poly), Ivan Seskar (WINLAB) [[BR]] 0min [[BR]] * Connect a WiMAX site to the GENI I2 backbone network [[BR]] * Update WiMAX RF Agg Mgr to map MS groups into VLAN tags [[BR]] * Add switch [[BR]] * Connect switch to I2 backbone [[BR]] * VLAN connections from each site to "L2 router" at WINLAB [[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC14Agenda/WiMAXDeploymentsAndExperiments/WiMAXSiteConnectivity%20%200710wimaxmeeting14gec.ppt slide] [[BR]] * When can other WiMAX sites can be added? [[BR]] * UCLA; has physical connection; needs to configure; when? [[BR]] * Wisconsin; when? [[BR]] * Clemson; when? [[BR]] * UMass Amherst; has physical connection; needs to configure; when? [[BR]] * How is core network configured to support multi-site experiments? [[BR]] * How is new Data-path GW Srvc use at site to interface with core network? [[BR]] What are next steps? (Manu Gosain) [[BR]] * Establish planned configuration (due 11/15/12) [[BR]] * Establish plan with schedule to connect all sites (due 11/15/12) [[BR]] * Track connection of sites, and assist them as needed [[BR]] Current status: * [http://wimax.orbit-lab.org/wiki/WiMAX/00/01#a1.3.7GENIWiMAXSiteBackboneConnections Current Operational Site Backbone Connections] [[BR]] == 5) Status of GENI WiMAX site deployments == 4:45pm [[BR]] Manu Gosain (GPO) and members of site teams [[BR]] 15min [[BR]] [http://groups.geni.net/geni/wiki/WiMAXSiteDeployments Current status of GENI WiMAX site deployments] [[BR]] == 6) GENI WiMAX Experiments, Demos and Tutorials == === 6.1) Lab Experiments to Teach Wireless Basics === 5:00pm [[BR]] Thanasis Korakis (NYU Poly) [[BR]] 0min [[BR]] Funded project (1/13 - 12/13) to define lab experiments for students to teach wireless basics [[BR]] To be executed on GENI wireless sites, using both WiMAX and WiFi [[BR]] Overview and status [http://groups.geni.net/geni/attachment/wiki/GEC15Agenda/WiMAXUpdate/NYUPolyWirelessLab.pptx slides] [[BR]] What are next steps? [[BR]] * Early versions of lab experiments to be provided by GEC16 [[BR]] Current status? [[BR]] === 6.2) Multiple Site Experiment: Mobility First === 5:00pm [[BR]] Kiran Nagaraja (WINLAB) [[BR]] 0min [[BR]] GEC14 presentation: [[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC12WiMaxDeploymentAndExperimentation/MF-GEC12-PlenaryDemo-10-3-2011.pdf slides] [[BR]] Overview of current Mobility First multiple-site experiment. [[BR]] What additions are needed? [[BR]] 1) Add WiFi AP to each site. [[BR]] 2) L2 path from MS to core [[BR]] Experiment done without human intervention, by using x2 MAC addresses, and emulating packet loss to fake mobility. [[BR]] Consider these as possible sites by GEC13: WINLAB; BBN; NYU Poly; UCLA; Colorado. [[BR]] Current plans? [[BR]] === 6.3) WiMAX Tutorials at GEC16 === 5:00pm Organized by Fraida Fund (NYU Poly) [[BR]] 0min [[BR]] [http://groups.geni.net/geni/wiki/GEC16Agenda/WiMAX-Tutorial WiMAX Tutorials at GEC16] [[BR]] === 6.4) Wireless Demos at GEC16 === 5:00pm 0min ===== Vertical Handoff Using OpenFlow ===== This demonstration will show how OpenFlow, Open vSwitch, and the Floodlight controller can be used as a vertical handoff solution between different network interfaces. Traffic will be generated from a server application, and with the handoff solution, will be sent using various networking interfaces to a client. The client will receive the traffic from the server. The interfaces used on the server will be alternated to show the handoff process. Participants: * Ryan Izard, rizard@clemson.edu ===== Network Coding on ProtoGENI for Vehicular Networks ===== Network coding using ProtoGENI testbed will be demonstrated. By implementing network coding and multipath forwarding capabilities in the core network, this demo is designed for supporting efficient broadband data delivery in infrastructure-based vehicular networks at Clemson. Participants: * Ke Xu, kxu@clemson.edu ===== Supporting !MobilityFirst in OpenFlow Based SDNs ===== !MobilityFirst (clean slate FIA project) has some unique features such as a globally unique naming scheme (GUID), storage aware routing etc. In this demo, we use GENI resources to show that such experimental non IP features can be enabled using OpenFlow based SDNs, by writing appropriate control programs that handle them. Participants: * Aravind Krishnamoorthy, aravind.k90@rutgers.edu ===== WiMAX Prototyping in Metro Detroit ===== Our initial coverage measurement and the tools we have developed to facilitate the road tests will be presented. We will also show the OpenXC platform and its integration with GENI, which may well benefit Wireless Vehicular Networking by offering you more insights into your car's operation. Participants: * Yu Chen, yuchen.wayne@gmail.com ===== Mobility Services Engine ===== A Demonstration of the Mobility Services Engine (MSE). This will be a live demonstration of the MSE using a laptop client. We will highlight some of the measurement capabilities of the system. Participants: * Derek Meyer, dmeyer@cs.wisc.edu ===== !MobilityFirst Network API use in Mobile Applications ===== One of the key feature of the proposed !MobilityFirst protocol stack is the service flexibility, with particular emphasis on multicasting and anycasting. In the demo we will show how this network service features could be easily exploited to enhance the capabilities of mobile applications through the use of the network API. Participants: * Ivan Seskar, seskar@winlab.rutgers.edu ===== WiMAX at NYU-Poly ===== Demonstration of wireless lab exercises utilizing GENI WiMAX resources. Participants: * ffund01@students.poly.edu ===== WiMAX DDoS Reverse Engineering ===== Our WiMAX research involves analyzing the cross-layer affects of the system parameters used for the Bandwidth Contention Process. We are specifically looking at how these parameters affect a subscriber station's (SS) throughput, packet loss rates, and vulnerability to Distributed Denial of Service (DDoS) attacks. Software simulations use the NS-2 simulator and hardware simulations are being conducted on ORBIT. The parameters investigated are request retires, backoff start, backoff end and frame duration. Participants: * Katherine Cameron, kccamer@clemson.edu == 7) Adjourn == 5:00pm [[BR]] == WiMAX BoF Dinner == Please join us for a [http://groups.geni.net/geni/wiki/GEC16Agenda/BoF_WiMAX WiMAX BoF dinner] on Wednesday evening. Please indicate on this poll, if you will be attending. [[BR]] == References == === R1) Airspan Profile-C Base Station, with Associated Hardware and Software === Ivan Seskar (WINLAB) and Harry Mussman (GPO) [[BR]] a) Choice of Airspan to provide a WiMAX base station for new GENI WiMAX sites [[BR]] NEC is not able to provide a WiMAX base station for new GENI WiMAX sites [[BR]] WINLAB and the GPO have decided to purchase base stations from Airspan, a commercial company pursuing target customers such as universities and small carriers. [[BR]] For example, the Univ of Colorado at Boulder IT Dept has installed an Airspan system with 4 sectors, that covers the campus. They have been pleased with Airspan. [[BR]] WINLAB has a frim quote from Airspan for their MacroMAXe profile-C WiMAX base station unit, and related items. [[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC12WiMaxDeploymentAndExperimentation/WiMAX_Brochure_Rev_J3.pdf Airspan brochure][[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC12WiMaxDeploymentAndExperimentation/MacroMAXe%20Product%20Specification%20_Rel%209%200%201_%20Vx%5B1%5D.pdf MacroMAXe Product Specification] [[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC12WiMaxDeploymentAndExperimentation/UoC%20-%20MacroMAXe%20RF%20Plan%20V1.1.pptx Airspan Deployment Plan for Univ Colorado at Boulder][[BR]] b) Rutgers will provide a kit including: [[BR]] Airspan MacroMAXe profile-C WiMAX base station unit, for outside mounting[[BR]] Choice of frequency: [[BR]] (2510 Lo: 2496MHz to 2570MHz) [[BR]] (2510 Mid: 2560MHz to 2630MHz) [[BR]] (2510 Hi: 2620MHz to 2690MHz) [[BR]] (3650: 3650MHz to 3700MHz)] [[BR]] NOTE: WINLAB needs to know frequency choices during November (or early December), so that they can place an order with Airspan for delivery late 2011 or early 2012! Sector antenna, with x4 RF jumper cables [[BR]] 2x4 MIMO, supported by base station and antenna [[BR]] GPS antenna, with surge suppressor and cable [[BR]] DC power cable, from base station unit (outside) to testbed (inside) [[BR]] Network management software license, 1 per base station [[BR]] c) Campus will need to provide: [[BR]] Pole for mounting [[BR]] DC power supply (-48v, approx 300W) [[BR]] Ethernet cable, from base station unit (outside) to testbed (inside); consider copper (may be a problem with lightning surge) or fiber (requires MM fiber cable, and fiber interface on switch) [[BR]] Windows server to host network management software [[BR]] Linux server to host OMF software [[BR]] Ethernet switches, and other network equipment, for access (configuration to be provided) [[BR]] d) Additional kits can be purchased from Airspan [[BR]] Price is approximately $15,000. [[BR]] e) It is expected that additional base stations kits will be purchased for some (or all) Sol 3 GENI sites in Spiral 5. [[BR]] Thus, campus site might be able to add additional sectors, at no cost. [[BR]] Planning for next year will be done later this year. [[BR]] Consider including additional sectors within your technical plan right away. [[BR]] f) Note: Airspan indicates that they expect to introduce a new base station unit within the next year. [[BR]] Somewhat reduced performance/range. [[BR]] Approximately half the cost [[BR]] g) Airspan indicates that their sector antenna provides:[[BR]] A 90degree pattern, which is consistent with proper coverage over a 120degree sector.[[BR]] Four internal elements, to support 2x4 MIMO.[[BR]] Airspan can provide provide x4 omni-directional antennas, but the cost is much higher, and the range is signifcantly reduced.[[BR]] h) Airspan shows that their profile-C base station unit can be configured to operate without an ASN GW and without a RADIUS (authentication) server.[[BR]] In this mode, a list of allowed base stations must be configured into the base station, and groups of these base stations are mapped to a VLAN on the ethernet port.[[BR]] This appears to be consistent with the current NEC base station unit operated with the ASN GW/WiMAX RF AggMgr code that has been provided by Rutgers/WINLAB[[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC12WiMaxDeploymentAndExperimentation/CS%20Network%20Configuration%20Setup%20Guide.pdf MacroMAXe Configuration Guide][[BR]] i) Airspan shows that if handover operation is desired, an ASN GW must be provided, plus typically an associated RADIUS (authentication) server.[[BR]] In this case, the base station unit operates with IP at the interface. [[BR]] j) Airspan installation instructions [http://wimax.orbit-lab.org/wiki/WiMAX/01b link] [[BR]] === R2) Netspan Network Management System for Airspan Base Station === Manu Gosain (GPO) [[BR]] * Suggest: add Netspan system at each site with Airspan base station [[BR]] * Requires: Windows server [[BR]] * Use: setup of Netspan base station to provide basic functions [[BR]] [http://groups.geni.net/geni/attachment/wiki/GEC14Agenda/WiMAXDeploymentsAndExperiments/NetspanMgmtSystem%20%200710wimaxmeeting14gec.ppt slides] [[BR]] [http://wimax.orbit-lab.org/wiki/WiMAX/01b#a3.4NetspanInstallationInstructions installation instructions] [[BR]] * Coming: replace with new WiMAX RF AggMgr [[BR]]