wiki:GEC16Agenda/OpenFlow/Instructions/Execute

Version 4 (modified by nriga@bbn.com, 11 years ago) (diff)

--

Configure and Initialize Services: Configure your OpenFlow switch

Although OVS is installed and initialized on the host that is meant to act as a software switch, it has not been configured yet. There are two main things that need to be configured : create your software switch with the interfaces as ports and point the switch to an OpenFlow controller.

In order to configure our switch, we first need to login to the host that will be used as an OpenFlow switch.

Login to OVS host

Login information for a VM
  1. Return to the Slice page. Press the Details button in the row of the slice table for Utah ProtoGENI.
  2. Open a new terminal window. Copy the command to the right of Login into that terminal window. You have now logged into your VM.
  3. Return to the Slice page and repeat the previous two steps for Utah InstaGENI in a second terminal window.

1. Create the Software Switch

Execute Experiment

Use a Learning Switch Controller

Run a port deflection Controller

Run a server deflection Controller