Version 8 (modified by 13 years ago) (diff) | ,
---|
- Experimenter Workflow
- Prework
- Useful Tips
- Overview of Alice's Experiment
- I. Getting Started
- II. Using Physical Topology to Influence Your Experiment
- III. Run a Layer 2 Experiment
- iV Using OpenFlow in mesoscale
- V. Cleanup resources
- VI. Get Your Own Account
- Creating PlanetLab Request RSpecs from Advertisement RSpecs
- Reserving ProtoGENI nodes with Flack
- AM URL Table
Experimenter Workflow
Prework
- Download and install VirtualBox on your
machine, we have tested versions 4.1.8
- If you run Ubuntu 10.04, it comes with VirtualBox 3.1.6_OSE, which will
not work, please download the latest version.
- UPDATE Download the VM image
- Run VirtualBox and Import Appliance (File->Import Ampliance), accept the
default settings for the VM.
- If you are using a FAT32 filesystem you will NOT be able to load the
image.
- Start the VM and log in
- Change the default password, click on the getversion task bar on the top,
on the right on the user 'geni', and choose the Change Password button.
- Verify that the VM has connectivity. Start Firefox (shortcut on the top
bar) and try to load Google. If you can't reach any website, restore VM's Network connection.
- On the far right on the top bar, there is the network icon (two opposite
facing arrows).
- Click that icon and choose 'Auto eth0'.
- Try loading the webpage again.
Useful Tips
- You can copy-paste between the host and the guest VM.
- In the terminal within the VM, use Ctrl-Shift-C to copy and
Ctrl-Shift-V to paste.
- vim and emacs editors are installed on the VM, so feel free to use them for
editing your files
To replace a pattern within the file:
- If you are using vim, while in command mode, type:
%s/pattern/replace_text/gc
And press 'y' for the instances of the pattern you want replaced, 'n'
otherwise.
- If you are using emacs, press Alt-x and then type:
query-replace
and press ENTER. Enter the pattern to be replaced, press ENTER, enter the
text you want to replace it with and press ENTER. Press 'y' for the instances of the pattern you want replaced, 'n' otherwise.
- If you want to have a shared folder between your machine and the VM so that
it's easier to transfer files during the tutorial, you have to do this before starting the VM. Follow [http://ozz314.wordpress.com/2008/05/08/virtualbox-shared-folders-between-ubuntu-guest-and-mac-host/ these instructions]
- If you get an error running Omni, look at the
troubleshoot page for help.
Overview of Alice's Experiment
Alice and Bob, two GENI experimenters, have volunteered to help us write these instructions. They are going to reserve separate hosts but they will be sharing the network infrastructure.
Alice's information for the tutorial is :
<USERNAME> | alice | The user name for the tutorial's GPO ProtoGENI |
ProtoGENI host | pg46.emulab.net (@clemson) | Node controlled by Utah's |
<PCNAME> | pg46 | For PG rspec |
MyPLC host | of-planet1.stanford.edu | Node controlled by Stanford's |
Backup MyPLC host | navis.gpolab.bbn.com | Node controlled by GPO's |
MyPLC AM, if you run into problems with the first MyPLC host, you can try again
<SUBNET> | 10.42.122.0/24 | The subnet to use for Layer3 ping |
<SUBNET-OCT> | 122 | For the OF rspec |
<ETH-TYPE> | 10122 | The ethernet type for Layer2 ping, for the OF |
<PORT> | 10122 | The port that the OpenFlow controller is listening on |
And after Alice and Bob completed the tutorial, Alice's scratchpad is :
SCRATCHPAD | Complete this info | |
My MyPLC host IP(144) | 10.42.144. 90 | IP address of your |
MyPLC login name | pgenigpolabbbncom_aliceslice | Your login name |
Neighbor's MyPLC host IP(144) | 10.42.144. 52 | IP address of |
My MyPLC host IP(your subnet) | 10.42 . 122 . 90 | The IP |
Neighbor's MyPLC host IP(your subnet) | 10.42 . 122 . 52 | |
I. Getting Started
1. Firewalls
Some of the compute resources are behind a firewall. To avoid any firewall problems, please first login to "ops.pgeni.gpolab.bbn.com", since we might need to tunnel some traffic through this connections.
To do that :
- Open a terminal window (there is a shortcut on the top bar).
- Change to the directory of your team . Substitute ## with the number of your team.
cd Tutorials/ExptWorkflow/gpousr##
- Connect to ops.pgeni.gpolab.bbn.com
xterm -e ssh -i ssh/geni_key -F ssh/config gpousr##@ops &
1. Configure Omni
The purpose of this first exercise is to setup Omni to use your credentials and keys.
1a. Setup omni
Omni uses as input a configuration file, where you can specify information such as which clearinghouse to use, where your certificate and keys are located, etc. Under the Tutorials/Omni/<username> directory (where <username> is your username on the piece of paper you were given upon entering the room), there is a configuration file, omni_config.
- Open a terminal (there is a shortcut on the top bar).
- First lets update the files that are on the VM:
cd Tutorials/Omni/ downloadRSpecs.sh
- The rest of the tutorial assumes that you are under the
Tutorials/Omni/<username> directory :
cd <username>
- Remove the passphrase from your certificate. For security best
practices you should keep a passphrase on your certificate. To avoid typing the passphrase throughout the tutorial, we will temporarily remove the passphrase. Run
clear_cert.sh <username>
It will prompt you for the passphrase which should be included on the slip
that was given to you.
- Verify that you have the necessary credential and key files
ls ssh |grep <username>
For gpousr21 the output looks like :geni@geni-vm:~/omni_tutorial$ ls ssh | grep gpousr21 gpousr21_cert_ct.pem gpousr21_cert.pem gpousr21_key gpousr21_key.pub
gpousr21_cert_ct.pem Cleartext certificate for gpousr21, i.e. does not
gpousr21_cert.pem Encrypted certificate for gpousr21 gpousr21_key The private key that gpousr21 would use to login to the
gpousr21_key.pub The corresponding public key that gpousr21 will ask to
- Look at the omni_config. Open omni_config. For the tutorial you
should use the cleartext certificate, but when running your own experiments, for security best practices always use your encrypted certificate.
For gpousr21 using a cleartext certificate the omni_config file looks
like :
# This file is the omni_config for GEC 12 tutorial # Experimental topologies on the GENI Mesoscale network with Omni # General section of omni config [omni] default_cf = pgeni users = gpousr21 # ---------- Users ---------- [gpousr21] # Make sure the urn matches the URN of the credential urn = urn:publicid:IDN+pgeni.gpolab.bbn.com+user+gpousr21 # Public key to be installed in compute resources. For multiple # keys use a comma separated file keys = ~/Tutorials/Omni/gpousr20/ssh/gpousr21_key.pub # If -a option is not specified the omni command will by run against all # the following AMs aggregates = http://emulab.net/protogeni/xmlrpc/am, https://pgeni.gpolab.bbn.com/protogeni/xmlrpc/am, http://myplc.gpolab.bbn.com:12346/, http://myplc.clemson.edu:12346/, https://myplc.stanford.edu:12346/, https://wings-openflow-1.wail.wisc.edu:12346/, https://of.cs.washington.edu:12346/, https://plc.orbit-lab.org:12346/, https://myplc.grnoc.iu.edu:12346/, https://myplc.cip.gatech.edu:12346/, https://foam-tutorial.gpolab.bbn.com:3626/foam/gapi/1 # ---------- Frameworks ---------- [pgeni] type = pg ch = https://www.emulab.net:443/protogeni/xmlrpc/ch sa = https://www.pgeni.gpolab.bbn.com:443/protogeni/xmlrpc/sa # Use the following two lines if you are using # a certificate with a passphrase #cert = ~/Tutorials/Omni/gpousr21/ssh/gpousr21_cert.pem #key = ~/Tutorials/Omni/gpousr21/ssh/gpousr21_cert.pem # Use the following two lines if you are using # a cleartext cert. cert = ~/Tutorials/Omni/gpousr21/ssh/gpousr21_cert_ct.pem key = ~/Tutorials/Omni/gpousr21/ssh/gpousr21_cert_ct.pem #------AM nicknames---------------- # Instead of typing the whole url of an AM in the -a option you can # specify a nickname in this section and use the nickname instead # Format : # Nickname=URN, URL # URN is optional [aggregate_nicknames] # ProtoGENI AMs and PlanetLab central pg-gpo=urn:publicid:IDN+pgeni.gpolab.bbn.com+authority+am,https://pgeni.gpolab.bbn.com/protogeni/xmlrpc/am pg-utah=,https://www.emulab.net/protogeni/xmlrpc/am pg-ky=urn:publicid:IDN+uky.emulab.net+authority+am,https://www.uky.emulab.net/protogeni/xmlrpc/am plc=,https://www.planet-lab.org:12346 # Private myplc installations pl-gpo=,http://myplc.gpolab.bbn.com:12346/ pl-clemson=,http://myplc.clemson.edu:12346/ pl-stanford=,https://myplc.stanford.edu:12346/ pl-wisconsin=,https://wings-openflow-1.wail.wisc.edu:12346/ pl-washington=,https://of.cs.washington.edu:12346/ pl-rutgers=,https://plc.orbit-lab.org:12346/ pl-indiana=,https://localhost:1234/ pl-gatech=,https://localhost:2346/ # Tutorial OpenFlow AM of-tut=,https://foam-tutorial.gpolab.bbn.com:3626/foam/gapi/1 # Other OpenFlow AMs of-gpo=,https://foam.gpolab.bbn.com:3626/foam/gapi/1
Note, the pgeni framework definition includes the Utah Emulab clearinghouse,
which is the only clearinghouse for ProtoGENI aggregates. For additional
configuration details please see the [http://trac.gpolab.bbn.com/gcf/wiki/Omni
Omni] page for more details. The omni_configuration parameters shown define the
following:
Parameter Use default_cf Default Clearinghouse and credentials used if not specified
users users setting used when reserving slices. urn The username URN keys A comma separated list of public ssh key files to be uploaded to
type Clearinghouse/credentials type "pg" indicates ProtoGENI, see the
ch ProtoGENI Clearinghouse URL. sa Slice Authority URL. cert Location of your SSL encrypted certificate (contains both a
key Location of your SSL encrypted key (contains both a certificate and
<AM nickname> Optional URN, required URL of an Aggregate Manager.
- Verify that the user URN is correct.
Get the URN from your omni config
grep urn omni_config
Verify that it matches the urn in your cert (disregard the leading URI:)openssl x509 -noout -text -in ./ssh/<username>_cert_ct.pem | grep 'urn:publicid'
For gpousr21 the output looks likegeni@geni-vm:~/omni_tutorial$ grep urn omni_config urn = urn:publicid:IDN+pgeni.gpolab.bbn.com+user+gpousr21 geni@geni-vm:~/omni_tutorial$ openssl x509 -noout -text -in ./ssh/gpousr21_cert_ct.pem | grep 'urn:publicid' URI:urn:publicid:IDN+pgeni.gpolab.bbn.com+user+gpousr21, email:gpousr21@pgeni.gpolab.bbn.com
1b. Test configuration
In order to test that our configuration is correct, you can issue a getversion command. For this step we have used PlanetLab's AM, but you can use any Aggregate Manager(AM).
omni.py getversion -a http://www.planet-lab.org:12346
Or equivalently using the PlanetLab nickname:
omni.py getversion -a plc
gpousr21 decided to use PlanetLab central :
geni@geni-tutorial:~/Tutorials/Omni/gpousr21$ omni.py getversion -a plc INFO:omni:Loading config file omni_config INFO:omni:Using control framework pgeni INFO:omni:Substituting AM nickname plc with URL https://www.planet-lab.org:12346, URN unspecified_AM_URN INFO:omni:AM URN: unspecified_AM_URN (url: https://www.planet-lab.org:12346) has version: INFO:omni:{ 'ad_rspec_versions': [ { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/gre-tunnel/1', 'http://www.protogeni.net/resources/rspec/ext/other-ext/3'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/ad.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [], 'namespace': None, 'schema': None, 'type': 'SFA', 'version': '1'}], 'code_tag': '1.0-35', 'code_url': 'git://git.onelab.eu/sfa.git@sfa-1.0-35', 'default_ad_rspec': { 'extensions': [], 'namespace': None, 'schema': None, 'type': 'SFA', 'version': '1'}, 'geni_api': 1, 'hostname': 'www.planet-lab.org', 'hrn': 'plc', 'interface': 'aggregate', 'request_rspec_versions': [ { 'extensions': [ 'http://www.protogeni.net/resources/rspec/ext/gre-tunnel/1', 'http://www.protogeni.net/resources/rspec/ext/other-ext/3'], 'namespace': 'http://www.protogeni.net/resources/rspec/2', 'schema': 'http://www.protogeni.net/resources/rspec/2/request.xsd', 'type': 'ProtoGENI', 'version': '2'}, { 'extensions': [], 'namespace': None, 'schema': None, 'type': 'SFA', 'version': '1'}], 'sfa': 1, 'testbed': 'myplc'} INFO:omni: ------------------------------------------------------------ INFO:omni: Completed getversion: Options as run: aggregate: plc framework: pgeni native: True Args: getversion Result Summary: Got version for 1 out of 1 aggregates INFO:omni: ============================================================
2. Make a slice
Before we continue with the rest of the tutorial, we need to create a slice that will contain all our slivers with the different AMs. Since the omni_config specifies using GPO's ProtoGENI as the Slice Authority (SA), your slice will be created in the pgeni.gpolab.bbn.com namespace.
2a. Createslice
For this tutorial we will create a slice named gposlice## (where ## matches your username); you should always choose a slice name that is meaningful to you. To avoid confusion, avoid creating a slice with the same name as your username (i.e. if your username is alice, don't name your slice alice too).
omni.py createslice gposlice##
2b. Renew Slice
Note in the above output that our new slice expires soon. Your slivers can not last longer then your slice, and your resources will go away when the reservation expires. For your experiments be sure to renew your slice for the duration of your experiment. For the tutorial you don't need to extend the lifetime, but if you wanted to, this is what it would look like:
omni.py renewslice gposlice## 20111105T00:00:00
For Alice the output would like:
geni@geni-tutorial:~/Tutorials/Omni/gpousr21$ omni.py renewslice gposlice21 20111105T00:00:00 INFO:omni:Loading config file omni_config INFO:omni:Using control framework pgeni INFO:omni.protogeni:Requesting new slice expiration '2011-11-05T00:00:00' INFO:omni:Slice gposlice21 now expires at 2011-11-05 00:00:00 UTC INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+gposlice21 expires on 2011-11-05 00:00:00 UTC INFO:omni: ------------------------------------------------------------ INFO:omni: Completed renewslice: Options as run: framework: pgeni native: True Args: renewslice gposlice21 20111105T00:00:00 Result Summary: Slice gposlice21 now expires at 2011-11-05 00:00:00 UTC Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+gposlice21 expires on 2011-11-05 00:00:00 UTC INFO:omni: ============================================================
Note: You can not renew the slice expiration time to an earlier time that its current expiration time. Also there is no deleteslice operation. However, you can delete all the slivers in your slice and let the slice expire.
2c. List your Slices
If you want to find out what slices you currently have, you can use an Omni
command to listmyslices
.
omni.py listmyslices <username>
We've pre-reserved resources in a second slice (ctrl##) in advance of the tutorial for each user.
So for gpousr21 the output would look like :
geni@geni-tutorial:~/Tutorials/Omni/gpousr21$ omni.py listmyslices gpousr21 INFO:omni:Loading config file omni_config INFO:omni:Using control framework pgeni INFO:omni:User 'gpousr21' has slices: urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+gposlice21 urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+ctrl21 INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listmyslices: Options as run: framework: pgeni native: True Args: listmyslices gpousr21 Result Summary: Found 2 slices for user 'gpousr21'. INFO:omni: ============================================================
3. Make a ProtoGENI sliver
The first resource we are going to add to our slice is a ProtoGENI host.
3a. Createsliver
Under the Tutorials/Omni/<username> directory, there is a directory called rspecs that has all the necessary RSpecs for the tutorial. For this tutorial we are going to use ProtoGENI hosts from GPO's ProtoGENI, as well as Wide Area ProtoGENI hosts from Utah's ProtoGENI cluster.
- If your ProtoGENI host is in the emulab.net(e.g. pg30.emulab.net),
namespace then it belongs to Utah's cluster and you should use Utah's AM (nickname: pg-utah), and use rspecs/final/protogeni_utah_<username>.rspec
- If your ProtoGENI host is in the pgeni.gpolab.bbn.com(e.g.
pc1.pgeni.gpolab.bbn.com), namespace then it belongs to GPO's cluster and you should use GPO's AM (nickname: pg-gpo), and use rspecs/final/protogeni_gpo_<username>_v02.rspec
- Advanced Option: If you are interested in creating your own RSpecs
follow the instructions under [#ReservingProtoGENInodeswithFlack Reserving ProtoGENI nodes with Flack]. Then skip to the Next Step.
gpousr21 was assigned host pc1.pgeni.gpolab.bbn.com so she should use
pg_gpo.rspec:
<!-- This rspec will reserve one wide-area ProtoGENI host AM: http://www.emulab.net/protogeni/xmlrpc/am --> <!-- This file is an rspec for GEC 12 tutorial --> <rspec type="request" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://www.protogeni.net/resources/rspec/2"> <node client_id="pc1" component_manager_id="urn:publicid:IDN+pgeni.gpolab.bbn.com+authority+cm" component_id="urn:publicid:IDN+pgeni.gpolab.bbn.com+node+pc1" component_name="pc1" exclusive="true"> <sliver_type name="raw-pc"> <disk_image name="urn:publicid:IDN+pgeni.gpolab.bbn.com+image+emulab-ops//UBUNTU1004-STD"/> </sliver_type> <services> <execute command="cd /home/gpousr21/config_dir;./install.sh" shell="sh " /> <install install_path="/home/gpousr21" url="http://192.1.249.166:8383/gec12tutorial_ubuntu.tar.gz" file_type="tar.gz"/> </services> </node> </rspec>
- Now you are ready to reserve your host on the appropriate AM. For
easy access and to be able to copy and paste AM URLs that are used in this tutorial, we made a table. If your node is pg46.emulab.net, you are sharing your node with Alice. Alice has already created the sliver for you, so you can run the 'createsliver' command, and its ok if it fails.
omni.py createsliver -a <AM_NICKNAME> gposlice## rspecs/final/<rspec_file>
The output should look like :
geni@geni-vm:~/omni_tutorial$ omni.py createsliver -a http://www.emulab.net/protogeni/xmlrpc/am aliceslice rspecs/pg_utah.rspec FILL IN HERE
3b. Sliverstatus
We asked for an exclusive ProtoGENI host, which means that the node needs to be loaded with the right OS and booted, before our sliver is ready to use. This will take a while. We can check the status of our sliver, using the sliverstatus call.
omni.py sliverstatus -a <AM_NICKNAME> gposlice##
The status will probably be 'not ready', you can continue with the next steps of the tutorial, and we will come back to this node later.
II. Using Physical Topology to Influence Your Experiment
In this exercise we are going to test and see how the underlying network topology can affect the topology of your experiment. For this exercise we have already setup the networking portion of the exercise, so you just need to reserve your compute resources.
1. Make a MyPLC sliver
For this exercise you would need to reserve two MyPlc hosts, each in a different AM. Under the rspecs directory (Tutorials/ExptWorkflow/gpousr##/rspecs/) there are the two MyPLC rspecs that you should use.
- The name of the rspec is of the form myplc-<site>-<node>.rspec. You should take a look in this table to find out what is the
nickname for the AM, and try to reserve the sliver. Also open your omni_config file and check how the nicknames are defined.
- Advanced Option: If you are interested in creating your own RSpecs
follow the instructions under Creating PL Request RSpecs from Ad. RSpecs. Then skip to the [#a2.Logintothenodes---OmniScripting Next Step].
gpousr21 was assigned hosts bain.gpolab.bbn.com
<?xml version="1.0" ?> <!-- Resources at AM: URN: http://myplc.gpolab.bbn.com:12346/ --> <rspec type="request" xmlns="http://www.protogeni.net/resources/rspec/2" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd"> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+bain.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="bain.gpolab.bbn.com" exclusive="false" client_id="ganel"> <sliver_type name="plab-vnode"/> </node> </rspec>
- Now you are ready to reserve your host on the appropriate AM. For easy access and to be able to copy and paste AM URLs and nicknames that are used in this tutorial, we made a table.
omni.py createsliver -a <AM_NICKNAME> gposlice## rspecs/<rspec_file>
The output should look like :
geni@geni-tutorial:~/Tutorials/ExptWorkflow/gpousr10$ omni.py createsliver sliceomni10 rspecs/final/myplc-gpolab-ganel.rspec -a pl-gpo INFO:omni:Loading config file omni_config INFO:omni:Using control framework pgeni INFO:omni:Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+sliceomni10 expires within 1 day on 2011-11-04 06:57:31 UTC INFO:omni:Substituting AM nickname pl-gpo with URL http://myplc.gpolab.bbn.com:12346/, URN unspecified_AM_URN INFO:omni:Substituting AM nickname pl-gpo with URL http://myplc.gpolab.bbn.com:12346/, URN unspecified_AM_URN INFO:omni:Creating sliver(s) from rspec file rspecs/final/myplc-gpolab-ganel.rspec for slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+sliceomni10 INFO:omni:Asked http://myplc.gpolab.bbn.com:12346/ to reserve resources. Result: INFO:omni:<?xml version="1.0" ?> INFO:omni:<!-- Reserved resources for: Slice: sliceomni10 At AM: URL: http://myplc.gpolab.bbn.com:12346/ --> INFO:omni:<rspec expires="2011-11-04T01:58:07Z" generated="2011-11-04T00:58:07Z" type="manifest" xmlns="http://www.protogeni.net/resources/rspec/2" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/manifest.xsd"> <node client_id="ganel.gpolab.bbn.com" component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+ganel.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="ganel.gpolab.bbn.com" exclusive="false" sliver_id="urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+sliceomni10:291:4:0"> <hardware_type name="plab-pc"/> <hardware_type name="pc"/> <location country="us" latitude="42.3897" longitude="-71.1475"/> <sliver_type name="plab-vnode"/> </node> </rspec> INFO:omni: ------------------------------------------------------------ INFO:omni: Completed createsliver: Options as run: aggregate: pl-gpo framework: pgeni native: True Args: createsliver sliceomni10 rspecs/final/myplc-gpolab-ganel.rspec Result Summary: Slice urn:publicid:IDN+pgeni.gpolab.bbn.com+slice+sliceomni10 expires within 1 day(s) on 2011-11-04 06:57:31 UTC Reserved resources on http://myplc.gpolab.bbn.com:12346/. INFO:omni: ============================================================
Follow the same procedure to reserve your second myPLC host.
2. Login to the nodes --- Omni Scripting
After reserving the nodes, you are ready to login. When reserving PlanetLab resources, using a different clearinghouse, the login name that should be used to access the nodes is 'not' the username. The username is listed as part of the sliverstatus call. For common functionality like this that is expected to be used often, omni gives you the capability of writing scripts and including omni as a library. Under omni_tutorial there is a folder 'example_scripts' that includes example python scripts that use Omni. One script that is available is the getMyLogin.py script that will return the exact command for logging-in to your nodes.
readyToLogin -a <AM_NICKNAME> sliceomni##
The script will return the actual command that you would need to use for logging in.
For gpousr21 the script would return :
================================================================================ Aggregate [https://myplc.stanford.edu:12346] has a PlanetLab sliver. of-planet1.stanford.edu's pl_boot_state is: boot Login using: xterm -e ssh -i ./ssh/geni_key pgenigpolabbbncom_gposlice21@bain.gpolab.bbn.com & ================================================================================
Note: If your hosts are in Georgia Tech you would need to use the connection through ops. To do that run
xterm -e ssh -i ssh/geni_key -F ssh/config pgenigpolabbbncom_gposlice##@<hostname> &
For gpousr21 that would be :
xterm -e ssh -i ssh/geni_key -F ssh/config pgenigpolabbbncom_gposlice21@bain &
3. Test Different Topologies
The Mesoscaly deployment can offer, different topologies even if the communication is between the same hosts. We have provisioned two different subnets in the Mesoscale infrastructure, each using a different VLAN (one using 3715 and the other 3716).
The two subnets that have been provisioned are 10.42.144.0/24 on 3715 and 10.42.149.0/24 on 3716.
First of all let's see how we can figure out the IP of the hosts we reserved :
- List all the interfaces in your host. You will see that there are many
interfaces of the form eth1.XXXX
/sbin/ifconfig
Part of the output would look like :
eth1.1750:42147 Link encap:Ethernet HWaddr 00:B0:D0:E1:6F:78 inet addr:10.42.147.90 Bcast:10.42.147.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth1.1750:42148 Link encap:Ethernet HWaddr 00:B0:D0:E1:6F:78 inet addr:10.42.148.90 Bcast:10.42.148.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
- Figure out the last octet of the IP address of your hosts. The way these
MyPLC hosts are setup, is that they have multiple subinterfaces, each configured to be part of a different IP subnet. Almost all subnets in the hosts are in the form of 10.42.Y.0/24. You will notice that for all these subnets, your host has the same last octet. In the example above all the subinterfaces of eth1, will have an IP address that will end in 90 (10.42.147.90, 10.42.148.90)
- Ping over 3715. After loging in to your hosts ping from host1 to host2.
Assuming that host2 has a last octet of YYY you should:
ping 10.42.144.YYY
Notice the RTT on the packets.
- Ping over 3716. After loging in to your hosts ping from one host2 to host1.
Assuming that host1 has XXX as it's last octet you should ping
ping 10.42.149.XXX
Notice the RTT on the packets and compare it with the above ping.
III. Run a Layer 2 Experiment
The mesoscale GENI resources are connected on Layer 2, which enables Layer 2, i.e. non-IP experiments. In this exercise we are going to run a layer 2 ping program, where we are going to send raw Ethernet frames of a custom Ethernet type to a server and receive a reply. Currently MyPLC only supports IP experiments, so we will use our ProtoGENI host which we have reserved in the beginning.
- check that your sliver is ready
omni.py sliverstatus -a <AM_NICKNAME> <SLICE_NAME>
If you haven't reserved your own node, then try logging in with your credentials anyway, if you fail please let us know.
- If your sliver is ready, login to the node (if your host is pg33, pg32 please read the notes):
ssh -i ./ssh/geni_key <username>@<host>
For Alice, that has reserved node pg46.emulab.net:
ssh -i ./ssh/geni_key alice@pg46.emulab.net
NOTE 1: If your node is pg32.emulab.net or pg33.emulab.net, you will need to do some extra work to login to the node. The control interface of these nodes is behind a firewall so you will login to your node through 'ops.pgeni.gpolab.bbn.com'. Run
xterm -e ssh -i ./ssh/geni_key gpousr##@<hostname> &
- Check to see that the software has been downloaded :
[alice@protogeni1 ~]$ pingPlus
- Test that the node has been configured correctly. The data interfaces in the ProtoGENI nodes are not configured. The install script that was run when you reserved the node should have configured it for you.
[alice@protogeni1 ~]$ /sbin/ifconfig
This should list only three interface, the loopback and the control interface and an interface with a name similar to eth#.#### Verify that the data interface is up :[alice@protogeni1 ~]$ /sbin/ifconfig
and note the name of the data interface, the data interface is the one that has an IP address in the 10.42.149.0/24 subnet:eth1.1750 Link encap:Ethernet HWaddr 00:1F:29:32:92:4D inet addr:10.42.149.146 Bcast:10.42.149.255 Mask:255.255.255.0 inet6 addr: fe80::21f:29ff:fe32:924d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118 errors:0 dropped:0 overruns:0 frame:0 TX packets:115 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5428 (5.3 KiB) TX bytes:3482 (3.4 KiB)
In this case the name is 'eth1.1750'.
- Run the Layer 2 Ping We have pre-configured the network to forward along Layer2 packets of Ethernet type listed in your account sheet, so let's try pinging with that. The software that is going to send Layer 2 pings, is called pingPlus.
There is a server running at a host with mac address
00:0c:29:7b:c5:b3
. Run the client :sudo /usr/local/bin/pingPlus 00:0c:29:7b:c5:b3 <interface_name> <EthType>For Alice the output would be :
[alice@protogeni1 ~/pingPlus]$ sudo ./pingPlus 00:0c:29:7b:c5:b3 eth1.1750 10136 RQ:'5019+6242' to 00:0c:29:7b:c5:b3. RL:5019+6242=11261 from 00:0c:29:7b:c5:b3.Send a stream of packets, by specifying the number of packets as the last parameter :
sudo ./pingPlus 00:0c:29:7b:c5:b3 <interface_name> <EthType> 10Note:If the program is stuck waiting for a reply for more than 1 minute, press Ctrl-C to exit and try again.
Congratulations you ran a Layer two experiment across the country!
iV Using OpenFlow in mesoscale
Another way to control the path that your packets are taking is with OpenFlow controllers. In this exercise we are going to use an OpenFlow controller that will deflect packets from one server to another one. We will start first by reserving an OpenFlow sliver.
1. Make an OpenFlow sliver
In the previous step, we have used a pre-configured setup to run our test. In this experiment we will first reserve an OpenFlow sliver that will point to a controller to control our traffic.
1a. OpenFlow controller
In a typical OpenFlow experiment, the first step is to figure out where you are going to run your controller. The OpenFlow controller should be able to accept connections from switches. To make this tutorial simpler we have already setup the controllers that are running on a myPlc host at GPO.
In the previous example we have pointed all the traffic for subnets 10.42.144.0/24, 10.42.149.0/24 to a switch OpenFlow controller, that's why you were able to ping between your hosts, using that subnet.
1b. OpenFlow sliver
Until you have reserved an OpneFlow sliver, traffic would not be forwarded between your hosts on your assigned subnet.
Try pinging between the myPlc hosts from Exercise II but using the subnet that has been assigned to you. For example for Alice that was assigned subnet 133 she would try :
ping 10.42.133.YYY
Since there is OpenFlow sliver configured yet to forward packets in your subnet, ping should fail.
Ask us to give a slip of paper with the information about your OpenFlow sliver.
- Personalize your rspec. There is a sample OpenFlow rspec, under the rspecs
folder (rspecs/openflow-tutorial-template.rspec), that you would need to modify in order to reserve the flowspace that has been assigned to you. In the beginning of the file there is a list of tags you would need to replace. More specifically
- <USERNAME> : Your usernamer
- <CTRL-PORT> : The port that your controller will be listening on on
navis.gpolab.bbn.com
- <VLAN> : Which core VLAN you are using for your experiment.
- <IP_SUBNET_OCT> : The last octet of the subnet that has been assigned
to you
- <ETH_TYPE> : The ethtype that have been assigned to
you for use in this exercise
- Create the OpenFlow sliver. The flowspace for the tutorial is managed by an
AM running at GPO :
omni.py createsliver gposliceXX ./rspecs/openflow-tutorial-template.rspec -a of-tut
- Try pinging again
ping 10.42.<IP_SUBNET_OCT>.YYY
Notice how the first ping packets have higher delay than the subsequent packets. This is because when the first packet goes through, the switches will ask your controller about how to handle the packet. Your controller will install a flow on the switch to handle this and all subsequent packets of the flow. The large delay reflects the roundtrip time between the switch and your controller. Subsequent packets will be forwarded directly by the switch based on the flow that your controller installed and thus their switching will be faster.
1d. Try the Layer 2 ping using your controller
Try running the Layer 2 ping that you did before but using the <ETH_TYPE> that was assigned to you, in your OpenFlow slip.
sudo /usr/local/bin/pingPlus 00:0c:29:7b:c5:b3 <interface_name> <ETH_TYPE>
V. Cleanup resources
Although all your reservations, have expiration times, its always good practice to release the resources, after your experiment is over to make them available to other experimenters.
1. Deletesliver
For each createsliver that you have run, you will need to run deletesliver to release the resources
omni.py deletesliver -a <AM URL> sliceomni## omni.py deletesliver -a <AM URL> sliceflack##
For Alice this would look like
# Delete ProtoGENI sliver omni.py deletesliver -a pg-utan aliceslice # Delete MyPLC slivers omni.py deletesliver -a pl-stanford aliceslice omni.py deletesliver -a pl-gpo aliceslice #Delete OpenFlow slivers omni.py deletesliver -a of-tut aliceslice
You can not delete your slice. Although this will be cleaned up when it expires, it should be an empty container and thus does not hold up any resources.
Congratulations, you have finished the tutorial! Now you are ready to design and run your own experiments. Don't hesitate to email us with any questions you might have.
VI. Get Your Own Account
The accounts, that you used in the above steps, will be deactivated after the tutorial. If you do not already have an account at GPO's ProtoGENI cluster, you should get your own account so that you can further experiment with GENI.
1a. Get a temporary account
To get a temporary account that will be deactivated on March 31st 2012, apply for an account at this page https://www.pgeni.gpolab.bbn.com/joinproject.php3. For Project name use : GpoTutorial.
1b. Get a permanent account
If you would like to run your own experiments in this infrastructure, please contact us at help@geni.net to get a permanent account.
2. Getting to Know Omni
Now that you have your own account, you should configure Omni to use your own personal info, instead of the pre-made accounts.
2a. Generate and Download your ProtoGENI certificate
- Start Firefox within the VM and
https://www.pgeni.gpolab.bbn.com/login.php3 log in to your account.
- Select Generate SSL Cert and follow instructions.
- Select Download your SSL Cert (it's on the left of the page), and
click on the 'Download it in PEM format' link.
- Copy the contents of the page (Ctrl-A, Ctrl-C)
- Open a terminal (there is a shortcut on the top bar) under the
omni_tutorial directory there should be an ssh directory
cd omni_tutorial/ssh
- Open a file called <username>_cert.pem, paste your cert(Ctrl-Shift-V)
and save.
pico <username>_cert.pem> Ctrl-Shift-V Ctrl-X
- Remove the passphrase from your certificate. For security best
practices you should keep a passphrase on your certificate. If you want to avoid typing your passphrase throughout the tutorial, you might want to temporarily remove your passphrase
openssl rsa -in ./<username>_cert.pem -out ./<username>_cert_ct.pem openssl x509 -in ./<username>_cert.pem >> ./<username>_cert_ct.pem chmod 400 ./<username>_cert_ct.pem
If you want a way to type your passphrase only once per session, look
2b. Generate a pair of private/public keys.
In order to be able to login to the resources you will reserve will need a pair of keys. You can use any set of existing keys you might have, or you can generate a new pair. For security best practices you should have a passphrase on your keys.
ssh-keygen -f <username>_key
Now you can go back to [wiki:GEC11NetworkingExperiments/Tutorial#I.ConfigureOmni (I)] and follow the steps using your own certificate and key.
Creating PlanetLab Request RSpecs from Advertisement RSpecs
- Use Omni to download and save the advertised RSpec from the aggregate you
care about.
- In general the command is:
$ omni.py -a <url or nickname of aggregate> -t ProtoGENI 2 -o listresources
For example, to get the request RSpec from the MyPLC at the GPO Lab:$ omni.py -a pl-gpo -t ProtoGENI 2 -o listresources
(Version 2 of the AM API renames the ProtoGENI v2 RSpecs as GENI v3 RSpecs
so in the near future the command will become: {{{$ omni.py <url or nickname of aggregate> -t GENI 3 -o listresources}}})
- The output of this command is:
geni@geni-tutorial:~/Tutorials/Omni/gpousr20$ omni.py -a pl-gpo -t ProtoGENI 2 -o listresources INFO:omni:Loading config file omni_config INFO:omni:Using control framework pgeni INFO:omni:Saving output to a file. INFO:omni:Substituting AM nickname pl-gpo with URL http://myplc.gpolab.bbn.com:12346/, URN unspecified_AM_URN INFO:omni:Listed resources on 1 out of 1 possible aggregates. INFO:omni:Writing to 'rspec-myplc-gpolab-bbn-com-12346-.xml' INFO:omni: ------------------------------------------------------------ INFO:omni: Completed listresources: Options as run: aggregate: pl-gpo framework: pgeni native: True output: True rspectype: ('ProtoGENI', '2') Args: listresources Result Summary: Retrieved resources from 1 aggregates. Wrote rspecs from 1 aggregates to 1 files Saved listResources RSpec at unspecified_AM_URN to file rspec-myplc-gpolab-bbn-com-12346-.xml. . INFO:omni: ============================================================
- Copy and edit the RSpec file.
- Copy the advertisement RSpec file. The new file will become the
request RSpec. In general this would be:
cp <advertisement RSpec filename> <manifest RSpec filename>
The value of
<advertisement RSpec filename>
appears in the Omni
summary.
In this case we will generate a request for the node "navis":
cp rspec-myplc-gpolab-bbn-com-12346-.xml pl-gpo-navis.rspec
- Edit the request Rspec file:
emacs pl-gpo-navis.rspec &
orvi pl-gpo-navis.rspec
- Edit the
<rspec>
tag.- In the
<rspec>
tag, remove theexpires
and
- In the
generated
attributes.
- In the
<rspec>
tag, change thetype="advertisement"
attribute to type="request"
.
- In the
<rspec>
tag, change 'ad' to 'request' in the schema
location. That is, change this:
xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/ad.xsd"
To this:
xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd"
- The
<rspec>
tag should now look like this (note that the
whitespace has been adjusted for ease of reading):
<rspec type="request" xmlns="http://www.protogeni.net/resources/rspec/2" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd">
- Remove the
node
tags you do not want to request.- For example to only reserve the node
navis.gpolab.bbn.com
- For example to only reserve the node
remove the following text:
<node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+bain.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="bain.gpolab.bbn.com" exclusive="false"> .... </node> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+sardis.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="sardis.gpolab.bbn.com" exclusive="false"> .... </node> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+ganel.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="ganel.gpolab.bbn.com" exclusive="false"> .... </node> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+gardil.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="gardil.gpolab.bbn.com" exclusive="false"> .... </node>
- At this point the entire file should look like this:
<?xml version="1.0" ?> <!-- Resources at AM: URN: unspecified_AM_URN URL: http://myplc.gpolab.bbn.com:12346/ --> <rspec type="request" xmlns="http://www.protogeni.net/resources/rspec/2" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd"> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+navis.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="navis.gpolab.bbn.com" exclusive="false"> <hardware_type name="plab-pc"/> <hardware_type name="pc"/> <available now="true"/> <sliver_type name="plab-vnode"> <planetlab:initscript name="gpolab_sirius"/> </sliver_type> <location country="us" latitude="42.3897" longitude="-71.1475"/> </node> </rspec>
- Edit the
<node>
tag you are trying to reserve.- Remove all
<hardware_type>
,<available>
,
- Remove all
<location>
, and <planetlab:initscript"/>
tags which exist from the
<node>
tag you are trying to reserve.
- Add the attribute
client_id
to the<node>
tag you are
trying to reserve. The value is your choice, so here we will use
client_id="navis"
.
- The final request RSpec file should look like this:
<?xml version="1.0" ?> <!-- Resources at AM: URN: unspecified_AM_URN URL: http://myplc.gpolab.bbn.com:12346/ --> <rspec type="request" xmlns="http://www.protogeni.net/resources/rspec/2" xmlns:flack="http://www.protogeni.net/resources/rspec/ext/flack/1" xmlns:planetlab="http://www.planet-lab.org/resources/sfa/ext/planetlab/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd"> <node component_id="urn:publicid:IDN+plc:gpolab:gpolab+node+navis.gpolab.bbn.com" component_manager_id="urn:publicid:IDN+plc:gpolab+authority+am" component_name="navis.gpolab.bbn.com" exclusive="false" client_id="navis"> <sliver_type name="plab-vnode"> </sliver_type> </node> </rspec>
- Save the file.
- Run rspeclint to verify that the file is correct. If it works, you should
see no errors returned by the call.
In general, this is:
rspeclint http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd <request RSpec filename>For this example do:
rspeclint http://www.protogeni.net/resources/rspec/2 http://www.protogeni.net/resources/rspec/2/request.xsd pl-gpo-navis.rspec
Reserving ProtoGENI nodes with Flack
These instructions assume you have already created a slice using omni.
- Login to GPO's ProtoGENI instance with your tutorial credentials
- Click on: https://www.pgeni.gpolab.bbn.com/login.php3
- Use your GPO tutorial username and password as listed on the sheet of
paper you were handed on the way into the tutorial.
- Login to Flack.
- Open a separate browser window or tab.
- Click on: http://www.protogeni.net
- Scroll down to the large map in the middle of the page.
- Click "Login"
- In the pull down menu in the upper right hand corner select:
pgeni.gpolab.bbn.com
- Click "Download"
- Enter the password from the sheet of paper in the box near the bottom.
- Click "OK" in the lower left hand corner.
- You are now logged in.
- Reserve the ProtoGENI node listed on your sheet of paper.
- For a ProtoGENI Utah node, do the following:
- In the Resources window on the right, select the button for your
- For a ProtoGENI Utah node, do the following:
slice. A window will open.
- Click on "utahemulab.cm".
- Find the node listed on the sheet of paper in the list of nodes on
the left.
- Drag your node onto the blank canvas on the right.
- Click on the blue "i" (Information) icon on the node.
- Click "Add Install Service"
- In the two boxes, enter the following filling in your username:
"/home/<username>" in "http://192.1.249.166:8383/gec12tutorial_fedora.tar.gz"
- Click "Add Execute Service"
- In the box, enter the following filling in your username: "cd
/home/<username>/config_dir;./install.sh"
- Confirm Rspec version is set to "2" in the pull-down menu in the
upper right hand corner.
- Click "Apply" Note : After hitting apply, click on the blue "i" button again,
if you can't see the information you entered, then :
- Close this window.
- On your VM open the rspec with your favorite editor, and copy the
whole rspec
- On your slice canvas on the top, there is an import button. From
the list, choose the "Import from clipboard" option.
- The node should appear on your canvas, press the blue "i" button
to verify that it is loaded correctly.
- Click "Submit"
- For a ProtoGENI GPO node, do the following:
- In the Resources window on the right, select the button for your
slice. A window will open.
- Click on "bbn-pgeni.cm" (not "bbn-pgeni1.cm", "bbn-pgeni2.cm", or
"bbn-pgeni3.cm").
- Find the node listed on the sheet of paper in the list of nodes on
the left.
- Drag your node onto the blank canvas on the right.
- Click on the blue "i" (Information) icon on the node.
- Click "Add Install Service"
- In the two boxes, enter the following filling in your username:
"/home/<username>" in "http://192.1.249.166:8383/gec12tutorial_ubuntu.tar.gz"
- Click "Add Execute Service"
- In the box, enter the following filling in your username: "cd
/users/<username> ;sudo /bin/sh ./config_dir/install.sh"
- For the test image, enter:
"urn:publicid:IDN+pgeni.gpolab.bbn.com+image+emulab-ops//UBUNTU1004-STD"
- Choose Rspec version "0.2" from the pull-down menu in the upper
right hand corner.
- Click "Apply"
- Click "Submit"
- Confirm the reserved node is visible via omni.
- If you reserved a ProtoGENI Utah host, run:
omni.py -a pg-utah -t ProtoGENI 2 listresources <slicename>
- If you reserved a ProtoGENI GPO host, run:
omni.py -a pg-gpo -t ProtoGENI 0.2 listresources <slicename>
- If you reserved a ProtoGENI Utah host, run:
- Note that you can also download the request RSpec from Flack for later use
in a AM API client tool like Omni.
- In Flack, click on the magnifying glass in the upper right hand
corner.
- The request RSpec will appear in the window.
- You can then choose to download the RSpec in a file or copy it to
the clipboard.
AM URL Table
AM | Nickname | URL |
TUTORIAL AM | ||
Clemson's MyPLC | pl-clemson | http://myplc.clemson.edu:12346 |
GPO's ProtoGENI | pg-gpo | http://www.pgeni.gpolab.bbn.com/protogeni/xmlrpc/am |
GPO's MyPLC | pl-gpo | http://myplc.gpolab.bbn.com:12346 |
GPO's Tutorial OF | of-tut | https://foam-tutorial.gpolab.bbn.com:3626/foam/gapi/1 |
Rutgers MyPLC | pl-rutgers | https://plc.orbit-lab.org:12346/ |
Stanford's MyPLC | pl-stanford | https://myplc.stanford.edu:12346 |
Utah's ProtoGENI | pg-utah | http://www.emulab.net/protogeni/xmlrpc/am |
Washington's MyPLC | pl-washington | https://of.cs.washington.edu:12346/ |
Wisconsin's MyPLC | pl-wisconsin | https://wings-openflow-1.wail.wisc.edu:12346/ |
OTHER | ||
PlanetLab | plc | http://www.planet-lab.org:12346 |
Kentucky's ProtoGENI | pg-ky | https://www.uky.emulab.net/protogeni/xmlrpc/am |
Attachments (7)
- all-tabs.png (32.3 KB) - added by 13 years ago.
- flack-login.png (61.4 KB) - added by 13 years ago.
- choose-ams.png (20.3 KB) - added by 13 years ago.
- flack-addnodes.png (20.0 KB) - added by 13 years ago.
- flack-map.png (240.8 KB) - added by 13 years ago.
- flack-preview.png (10.7 KB) - added by 13 years ago.
- flack-import.png (16.0 KB) - added by 13 years ago.
Download all attachments as: .zip