= GEC 12 VM Setup =
This page is for keeping track of the setup of the VM that is going to be used for the GEC 12 tutorials.   The VM was create using !VirtualBox version 4.1.4.  It is running Ubuntu version 10.04 LTS.

''Please update this page with information on software you install on the VM: Name and version number of the software, location, etc..  Please put tutorial specific software (e.g. experiment software that is installed onto GENI resources) in the specific directories in the Tutorials directory under the user's home directory (e.g. /home/geni/Tutorials/Omni).''


== Installing Omni ==
To install Omni, just follow the instruction at [http://trac.gpolab.bbn.com/gcf/wiki/QuickStart Omni Quick Start]. 
In more detail, install the following packages
{{{
sudo apt-get install python-m2crypto python-dateutil \
                     python-pyopenssl libxmlsec1 xmlsec1 \
                     libxmlsec1-openssl libxmlsec1-dev
}}}

Download release gcf1.3 from http://www.gpolab.bbn.com/local-sw/ under /usr/local/geni/ and untar it. 
{{{
tar xvfz gcf-1.3.tar.gz
\rm gcf-1.3.tar.gz
ln -s gcf-1.3/ gcf
}}}

Added in the end of the .profile file of the GENI user these lines 
{{{
# set PATH so it includes geni software if it exists
if [ -d "/home/geni/Tutorials/Omni/gcf/src" ] ; then
    PATH="/home/geni/Tutorials/Omni/gcf/src:$PATH"
    export PYTHONPATH="/home/geni/Tutorials/Omni/gcf/src:$PYTHONPATH" 
fi
}}}

== Installing NOX ==


== Installing !NetServ ==


== Installing PrimoGENI ==


== Installing !DiCloud ==