Changes between Version 1 and Version 2 of GEC12OmniTutorial/Tutorial


Ignore:
Timestamp:
11/04/11 08:53:16 (13 years ago)
Author:
sedwards@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • GEC12OmniTutorial/Tutorial

    v1 v2  
    3131   * If you want to have a shared folder between your machine and the VM so that it's easier to transfer files during the tutorial, you have to do this before starting the VM. Follow [http://ozz314.wordpress.com/2008/05/08/virtualbox-shared-folders-between-ubuntu-guest-and-mac-host/ these instructions]   
    3232   * If you get an error running Omni, look at the [http://trac.gpolab.bbn.com/gcf/wiki/OmniTroubleShoot troubleshoot page] for help.
    33 
    34 = Overview of Alice's Experiment =
    35 Alice and Bob, two GENI experimenters, have volunteered to help us write these instructions. They are going to reserve separate hosts but they will be sharing the network infrastructure.
    36 
    37 [[Image(alice-bob-setup.png, 60%)]]
    38 
    39 Alice's information for the tutorial is :
    40 || '''<USERNAME>''' || alice || The user name for the tutorial's GPO ProtoGENI account ||
    41 ||'''ProtoGENI host''' || pg46.emulab.net (@clemson)|| Node controlled by Utah's ProtoGENI AM ||
    42 ||'''<PCNAME>''' || pg46 || For PG rspec ||
    43 ||'''MyPLC host''' || of-planet1.stanford.edu || Node controlled by Stanford's MyPLC AM ||
    44 ||'''Backup MyPLC host''' || navis.gpolab.bbn.com || Node controlled by GPO's MyPLC AM, if you run into problems with the first MyPLC host, you can try again with this host||
    45 ||'''<SUBNET>''' || 10.42.122.0/24 || The subnet to use for Layer3 ping ||
    46 ||'''<SUBNET-OCT>''' || 122 || For the OF rspec ||
    47 ||'''<ETH-TYPE>''' || 10122 || The ethernet type for Layer2 ping, for the OF rspec||
    48 ||'''<PORT>''' || 10122 || The port that the OpenFlow controller is listening on ||
    49 
    50 And after Alice and Bob completed the tutorial, Alice's scratchpad is :
    51 
    52 || '''SCRATCHPAD''' ||'''Complete this info'''  || ||
    53 ||'''My MyPLC host IP(131)''' || 10.42.131. '''90'''  || IP address of your MyPLC host on the pre-configured subnet ||
    54 ||'''MyPLC login name''' ||'''pgenigpolabbbncom_aliceslice '''|| Your login name to the MyPLC hosts ||
    55 ||'''Neighbor's MyPLC host IP(131)''' || 10.42.131. '''52'''|| IP address of your neighbor's MyPLC host on the pre-configured subnet ||
    56 ||'''My MyPLC host IP(your subnet)''' || 10.42 . '''122''' . '''90'''|| The IP address of your MyPLC host on your subnet ||
    57 ||'''Neighbor's MyPLC host IP(your subnet)''' || 10.42 . '''122''' . '''52'''|| IP address of your neighbor's MyPLC host on the your subnet ||
    58 
    5933= I. Getting Started =
    6034== 1. Configure Omni ==