wiki:GEC11VMSetup

Version 6 (modified by nriga@bbn.com, 13 years ago) (diff)

--

This page is for keeping track of the setup of the VM that is going to be used for the Tutorial.

These instructions are for VirtualBox 4.08.

In order to make the VM more usable, installed the Guest Additions (Devices -> Install Guest Additions).

Installing Omni

To install Omni, just follow the instruction at Omni Quick Start. In more detail, install the following packages

sudo apt-get install python-m2crypto python-dateutil \
                     python-pyopenssl libxmlsec1 xmlsec1 \
                     libxmlsec1-openssl libxmlsec1-dev

Download release gcf1.3 from http://www.gpolab.bbn.com/local-sw/ under /usr/local/geni/ and untar it.

tar xvfz gcf-1.3.tar.gz
\rm gcf-1.3.tar.gz
ln -s gcf-1.3/ gcf

Also placed files gcf.ini and omni.ini, in the home dir of the GENI user.

Installing NOX

Downloaded the VM with Omni installed. Then followed the instructions from here.

cd /etc/apt/sources.list.d
sudo wget http://openflowswitch.org/downloads/debian/nox.list
sudo apt-get update
sudo apt-get install nox-dependencies

Since nox-dependencies is not a common package, just to keep track of which packages are installed, these are the packages included in nox-dependencies :

> dpkg --info nox-dependencies.deb
 new debian package, version 2.0.
 size 788 bytes: control archive= 491 bytes.
     511 bytes,     9 lines      control              
     499 bytes,     9 lines      control~             
 Package: nox-dependencies
 Version: 0.1
 Architecture: all
 Depends: doxygen, doxypy, build-essential, python-dev, autoconf, automake, make, g++, libtool, python-twisted, python-dev, swig, libssl-dev, libboost-dev (>= 1.34.1), libboost-test-dev, libboost-filesystem-dev
 Suggests: git-core, libsqilte3-dev, python-simplejson
 Maintainer: KK Yap [yapkke@stanford.edu]
 Description: This package installs the dependencies needed for NOX
 	     to be built from source.  There is no actual content
 	     in this package.

After the dependencies are installed

cd
git clone git://noxrepo.org/nox
cd nox
./boot.sh
cd ../
mkdir nox_build
cd nox_build
../nox/configure
make -j 5

To verify that the install was successful

./nox_core -h

Attachments (2)

Download all attachments as: .zip