Changes between Version 116 and Version 117 of Embedded Real-Time Measurements
- Timestamp:
- 09/17/11 15:25:46 (13 years ago)
Legend:
- Unmodified
- Added
- Removed
- Modified
-
Embedded Real-Time Measurements
v116 v117 148 148 [[Image(ERM_Box_Architecture.png, 45%)]] [[BR]] 149 149 150 The ERM Box is a robust, universally deployable device that consists of a suite of software and a set of hardware components that can support embedded real-time optical layer measurement, and further utilize this measurement capability to support cross-layer control. The following codes are soon to bereleased: [[BR]]150 The ERM Box is a robust, universally deployable device that consists of a suite of software and a set of hardware components that can support embedded real-time optical layer measurement, and further utilize this measurement capability to support cross-layer control. The following codes are released: [[BR]] 151 151 152 152 - NetFPGA Development Board HW Verilog Code [[BR]] … … 154 154 - Network Equipment Interface [[BR]] 155 155 -> perfSONAR MP code used to obtain optical layer measurements from the Polatis OXC and Infinera DTN (see IMF code release)[[BR]] 156 -> Software interface to obtain optical layer measurements from the Fujitsu FW9500 and a specially-built optical performance monitor (OPM)[[BR]]157 156 158 Additionally, we developed a simulation environment with networking model incorporating the ERM Box and cross-layer measurement capabilities enabling experimental modeling in large scale networks. These simulation source codes will also be released soon. [[BR]]157 Additionally, we developed a simulation environment with networking model incorporating the ERM Box and cross-layer measurement capabilities enabling experimental modeling in large scale networks. These simulation source codes are also released. [[BR]] 159 158 160 159 === Connectivity ===