Changes between Version 1 and Version 2 of Ciena Core Director switch component manager interface


Ignore:
Timestamp:
10/19/09 13:55:38 (10 years ago)
Author:
Christopher Small
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Ciena Core Director switch component manager interface

    v1 v2  
    4242== Hardware Overview ==
    4343
    44 [[Image(cdci.png, 600px)]]
     44[[Image(CDCI.png, 600px)]][[BR]]
    4545Figure 1: Hardware Overview
    4646
     
    217217routing, system alarms, and network activity.
    218218
    219 [[Image(nodemanager.png, 800px)]]
     219[[Image(nodemanager.png, 800px)]][[BR]]
    220220Figure 2: Node Manager Software
    221221
     
    372372 * DENY - Denied (or error)
    373373 * PRTL - Partial response
    374  *
    375374
    376375Line 3 displays the specified report data or error codes (for example,
     
    543542the destination port.
    544543
    545 [[Image(osrp.png, 600px)]]
     544[[Image(OSRP.png, 600px)]][[BR]]
    546545Figure 3: OSRP
    547546
     
    556555
    557556There are three types of SNCs: dynamic, permanent, and SNCP Auto
    558 CrossConnect.
     557!CrossConnect.
    559558
    560559A dynamic SNC is an end-to-end circuit whose path can traverse any
     
    619618    (applicable with theSONET/SDH Gateway Utility).  The cross connect (path   
    620619    level) end points must be at compatible rates. For example, a VC-4
    621      on an STM-1 can be cross connected to an STS-3c on an OC-48.
     620    on an STM-1 can be cross connected to an STS-3c on an OC-48.
    622621  * Automatic S-bit translation between SONET and SDH interfaces
    623622==== End Points ====
     
    658657== Subnet Control Model ==
    659658
    660 [[Image(subnetcontrol.png, 800px)]]
     659[[Image(subnetcontrol.png, 800px)]][[BR]]
    661660Figure 4: Subnet Control
    662661