Opened 15 years ago
Closed 15 years ago
#188 closed (fixed)
Third SPP node shipped
| Reported by: | Josh Karlin | Owned by: | Josh Karlin |
|---|---|---|---|
| Priority: | major | Milestone: | SPP: Deploy three SPP nodes - |
| Component: | SPP | Version: | SPIRAL1 |
| Keywords: | Cc: | ||
| Dependencies: |
Description
KANS SPP node has been received and should be ready for install. Wiring/IP assignments attached to this ticket.
Attachments (1)
Change History (6)
comment:1 Changed 15 years ago by
| Owner: | changed from somebody to Josh Karlin |
|---|
Changed 15 years ago by
| Attachment: | KANS_install-SPP.xls added |
|---|
comment:2 Changed 15 years ago by
comment:3 Changed 15 years ago by
Installation is ongoing. Having problems reaching the CP at its proper IP address although the I2 NP router has seen its MAC address. I2 install team will try to use tcpdump on the I2 router to see what IP it's coming from.
comment:4 Changed 15 years ago by
John DeHart reports SPP "boots and more importantly reboots." VLANS on ProtoGENI were configured and data is passing. All the connections between the SPP Chassis and the ProtoGENI switch work and all 3 of the connections between the SPP Chassis and the I2 Switch work. Leaving the ticket open until Monday so Josh can check with John on whether there are any outstanding SPP issues.
Initial VLAN configurations:
Ports 1 and 2: VLAN #3004 Ports 3 and 4: VLAN #3005 Ports 5 and 6: VLAN #3006 Port 7: VLAN #3007
Port 7 was changed to VLAN #3006 as well.
Discussions about configuring connections between SPPs in process.
comment:5 Changed 15 years ago by
| Resolution: | → fixed |
|---|---|
| Status: | new → closed |
Install is completed. John DeHart says all is well. The KANS SPP node is able to talk to SALT and WASH nodes through VLAN (described in previous comment) over ProtoGENI/I2 Infinera.
KANS install should be Sep. 9th-11th according to Christopher Small at I2.