Possible new WiMAX modems for use in Spiral 4: 1) Teltonika modems: 1a) UM62x1 USB WiMAX dongles, per your measurements and pending order, $33-55 From Derek Meyer: I made a wiki page for all to view regarding the USB devices: http://groups.geni.net/geni/wiki/WIMXUWI/TeltonikaUM62x1 "Just worked", happy with them. Good RSSI, comparable to Intel 6250 inside laptop Teltonika would customize them Mimo Same chipset as the HTC EVO handset How To's Linux Device will look like a cdrom eject Can use: wget --http-user admin --http-password admin -qO - http://192.168.0.1/cgi/cli?[command] See data collection below for how to find a list of commands. Embedded Linux Verified working with Openwrt on Routerstation Pro. TODO: Complete kernel module list. Kernel has to be compiled with cdc_ether, scsi cdrom If using Openwrt, compile busybox with eject command or dmesg to find out what the device shows up as: opkg update opkg install sdparm sdparm --command=eject /dev/sg? Then use the above Linux tutorial. Windows Verified working in Windows 7 64-bit Did not test without installing Teltonika software Install software when prompted to. Mac OS Verified working under Lion Settings After the device is set up, the USB device will appear as a wired Ethernet device with the, dhcp release, IP address of 192.168.0.x. 1. Favorite browser ==> 192.168.0.1 The default username for the administrative interface that we will be using is: Username: admin Password: admin 2. Configure Wimax Click on WiMAX tab Click on Channels sub-tab Add your base station(s) information 3. Verify connectivity Note that your settings are stored on the device, so this will only have to be done once for each device. Data collection & Misc One tab I would like to point out is the CLI (command line interface) that you can run several commands to collect all kinds of information. A list of commands can be viewed with the help command. Question: Can we modify the firmware? 1b) RUT425 WiMAX router; per their website, this looks like it might be very good for vehicular applications Derek Meyer: No experience yet Will order 2 for testing 2) Airspan modems: From Gregg Tome on 12/14/11: All CPE’s support Windows (USB, IDU’s ODU’s) and we are checking with PLM to see if they support Linux, Open Source. 2a) MiMAX-USB-V15-260 user device (indoor) $120; Ivan intends to purchase x2 per base station From Gregg Tome on 12/14/11: MiMAX-USB-V15-260 user device (indoor) - USB Device: • Plug into lap top device. • Designed to support both Outdoor and indoor signal. • Supports Windows and we are checking with PLM to see if they support Linux, Open Source. 2b) M-Pro-B-V95-260-I-US user device (outdoor and indoor) $472; Ivan intends to purchase a few From Gregg Tome on 12/14/11: Pro-B-V95-260-I – Outdoor Device: • This is an Outdoor CPE that includes an indoor WiFI router and VOIP Ports. • The Manufacturer of these ODU’s is currently working on a new Version and we have not received the new version yet and I don’t have a timeline from them on when they would be available. Question: Could this be used on a vehicle? 2c) M-PRO-V72-260I-US From Gregg Tome on 12/14/11: *I recommend the ProV Outdoor unit – MiMAX-Pro V Series 2.5-2.7GHz TDD PN M-PRO-V72-260I-US: • I have attached the product specs for these and they are excellent. • They do provide outdoor coverage only. Question: Could this be used on a vehicle? 2d) M-EASY-V35-260I-US $187; Ivan intends to purchase a few From Gregg Tome on 12/14/11: M-EASY-V35-260I-US – Indoor Device: • Indoor device that sits on a desk. • Connects via Ethernet. • Supports Windows and we are checking to see if it supports Linux, Open Source.