source: trunk/GENIRacks/ExoGENI/Spiral4/Rspecs/AcceptanceTests/EG-EXP-6/README.txt @ 1402

Last change on this file since 1402 was 1402, checked in by lnevers@bbn.com, 8 years ago

Adding EG-EXP-6 RSpecs for 3 experiments

File size: 1.4 KB
Line 
1This directory contains the request RSpecs used for the
2three experiments described in EG-EXP-6.
3
4Experiment1/User lnevers: (EG-EXP-6-exp1-*)
5
6-       1 VM w/shared VLAN at BBN 
7-       1 VM w/shared VLAN at RENCI
8-       SubNet used 10.42.19.0
9-       OpenFlow Controller on port 33017
10
11Experiment2/User lnevers1: (EG-EXP-6-exp2-*)
12
13-       2 VM w/shared VLAN at BBN (See note 1)
14-       2 VM w/shared VLAN at RENCI
15-       SubNet used 10.42.18.0
16-       OpenFlow Controller on port 33018
17
18Experiment3/User lnevers2: (EG-EXP-6-exp3-*)
19-       1 PG GPO MESO
20-       1 WAPG
21-       1 VM w/shared VLAN at BBN
22-       SubNet used 10.42.11.0
23-       OpenFlow Controller is on port 33020
24
25Note 1: Test case was originally written to include one bare metal node.
26The bare metal nodes are only available via ExoSM, which brings up the
27following options:
28
29 a. Replace the BBN SM reservation with a reservation via the ExoSM,
30but this will cause the next step to fail. The RENCI SM reservation
31will report that a sliver by that name already exists, due to the
32ExoSM request. To get around this problem, one option is to replace
33the bare metal node with a VM, so that the requests could be submitted
34as expected to each of the local SMs.
35
36b. Replace the BBN SM reservation with a reservation via the ExoSM, but
37create a new slice and sliver name for the RCI portion. So the BBN
38resources are reserved via the ExoSM, and the RENCI resources are
39reserved via the local RENCI SM.
40
41Option a was chosen for this test.
42
Note: See TracBrowser for help on using the repository browser.