Ticket #179: boot-messages.txt

File boot-messages.txt, 31.4 KB (added by lnevers@bbn.com, 11 years ago)
Line 
1iroot@debian:/var/log# dmesg
2[    0.000000] Initializing cgroup subsys cpuset
3[    0.000000] Initializing cgroup subsys cpu
4[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:22:28 UTC 2012
5[    0.000000] Command line: root=/dev/vda console=ttyS0
6[    0.000000] KERNEL supported cpus:
7[    0.000000]   Intel GenuineIntel
8[    0.000000]   AMD AuthenticAMD
9[    0.000000]   Centaur CentaurHauls
10[    0.000000] BIOS-provided physical RAM map:
11[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
12[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
13[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
14[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
15[    0.000000]  BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
16[    0.000000]  BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
17[    0.000000] DMI 2.4 present.
18[    0.000000] last_pfn = 0x3fffd max_arch_pfn = 0x400000000
19[    0.000000] MTRR default type: write-back
20[    0.000000] MTRR fixed ranges enabled:
21[    0.000000]   00000-9FFFF write-back
22[    0.000000]   A0000-BFFFF uncachable
23[    0.000000]   C0000-FFFFF write-protect
24[    0.000000] MTRR variable ranges enabled:
25[    0.000000]   0 base 0000E0000000 mask 3FFFE0000000 uncachable
26[    0.000000]   1 disabled
27[    0.000000]   2 disabled
28[    0.000000]   3 disabled
29[    0.000000]   4 disabled
30[    0.000000]   5 disabled
31[    0.000000]   6 disabled
32[    0.000000]   7 disabled
33[    0.000000] PAT not supported by CPU.
34[    0.000000] initial memory mapped : 0 - 20000000
35[    0.000000] init_memory_mapping: 0000000000000000-000000003fffd000
36[    0.000000]  0000000000 - 003fe00000 page 2M
37[    0.000000]  003fe00000 - 003fffd000 page 4k
38[    0.000000] kernel direct mapping tables up to 3fffd000 @ 8000-b000
39[    0.000000] RAMDISK: 3f631000 - 3ffef6ab
40[    0.000000] ACPI: RSDP 00000000000fda20 00014 (v00 BOCHS )
41[    0.000000] ACPI: RSDT 000000003fffd740 00030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
42[    0.000000] ACPI: FACP 000000003ffffe40 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
43[    0.000000] ACPI: DSDT 000000003fffd900 024FD (v01   BXPC   BXDSDT 00000001 INTL 20090123)
44[    0.000000] ACPI: FACS 000000003ffffe00 00040
45[    0.000000] ACPI: SSDT 000000003fffd860 0009E (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
46[    0.000000] ACPI: APIC 000000003fffd770 00078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
47[    0.000000] ACPI: Local APIC address 0xfee00000
48[    0.000000] No NUMA configuration found
49[    0.000000] Faking a node at 0000000000000000-000000003fffd000
50[    0.000000] Bootmem setup node 0 0000000000000000-000000003fffd000
51[    0.000000]   NODE_DATA [0000000000009000 - 0000000000010fff]
52[    0.000000]   bootmap [0000000000011000 -  0000000000018fff] pages 8
53[    0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fffd000]
54[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
55[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
56[    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS ==> [0001000000 - 00016d95c4]
57[    0.000000]   #3 [003f631000 - 003ffef6ab]          RAMDISK ==> [003f631000 - 003ffef6ab]
58[    0.000000]   #4 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
59[    0.000000]   #5 [00016da000 - 00016da079]              BRK ==> [00016da000 - 00016da079]
60[    0.000000]   #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
61[    0.000000] found SMP MP-table at [ffff8800000fda70] fda70
62[    0.000000] kvm-clock: cpu 0, msr 0:151a701, boot clock
63[    0.000000]  [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001c00000-ffff8800029fffff] on node 0
64[    0.000000] Zone PFN ranges:
65[    0.000000]   DMA      0x00000000 -> 0x00001000
66[    0.000000]   DMA32    0x00001000 -> 0x00100000
67[    0.000000]   Normal   0x00100000 -> 0x00100000
68[    0.000000] Movable zone start PFN for each node
69[    0.000000] early_node_map[2] active PFN ranges
70[    0.000000]     0: 0x00000000 -> 0x0000009d
71[    0.000000]     0: 0x00000100 -> 0x0003fffd
72[    0.000000] On node 0 totalpages: 262042
73[    0.000000]   DMA zone: 56 pages used for memmap
74[    0.000000]   DMA zone: 102 pages reserved
75[    0.000000]   DMA zone: 3839 pages, LIFO batch:0
76[    0.000000]   DMA32 zone: 3528 pages used for memmap
77[    0.000000]   DMA32 zone: 254517 pages, LIFO batch:31
78[    0.000000] ACPI: PM-Timer IO Port: 0xb008
79[    0.000000] ACPI: Local APIC address 0xfee00000
80[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
81[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
82[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
83[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
84[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
85[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
86[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
87[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
88[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
89[    0.000000] ACPI: IRQ0 used by override.
90[    0.000000] ACPI: IRQ2 used by override.
91[    0.000000] ACPI: IRQ5 used by override.
92[    0.000000] ACPI: IRQ9 used by override.
93[    0.000000] ACPI: IRQ10 used by override.
94[    0.000000] ACPI: IRQ11 used by override.
95[    0.000000] Using ACPI (MADT) for SMP configuration information
96[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
97[    0.000000] nr_irqs_gsi: 24
98[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
99[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
100[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
101[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
102[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bffbc000)
103[    0.000000] Booting paravirtualized kernel on KVM
104[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:1 nr_node_ids:1
105[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u2097152
106[    0.000000] pcpu-alloc: s90328 r8192 d24360 u2097152 alloc=1*2097152
107[    0.000000] pcpu-alloc: [0] 0
108[    0.000000] kvm-clock: cpu 0, msr 0:1815701, primary cpu clock
109[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258356
110[    0.000000] Policy zone: DMA32
111[    0.000000] Kernel command line: root=/dev/vda console=ttyS0
112[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
113[    0.000000] Initializing CPU#0
114[    0.000000] Checking aperture...
115[    0.000000] No AGP bridge found
116[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
117[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
118[    0.000000] Memory: 1016388k/1048564k available (3083k kernel code, 396k absent, 31780k reserved, 2048k data, 592k init)
119[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
120[    0.000000] Hierarchical RCU implementation.
121[    0.000000] NR_IRQS:4352 nr_irqs:256
122[    0.000000] Console: colour VGA+ 80x25
123[    0.000000] console [ttyS0] enabled
124[    0.000000] Detected 1999.999 MHz processor.
125[    0.008000] Calibrating delay loop (skipped) preset value.. 3999.99 BogoMIPS (lpj=7999996)
126[    0.008000] Security Framework initialized
127[    0.008000] SELinux:  Disabled at boot.
128[    0.008000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
129[    0.008000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
130[    0.008000] Mount-cache hash table entries: 256
131[    0.008578] Initializing cgroup subsys ns
132[    0.009004] Initializing cgroup subsys cpuacct
133[    0.009455] Initializing cgroup subsys devices
134[    0.009907] Initializing cgroup subsys freezer
135[    0.010359] Initializing cgroup subsys net_cls
136[    0.010864] CPU: L1 I cache: 32K, L1 D cache: 32K
137[    0.011365] CPU: L2 cache: 4096K
138[    0.012023] CPU 0/0x0 -> Node 0
139[    0.012349] mce: CPU supports 10 MCE banks
140[    0.012817] Performance Events: p6 PMU driver.
141[    0.013294] ... version:                0
142[    0.013709] ... bit width:              32
143[    0.014128] ... generic registers:      2
144[    0.014537] ... value mask:             00000000ffffffff
145[    0.015074] ... max period:             000000007fffffff
146[    0.015601] ... fixed-purpose events:   0
147[    0.016004] ... event mask:             0000000000000003
148[    0.016565] SMP alternatives: switching to UP code
149[    0.028455] Freeing SMP alternatives: 28k freed
150[    0.028960] ACPI: Core revision 20090903
151[    0.030302] Setting APIC routing to flat
152[    0.031869] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
153[    0.032003] CPU0: Intel QEMU Virtual CPU version (cpu64-rhel6) stepping 03
154[    0.036001] Brought up 1 CPUs
155[    0.036001] Total of 1 processors activated (3999.99 BogoMIPS).
156[    0.036001] CPU0 attaching NULL sched-domain.
157[    0.036001] devtmpfs: initialized
158[    0.036747] regulator: core version 0.5
159[    0.037192] NET: Registered protocol family 16
160[    0.037723] ACPI: bus type pci registered
161[    0.038218] PCI: Using configuration type 1 for base access
162[    0.039031] bio: create slab <bio-0> at 0
163[    0.039752] ACPI: EC: Look up EC in DSDT
164[    0.041303] ACPI: Interpreter enabled
165[    0.041694] ACPI: (supports S0 S5)
166[    0.042091] ACPI: Using IOAPIC for interrupt routing
167[    0.045119] ACPI: No dock devices found.
168[    0.045552] ACPI: PCI Root Bridge [PCI0] (0000:00)
169[    0.046572] pci 0000:00:01.1: reg 20 io port: [0xc000-0xc00f]
170[    0.046780] pci 0000:00:01.2: reg 20 io port: [0xc020-0xc03f]
171[    0.047022] pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
172[    0.047754] pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
173[    0.052008] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xf0000000-0xf1ffffff]
174[    0.056006] pci 0000:00:02.0: reg 14 32bit mmio: [0xf2000000-0xf2000fff]
175[    0.066031] pci 0000:00:02.0: reg 30 32bit mmio pref: [0xf2010000-0xf201ffff]
176[    0.066147] pci 0000:00:03.0: reg 10 io port: [0xc100-0xc1ff]
177[    0.066205] pci 0000:00:03.0: reg 14 32bit mmio: [0xf2020000-0xf20200ff]
178[    0.066308] pci 0000:00:03.0: reg 30 32bit mmio pref: [0xf2030000-0xf203ffff]
179[    0.066453] pci 0000:00:04.0: reg 10 io port: [0xc200-0xc23f]
180[    0.066484] pci 0000:00:04.0: reg 14 32bit mmio: [0xf2040000-0xf2040fff]
181[    0.066742] pci 0000:00:05.0: reg 10 io port: [0xc240-0xc25f]
182[    0.067037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
183[    0.072149] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
184[    0.072961] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
185[    0.073758] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
186[    0.074544] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
187[    0.075330] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
188[    0.076091] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
189[    0.077026] vgaarb: loaded
190[    0.077388] PCI: Using ACPI for IRQ routing
191[    0.078050] Switching to clocksource kvm-clock
192[    0.079415] pnp: PnP ACPI init
193[    0.079797] ACPI: bus type pnp registered
194[    0.080001] pnp: PnP ACPI: found 7 devices
195[    0.080001] ACPI: ACPI bus type pnp unregistered
196[    0.084056] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
197[    0.084058] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
198[    0.084085] NET: Registered protocol family 2
199[    0.084673] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
200[    0.086188] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
201[    0.087774] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
202[    0.088672] TCP: Hash tables configured (established 131072 bind 65536)
203[    0.089443] TCP reno registered
204[    0.089842] NET: Registered protocol family 1
205[    0.090363] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
206[    0.091044] pci 0000:00:01.0: PIIX3: Enabling Passive Release
207[    0.091714] pci 0000:00:01.0: Activating ISA DMA hang workarounds
208[    0.092484] pci 0000:00:02.0: Boot video device
209[    0.092513] Unpacking initramfs...
210[    0.279054] Freeing initrd memory: 9977k freed
211[    0.281469] audit: initializing netlink socket (disabled)
212[    0.282046] type=2000 audit(1367847522.280:1): initialized
213[    0.284982] HugeTLB registered 2 MB page size, pre-allocated 0 pages
214[    0.286491] VFS: Disk quotas dquot_6.5.2
215[    0.286940] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
216[    0.287664] msgmni has been set to 2004
217[    0.288231] alg: No test for stdrng (krng)
218[    0.288702] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
219[    0.289475] io scheduler noop registered
220[    0.289882] io scheduler anticipatory registered
221[    0.290367] io scheduler deadline registered
222[    0.290846] io scheduler cfq registered (default)
223[    0.292151] Linux agpgart interface v0.103
224[    0.292609] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
225[    0.293421] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
226[    0.294202] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
227[    0.295091] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
228[    0.295832] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
229[    0.296504] input: Macintosh mouse button emulation as /devices/virtual/input/input0
230[    0.297367] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
231[    0.298624] serio: i8042 KBD port at 0x60,0x64 irq 1
232[    0.299156] serio: i8042 AUX port at 0x60,0x64 irq 12
233[    0.299746] mice: PS/2 mouse device common for all mice
234[    0.300544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
235[    0.301615] rtc_cmos 00:01: RTC can wake from S4
236[    0.302128] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
237[    0.302821] rtc0: alarms up to one day, 114 bytes nvram
238[    0.303382] cpuidle: using governor ladder
239[    0.303812] cpuidle: using governor menu
240[    0.304249] No iBFT detected.
241[    0.304740] TCP cubic registered
242[    0.305187] NET: Registered protocol family 10
243[    0.306050] Mobile IPv6
244[    0.306326] NET: Registered protocol family 17
245[    0.306834] PM: Resume from disk failed.
246[    0.306839] registered taskstats version 1
247[    0.307484] rtc_cmos 00:01: setting system clock to 2013-05-06 13:38:42 UTC (1367847522)
248[    0.308365] Initalizing network drop monitor service
249[    0.308895] Freeing unused kernel memory: 592k freed
250[    0.309535] Write protecting the kernel read-only data: 4240k
251[    0.323520] udev[46]: starting version 164
252[    0.422882] SCSI subsystem initialized
253[    0.425288] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
254[    0.426165] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
255[    0.426845] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
256[    0.444260] usbcore: registered new interface driver usbfs
257[    0.445000] usbcore: registered new interface driver hub
258[    0.445724] usbcore: registered new device driver usb
259[    0.446752] eth0: RTL-8139C+ at 0xffffc90000584000, fa:16:3e:36:1c:fc, IRQ 11
260[    0.447607] 8139cp 0000:00:03.0: setting latency timer to 64
261[    0.447781] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
262[    0.448492] virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
263[    0.449490] virtio-pci 0000:00:04.0: setting latency timer to 64
264[    0.450214] FDC 0 is a S82078B
265[    0.450801] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
266[    0.451472] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
267[    0.452609] virtio-pci 0000:00:05.0: setting latency timer to 64
268[    0.455123] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
269[    0.458869] 8139too Fast Ethernet driver 0.9.28
270[    0.459994] uhci_hcd: USB Universal Host Controller Interface driver
271[    0.460791] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, high) -> IRQ 10
272[    0.461759] uhci_hcd 0000:00:01.2: setting latency timer to 64
273[    0.461767] uhci_hcd 0000:00:01.2: UHCI Host Controller
274[    0.462376] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
275[    0.463295] uhci_hcd 0000:00:01.2: irq 10, io base 0x0000c020
276[    0.463983] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
277[    0.464831] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
278[    0.465686] usb usb1: Product: UHCI Host Controller
279[    0.466245] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
280[    0.466964] usb usb1: SerialNumber: 0000:00:01.2
281[    0.468850] libata version 3.00 loaded.
282[    0.470669]   alloc irq_desc for 24 on node -1
283[    0.470672]   alloc kstat_irqs on node -1
284[    0.470694] virtio-pci 0000:00:04.0: irq 24 for MSI/MSI-X
285[    0.470696]   alloc irq_desc for 25 on node -1
286[    0.470697]   alloc kstat_irqs on node -1
287[    0.470712] virtio-pci 0000:00:04.0: irq 25 for MSI/MSI-X
288[    0.986542] usb usb1: configuration #1 chosen from 1 choice
289[    0.987289] hub 1-0:1.0: USB hub found
290[    0.987751] hub 1-0:1.0: 2 ports detected
291[    0.988326] ata_piix 0000:00:01.1: version 2.13
292[    0.988379] ata_piix 0000:00:01.1: setting latency timer to 64
293[    0.989397] scsi0 : ata_piix
294[    0.989851] scsi1 : ata_piix
295[    0.990234] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
296[    0.991021] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
297[    1.192448]  vda: unknown partition table
298[    1.251662] device-mapper: uevent: version 1.0.3
299[    1.252568] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
300[    1.377222] udev[362]: starting version 164
301[    1.400032] usb 1-1: new full speed USB device using uhci_hcd and address 2
302[    1.512936] input: PC Speaker as /devices/platform/pcspkr/input/input2
303[    1.514594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
304[    1.515538] ACPI: Power Button [PWRF]
305[    1.532911] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
306[    1.534687] processor LNXCPU:00: registered as cooling_device0
307[    1.565548] Error: Driver 'pcspkr' is already registered, aborting...
308[    1.702230] usb 1-1: New USB device found, idVendor=0627, idProduct=0001
309[    1.703045] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
310[    1.703906] usb 1-1: Product: QEMU USB Tablet
311[    1.704459] usb 1-1: Manufacturer: QEMU 0.12.1
312[    1.704968] usb 1-1: SerialNumber: 42
313[    1.705606] usb 1-1: configuration #1 chosen from 1 choice
314[    1.725319] usbcore: registered new interface driver hiddev
315[    1.751266] input: QEMU 0.12.1 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
316[    1.752694] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.12.1 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
317[    1.754225] usbcore: registered new interface driver usbhid
318[    1.755031] usbhid: v2.6:USB HID core driver
319[    1.961343] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
320[    1.966387] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
321[    6.908397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
322[    6.910672] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
323[    6.911536] acpiphp: Slot [1] registered
324[    6.912479] acpiphp: Slot [2] registered
325[    6.913059] acpiphp: Slot [3] registered
326[    6.913657] acpiphp: Slot [4] registered
327[    6.914241] acpiphp: Slot [5] registered
328[    6.914845] acpiphp: Slot [6] registered
329[    6.915447] acpiphp: Slot [7] registered
330[    6.915998] acpiphp: Slot [8] registered
331[    6.916729] acpiphp: Slot [9] registered
332[    6.917341] acpiphp: Slot [10] registered
333[    6.917918] acpiphp: Slot [11] registered
334[    6.918511] acpiphp: Slot [12] registered
335[    6.919093] acpiphp: Slot [13] registered
336[    6.919699] acpiphp: Slot [14] registered
337[    6.920365] acpiphp: Slot [15] registered
338[    6.920951] acpiphp: Slot [16] registered
339[    6.921552] acpiphp: Slot [17] registered
340[    6.922117] acpiphp: Slot [18] registered
341[    6.922726] acpiphp: Slot [19] registered
342[    6.923293] acpiphp: Slot [20] registered
343[    6.923875] acpiphp: Slot [21] registered
344[    6.924602] acpiphp: Slot [22] registered
345[    6.925196] acpiphp: Slot [23] registered
346[    6.925772] acpiphp: Slot [24] registered
347[    6.926341] acpiphp: Slot [25] registered
348[    6.926951] acpiphp: Slot [26] registered
349[    6.927522] acpiphp: Slot [27] registered
350[    6.928209] acpiphp: Slot [28] registered
351[    6.928798] acpiphp: Slot [29] registered
352[    6.929366] acpiphp: Slot [30] registered
353[    6.929958] acpiphp: Slot [31] registered
354[   12.640067] eth0: no IPv6 routers present
355[  179.597680] pci 0000:00:06.0: reg 10 io port: [0x00-0x1f]
356[  179.597732] pci 0000:00:06.0: reg 14 32bit mmio: [0x000000-0x000fff]
357[  179.597830] pci 0000:00:06.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
358[  179.598759] pci 0000:00:00.0: no hotplug settings from platform
359[  179.599479] pci 0000:00:00.0: using default PCI settings
360[  179.600316] pci 0000:00:01.0: no hotplug settings from platform
361[  179.601030] pci 0000:00:01.0: using default PCI settings
362[  179.601667] ata_piix 0000:00:01.1: no hotplug settings from platform
363[  179.602427] ata_piix 0000:00:01.1: using default PCI settings
364[  179.603141] uhci_hcd 0000:00:01.2: no hotplug settings from platform
365[  179.603989] uhci_hcd 0000:00:01.2: using default PCI settings
366[  179.606445] piix4_smbus 0000:00:01.3: no hotplug settings from platform
367[  179.607247] piix4_smbus 0000:00:01.3: using default PCI settings
368[  179.607972] pci 0000:00:02.0: no hotplug settings from platform
369[  179.608684] pci 0000:00:02.0: using default PCI settings
370[  179.611813] 8139cp 0000:00:03.0: no hotplug settings from platform
371[  179.612624] 8139cp 0000:00:03.0: using default PCI settings
372[  179.613536] virtio-pci 0000:00:04.0: no hotplug settings from platform
373[  179.614488] virtio-pci 0000:00:04.0: using default PCI settings
374[  179.617263] virtio-pci 0000:00:06.0: enabling device (0000 -> 0003)
375[  179.618321] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
376[  179.619077] virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
377[  179.620213] virtio-pci 0000:00:05.0: no hotplug settings from platform
378[  179.621019] virtio-pci 0000:00:05.0: using default PCI settings
379[  179.621777] virtio-pci 0000:00:06.0: no hotplug settings from platform
380[  179.622598] virtio-pci 0000:00:06.0: using default PCI settings
381[  179.623400] ------------[ cut here ]------------
382[  179.623967] WARNING: at /build/buildd-linux-2.6_2.6.32-41-amd64-ReqhZF/linux-2.6-2.6.32/debian/build/source_amd64_none/fs/sysfs/dir.c:491 sysfs_add_one+0xcc/0xe4()
383[  179.625721] Hardware name: KVM
384[  179.626133] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:06.0'
385[  179.627112] Modules linked in: acpiphp pci_hotplug joydev usbhid hid snd_pcm snd_timer snd i2c_piix4 soundcore snd_page_alloc processor button pcspkr psmouse virtio_balloon i2c_core evdev serio_raw ext2 mbcache dm_mod ata_generic ata_piix virtio_blk 8139too uhci_hcd ehci_hcd thermal libata floppy thermal_sys virtio_pci virtio_ring virtio 8139cp mii usbcore nls_base scsi_mod [last unloaded: scsi_wait_scan]
386[  179.631993] Pid: 17, comm: kacpi_notify Not tainted 2.6.32-5-amd64 #1
387[  179.632775] Call Trace:
388[  179.633089]  [<ffffffff8114033b>] ? sysfs_add_one+0xcc/0xe4
389[  179.633739]  [<ffffffff8114033b>] ? sysfs_add_one+0xcc/0xe4
390[  179.634410]  [<ffffffff8104df9c>] ? warn_slowpath_common+0x77/0xa3
391[  179.635144]  [<ffffffff8104e024>] ? warn_slowpath_fmt+0x51/0x59
392[  179.635813]  [<ffffffff81140267>] ? sysfs_pathname+0x35/0x3d
393[  179.636507]  [<ffffffff81140267>] ? sysfs_pathname+0x35/0x3d
394[  179.637185]  [<ffffffff81140267>] ? sysfs_pathname+0x35/0x3d
395[  179.637816]  [<ffffffff8114033b>] ? sysfs_add_one+0xcc/0xe4
396[  179.638487]  [<ffffffff811408b7>] ? create_dir+0x4f/0x7c
397[  179.639157]  [<ffffffff81140919>] ? sysfs_create_dir+0x35/0x4a
398[  179.639831]  [<ffffffff8118f97b>] ? kobject_get+0x12/0x17
399[  179.640508]  [<ffffffff8118fab1>] ? kobject_add_internal+0xcb/0x181
400[  179.641272]  [<ffffffff8118fd13>] ? kobject_add+0x74/0x7c
401[  179.641880]  [<ffffffff810e5f05>] ? virt_to_head_page+0x9/0x2a
402[  179.642577]  [<ffffffff811df36a>] ? acpi_evaluate_object+0x1db/0x1ec
403[  179.643333]  [<ffffffff8121f1a2>] ? device_add+0xce/0x537
404[  179.643944]  [<ffffffff81068740>] ? up+0xe/0x37
405[  179.644513]  [<ffffffff8119e0f5>] ? pci_bus_add_device+0x15/0x39
406[  179.645215]  [<ffffffff8119e143>] ? pci_bus_add_devices+0x2a/0x11e
407[  179.645935]  [<ffffffffa0252406>] ? enable_device+0x2f3/0x38a [acpiphp]
408[  179.646721]  [<ffffffffa02519c3>] ? acpiphp_enable_slot+0xb6/0x104 [acpiphp]
409[  179.647549]  [<ffffffffa0251a72>] ? acpiphp_check_bridge+0x61/0xc2 [acpiphp]
410[  179.648391]  [<ffffffffa0252051>] ? handle_hotplug_event_func+0xbe/0x165 [acpiphp]
411[  179.649272]  [<ffffffff811c8fec>] ? acpi_bus_get_device+0x1d/0x2e
412[  179.649971]  [<ffffffff811c9084>] ? acpi_bus_notify+0x43/0x79
413[  179.650658]  [<ffffffff811d5d0e>] ? acpi_ev_notify_dispatch+0x57/0x61
414[  179.651420]  [<ffffffff811c738b>] ? acpi_os_execute_deferred+0x21/0x2c
415[  179.652187]  [<ffffffff810619f7>] ? worker_thread+0x188/0x21d
416[  179.652856]  [<ffffffff811c736a>] ? acpi_os_execute_deferred+0x0/0x2c
417[  179.653619]  [<ffffffff8106502a>] ? autoremove_wake_function+0x0/0x2e
418[  179.654386]  [<ffffffff8106186f>] ? worker_thread+0x0/0x21d
419[  179.655014]  [<ffffffff81064d5d>] ? kthread+0x79/0x81
420[  179.655627]  [<ffffffff81011baa>] ? child_rip+0xa/0x20
421[  179.656249]  [<ffffffff81064ce4>] ? kthread+0x0/0x81
422[  179.656832]  [<ffffffff81011ba0>] ? child_rip+0x0/0x20
423[  179.657454] ---[ end trace 1e1f2d5053eed44a ]---
424[  179.657979] kobject_add_internal failed for 0000:00:06.0 with -EEXIST, don't try to register things with the same name in the same directory.
425[  179.659475] Pid: 17, comm: kacpi_notify Tainted: G        W  2.6.32-5-amd64 #1
426[  179.660321] Call Trace:
427[  179.660621]  [<ffffffff8118fb54>] ? kobject_add_internal+0x16e/0x181
428[  179.661379]  [<ffffffff8118fd13>] ? kobject_add+0x74/0x7c
429[  179.662009]  [<ffffffff810e5f05>] ? virt_to_head_page+0x9/0x2a
430[  179.662709]  [<ffffffff811df36a>] ? acpi_evaluate_object+0x1db/0x1ec
431[  179.663453]  [<ffffffff8121f1a2>] ? device_add+0xce/0x537
432[  179.664100]  [<ffffffff81068740>] ? up+0xe/0x37
433[  179.664651]  [<ffffffff8119e0f5>] ? pci_bus_add_device+0x15/0x39
434[  179.665368]  [<ffffffff8119e143>] ? pci_bus_add_devices+0x2a/0x11e
435[  179.666089]  [<ffffffffa0252406>] ? enable_device+0x2f3/0x38a [acpiphp]
436[  179.666867]  [<ffffffffa02519c3>] ? acpiphp_enable_slot+0xb6/0x104 [acpiphp]
437[  179.667700]  [<ffffffffa0251a72>] ? acpiphp_check_bridge+0x61/0xc2 [acpiphp]
438[  179.668527]  [<ffffffffa0252051>] ? handle_hotplug_event_func+0xbe/0x165 [acpiphp]
439[  179.669404]  [<ffffffff811c8fec>] ? acpi_bus_get_device+0x1d/0x2e
440[  179.670115]  [<ffffffff811c9084>] ? acpi_bus_notify+0x43/0x79
441[  179.670804]  [<ffffffff811d5d0e>] ? acpi_ev_notify_dispatch+0x57/0x61
442[  179.671553]  [<ffffffff811c738b>] ? acpi_os_execute_deferred+0x21/0x2c
443[  179.672334]  [<ffffffff810619f7>] ? worker_thread+0x188/0x21d
444[  179.673001]  [<ffffffff811c736a>] ? acpi_os_execute_deferred+0x0/0x2c
445[  179.673771]  [<ffffffff8106502a>] ? autoremove_wake_function+0x0/0x2e
446[  179.674522]  [<ffffffff8106186f>] ? worker_thread+0x0/0x21d
447[  179.675174]  [<ffffffff81064d5d>] ? kthread+0x79/0x81
448[  179.675778]  [<ffffffff81011baa>] ? child_rip+0xa/0x20
449[  179.676399]  [<ffffffff81064ce4>] ? kthread+0x0/0x81
450[  179.676981]  [<ffffffff81011ba0>] ? child_rip+0x0/0x20
451[  179.677586] virtio-pci 0000:00:06.0: Error adding device, continuing
452[  179.680099] virtio-pci 0000:00:06.0: setting latency timer to 64
453[  179.683794]   alloc irq_desc for 26 on node -1
454[  179.684014]   alloc kstat_irqs on node -1
455[  179.684863] virtio-pci 0000:00:06.0: irq 26 for MSI/MSI-X
456[  179.685504]   alloc irq_desc for 27 on node -1
457[  179.686021]   alloc kstat_irqs on node -1
458[  179.686515] virtio-pci 0000:00:06.0: irq 27 for MSI/MSI-X
459[  179.687151]   alloc irq_desc for 28 on node -1
460[  179.687666]   alloc kstat_irqs on node -1
461[  179.688171] virtio-pci 0000:00:06.0: irq 28 for MSI/MSI-X
462[  179.751186] ------------[ cut here ]------------
463[  179.751749] kernel BUG at /build/buildd-linux-2.6_2.6.32-41-amd64-ReqhZF/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/pci/bus.c:157!
464[  179.753282] invalid opcode: 0000 [#1] SMP
465[  179.753796] last sysfs file: /sys/module/virtio/initstate
466[  179.754450] CPU 0
467[  179.754701] Modules linked in: virtio_net(+) acpiphp pci_hotplug joydev usbhid hid snd_pcm snd_timer snd i2c_piix4 soundcore snd_page_alloc processor button pcspkr psmouse virtio_balloon i2c_core evdev serio_raw ext2 mbcache dm_mod ata_generic ata_piix virtio_blk 8139too uhci_hcd ehci_hcd thermal libata floppy thermal_sys virtio_pci virtio_ring virtio 8139cp mii usbcore nls_base scsi_mod [last unloaded: scsi_wait_scan]
468[  179.759624] Pid: 17, comm: kacpi_notify Tainted: G        W  2.6.32-5-amd64 #1 KVM
469[  179.760515] RIP: 0010:[<ffffffff8119e192>]  [<ffffffff8119e192>] pci_bus_add_devices+0x79/0x11e
470[  179.761556] RSP: 0018:ffff88003f21bcb0  EFLAGS: 00010246
471[  179.762164] RAX: ffff88003f21e428 RBX: 0000000000000000 RCX: 00000000000005d9
472[  179.763001] RDX: 0000000000000000 RSI: 0000000000000082 RDI: 0000000000000246
473[  179.763846] RBP: ffff88003ea2a000 R08: 00000000000071dd R09: ffffffff813b089a
474[  179.764703] R10: 0000000000000000 R11: ffffffff816cd8d0 R12: ffff88003f21e428
475[  179.765538] R13: ffff88003f21e428 R14: ffff88003d0b1840 R15: ffff88003d0b1850
476[  179.766382] FS:  0000000000000000(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
477[  179.767310] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
478[  179.767996] CR2: 0000000002244d98 CR3: 000000003f6a6000 CR4: 00000000000006f0
479[  179.768858] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
480[  179.769709] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
481[  179.770541] Process kacpi_notify (pid: 17, threadinfo ffff88003f21a000, task ffff88003f1ff170)
482[  179.771567] Stack:
483[  179.771817]  ffff88003d0b1850 ffff88003d0b1840 ffff88003f21e428 ffff88003f21e400
484[  179.772735] <0> ffff88003d0b1850 ffffffffa0252406 ffff88003f21e428 ffff88003f21bd0c
485[  179.773700] <0> ffff88003f007800 ffff88003c984000 ffff88003f0134a0 ffff88003ead5c00
486[  179.774696] Call Trace:
487[  179.774985]  [<ffffffffa0252406>] ? enable_device+0x2f3/0x38a [acpiphp]
488[  179.775771]  [<ffffffffa02519c3>] ? acpiphp_enable_slot+0xb6/0x104 [acpiphp]
489[  179.776603]  [<ffffffffa0251a72>] ? acpiphp_check_bridge+0x61/0xc2 [acpiphp]
490[  179.777422]  [<ffffffffa0252051>] ? handle_hotplug_event_func+0xbe/0x165 [acpiphp]
491[  179.778316]  [<ffffffff811c8fec>] ? acpi_bus_get_device+0x1d/0x2e
492[  179.779041]  [<ffffffff811c9084>] ? acpi_bus_notify+0x43/0x79
493[  179.779715]  [<ffffffff811d5d0e>] ? acpi_ev_notify_dispatch+0x57/0x61
494[  179.780478]  [<ffffffff811c738b>] ? acpi_os_execute_deferred+0x21/0x2c
495[  179.781264]  [<ffffffff810619f7>] ? worker_thread+0x188/0x21d
496[  179.781945]  [<ffffffff811c736a>] ? acpi_os_execute_deferred+0x0/0x2c
497[  179.782728]  [<ffffffff8106502a>] ? autoremove_wake_function+0x0/0x2e
498[  179.783476]  [<ffffffff8106186f>] ? worker_thread+0x0/0x21d
499[  179.784198]  [<ffffffff81064d5d>] ? kthread+0x79/0x81
500[  179.784797]  [<ffffffff81011baa>] ? child_rip+0xa/0x20
501[  179.785403]  [<ffffffff81064ce4>] ? kthread+0x0/0x81
502[  179.786005]  [<ffffffff81011ba0>] ? child_rip+0x0/0x20
503[  179.786608] Code: 3d 81 31 c0 e8 34 cd 15 00 4d 8b 24 24 49 8b 04 24 4d 39 ec 0f 18 08 75 b0 48 8b 6d 28 e9 95 00 00 00 f6 85 88 06 00 00 04 75 04 <0f> 0b eb fe 48 8b 5d 18 48 85 db 74 7b 48 39 1b 75 32 48 c7 c7
504[  179.789718] RIP  [<ffffffff8119e192>] pci_bus_add_devices+0x79/0x11e
505[  179.790472]  RSP <ffff88003f21bcb0>
506[  179.790892] ---[ end trace 1e1f2d5053eed44b ]---
507[  200.724072] eth1: no IPv6 routers present
508