269 | | Fig 1-2a) System Configuration with Three Servers [[BR]] |
| 269 | A full WiMAX testbed system configuration utilizes three servers, per Figure 1-2a): [[BR]] |
| 270 | ASNGW-C, that provides combined ASN GW functions, and includes a CLICK router. [[BR]] |
| 271 | ASNGW-V, that provides virtualized ASN GW functions, for separate slices, with one VM assigned to each slice. [[BR]] |
| 272 | OMF, that provides a full set of OMF/OML functions. [[BR]] |
| 273 | |
| 274 | All servers run ubuntu Linux, and the ASNGW-V server implements kvm virtualization. [[BR]] |
| 275 | |
| 276 | Fig 1-2a) WiMAX Testbed System Configuration with Three Servers [[BR]] |
272 | | Figure 1-2a) shows the system configuration with three servers: [[BR]] |
273 | | ASNGW-03, that provides combined ASN GW functions. [[BR]] |
274 | | ASNGW-02, that provides virtualized ASN GW functions, for separate slices. [[BR]] |
275 | | OMF-04, that provides a set of OMF/OML functions. [[BR]] |
276 | | |
277 | | In some cases, a campus already has a set of OMF/OML functions, and would likely not require the OMF-04 server:[[BR]] |
| 279 | In some cases, it should be possible to combine the ASNGW functions into one server, for a WiMAX testbed system configuration that utilizes two servers, per Figure 1-2b). [[BR]] |
| 280 | ASNGW, that provides all ASN GW functions |
| 281 | OMF, that provides a full set of OMF/OML functions. [[BR]] |
| 282 | |
| 283 | Both servers run ubuntu Linux, and the ASNGW server implements kvm virtualization, with the combined ASN GW functions (non-virtualized) running in Dom0. [[BR]] |
| 284 | |
| 285 | In some cases, a campus already has a set of OMF/OML functions, and would likely not require the OMF server:[[BR]] |
| 294 | Finally, in many cases, it should be possible to combine all funtions within one server, for a WiMAX testbed system configuration that utilizes one server, per Figure 1-2c). [[BR]] |
| 295 | ASNGW_OMF that provides all ASN GW and OMF/OML functions. [[BR]] |
| 296 | |
| 297 | This server runs ubuntu Linux, and implements kvm virtualization, with the combined ASN GW (non-virtualized) and OMF/OML functions running in Dom0. Note that this server must have a total of four ethernet ports to provide all of the requirted conenctivity. [[BR]] |
| 298 | |
| 299 | When this configuration uses a high-capacity (i.e., dual-CPU) server, it should have sufficient capacity for most installations. Thus, it is the configuration that will be used for the initila installations at all campuses/sites. [[BR]] |
| 300 | |
| 301 | Later, additonal servers can be added as necessary for capacity. For example, if specialized functions such as video coding were included in a slice's VM, then additional capacity may be required.[[BR]] |
| 302 | |
| 303 | Fig 1-2c) WiMAX Tetsbed System Configuration with One Server [[BR]] |
| 304 | [[Image(Visio-111309b_WiMAXSystemOverview_Page_2.jpg, 90%)]] [[BR]] |