Changes between Version 24 and Version 25 of WiMAXInteg/CampusInstallation

Timestamp:

12/01/09 10:47:34 (14 years ago)

Author:

hmussman@bbn.com

Comment:

--

WiMAXInteg/CampusInstallation

@@ -63 +63 @@
  * High, to maximize range.  Since throughput and coverage of WiMAX systems are highly influenced by the antenna location, care should be taken that the antenna is mounted so that siginificant portion of First Fresnel Zone is clear of obstructions.  Ideally the antenna is mounted on the elevated structure providing clear line of sight to most of the intended coverage area. 
 
- * Capable of safely and securely supporting a pole that mounts antenna and Base Station Outdoor Unit.  See Appendix 6 of [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
+ * Capable of safely and securely supporting a pole that mounts antenna and Base Station Outdoor Unit.  See Sections 6.1 and 6.6 of the [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
 
  * Access to building ground, for lightning protection, using a heavy ground cable. 
@@ -69 +69 @@
  * Access to Indoor Equipment Room, for power and fiber (signal) cables.  The use of a conduit is preferred, but otherwise the fiber (signal) cables must be mechanically protected.
 
- * Secure access, to prevent unauthorized people from disrupting operation, or receiving unhealthy electromagnetic exposure.
+ * Secure access, to prevent unauthorized people from disrupting operation, or receiving unhealthy electromagnetic exposure.  Section 1.7 of the [attachment:BS_INSTALLATION.pdf NEC Installation Manual for Base Station (IMN:BS)]
+
 
 NOTE:  It is suggested that this process be started IMMEDIATELY, to assure that an appropriate outdoor site can be identifed.