Changes between Version 4 and Version 5 of WiMAX/WiMAX-Tutorial/Dash/04

Timestamp:

07/21/13 12:28:39 (11 years ago)

Author:

cbn228@nyu.edu

Comment:

--

WiMAX/WiMAX-Tutorial/Dash/04

@@ -35 +35 @@
 > Tip: If any node doesn't seem to be checking in, e.g. you see output like this: [[br]]
 > [[br]]
-> {{{INFO stdlib: Waiting for nodes (Up/Down/Total): 2/1/3 - (still down: node1-5.sb4.orbit-lab.org) [140 sec.]}}}  [[br]]
+> {{{INFO stdlib: Waiting for nodes (Up/Down/Total): 2/1/3 - (still down: node1-5.outdoor.orbit-lab.org) [140 sec.]}}}  [[br]]
 > [[br]]
 > try opening another SSH session to the outdoor console and resetting the misbehaving node: [[br]]
@@ -43 +43 @@
 == Clearing Experiment Settings ==
 
-In addition to loading a fresh disk image, additional steps must be taken to restore the wireless environment to its default state. These commands are run from the console on Sandbox 4 to
+In addition to loading a fresh disk image, additional steps must be taken to restore the wireless environment to its default state. These commands are run from the console on Outdoor to
 reset all of the base station and attenuation settings: