[[PageOutline]]

Here are the details of [wiki:PlasticSlices/BaselineEvaluation#Baseline3 Baseline 3], divided by slice.

In this baseline, we ran six rounds of experiments, one per day; except that too many things were down on the second day, so we ran two on the last day. In rounds 1 through 5, we ran all ten experiments simultaneously; in round 6, we ran them sequentially.

The Stanford FlowVisor was suffering from significant instabilities during this baseline. We were originally planning to use of-planet3.stanford.edu and of-planet4.stanford.edu in three experiments, but those plnodes were VMs, and were frequently unreachable. We switched to using of-planet1 and ofplanet2, which are on dedicated hardware, for round 1, but the FlowVisor problems also left them unreachable too much of the time, so we dropped the Stanford plnodes from this baseline entirely for rounds 2 - 6. The tables of client/server pairs are for rounds 2 - 6.

= plastic-101 =

[PlasticSlices/Experiments#GigaPing GigaPing], using count=100000, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| ganel.gpolab.bbn.com           || planetlab5.clemson.edu         || server=10.42.101.105 ||
|| planetlab4.clemson.edu         || plnode2.cip.gatech.edu         || server=10.42.101.101 ||
|| plnode1.cip.gatech.edu         || pl5.myplc.grnoc.iu.edu         || server=10.42.101.73  ||
|| pl4.myplc.grnoc.iu.edu         || orbitplc2.orbit-lab.org        || server=10.42.101.112 ||
|| orbitplc1.orbit-lab.org        || pl02.cs.washington.edu         || server=10.42.101.81  ||
|| pl01.cs.washington.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.101.96  ||
|| wings-openflow-2.wail.wisc.edu || gardil.gpolab.bbn.com          || server=10.42.101.52  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
}}}

== Round 1 ==

=== Results ===

ganel.gpolab.bbn.com:

{{{
--- 10.42.101.105 ping statistics ---
100000 packets transmitted, 99979 received, 0% packet loss, time 768419ms
rtt min/avg/max/mdev = 59.355/59.580/604.942/7.380 ms, pipe 71
}}}

planetlab4.clemson.edu:

{{{
+$ server=10.42.101.101

+$ sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
write failed: Broken pipe
}}}

plnode1.cip.gatech.edu:

{{{
+$ server=10.42.101.73

+$ sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
write failed: Broken pipe
}}}

pl4.myplc.grnoc.iu.edu:

{{{
--- 10.42.101.112 ping statistics ---
100000 packets transmitted, 0 received, 100% packet loss, time 1009280ms
}}}

orbitplc1.orbit-lab.org:

{{{
--- 10.42.101.91 ping statistics ---
100000 packets transmitted, 0 received, 100% packet loss, time 1099200ms
}}}

of-planet1.stanford.edu:

{{{
--- 10.42.101.81 ping statistics ---
100000 packets transmitted, 88364 received, 11% packet loss, time 787022ms
rtt min/avg/max/mdev = 152.667/206.759/24389.256/963.374 ms, pipe 3866
}}}

pl01.cs.washington.edu:

{{{
--- 10.42.101.96 ping statistics ---
100000 packets transmitted, 66226 received, 33% packet loss, time 854819ms
rtt min/avg/max/mdev = 59.682/70.918/1729.623/93.323 ms, pipe 166
}}}

wings-openflow-2.wail.wisc.edu:

{{{
--- 10.42.101.52 ping statistics --- 
100000 packets transmitted, 95409 received, 4% packet loss, time 892338ms 
rtt min/avg/max/mdev = 29.549/29.626/330.938/3.001 ms, pipe 36 
}}}

=== Analysis ===

Many things were down here: Clemson couldn't ping GT, GT couldn't ping Indiana, Indiana couldn't ping Rutgers, Rutgers couldn't ping Stanford. Stanford could ping Washington, but with noticeable packet loss. Similarly, washington could ping Wisconsin, with substantial packet loss. And Wisconsin to BBN also showed noticeable packet loss. Only BBN - Clemson worked as expected.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-102 =

[PlasticSlices/Experiments#GigaPing GigaPing], using count=100000, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| sardis.gpolab.bbn.com          || planetlab4.clemson.edu         || server=10.42.102.104 ||
|| planetlab5.clemson.edu         || plnode1.cip.gatech.edu         || server=10.42.102.100 ||
|| plnode2.cip.gatech.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.102.72  ||
|| pl5.myplc.grnoc.iu.edu         || orbitplc1.orbit-lab.org        || server=10.42.102.111 ||
|| orbitplc2.orbit-lab.org        || pl01.cs.washington.edu         || server=10.42.102.80  ||
|| pl02.cs.washington.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.102.95  ||
|| wings-openflow-3.wail.wisc.edu || bain.gpolab.bbn.com            || server=10.42.102.54  ||

== Commands run on each client ==

{{{
server=<ipaddr>
sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
}}}

== Results ==

== Round 1 ==

sardis.gpolab.bbn.com:

{{{
--- 10.42.102.104 ping statistics ---
100000 packets transmitted, 99817 received, 0% packet loss, time 800241ms
rtt min/avg/max/mdev = 164.715/165.578/1646.129/27.737 ms, pipe 179
}}}

planetlab5.clemson.edu:

{{{
+$ server=10.42.102.100

+$ sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
write failed: Broken pipe
}}}

plnode2.cip.gatech.edu:

{{{
+$ server=10.42.102.72

+$ sudo ping -i .001 -s $((1500-8-20)) -c 100000 $server
write failed: Broken pipe
}}}

pl5.myplc.grnoc.iu.edu:

{{{
--- 10.42.102.111 ping statistics ---
100000 packets transmitted, 0 received, 100% packet loss, time 1005458ms
}}}

orbitplc2.orbit-lab.org:

{{{
--- 10.42.102.91 ping statistics ---
100000 packets transmitted, 0 received, 100% packet loss, time 1098507ms
}}}

of-planet1.stanford.edu:

{{{
--- 10.42.102.80 ping statistics ---
100000 packets transmitted, 95045 received, 4% packet loss, time 759672ms
rtt min/avg/max/mdev = 20.055/38.484/18150.472/522.726 ms, pipe 2243
}}}

pl02.cs.washington.edu:

{{{
--- 10.42.102.95 ping statistics ---
100000 packets transmitted, 68156 received, 31% packet loss, time 861675ms
rtt min/avg/max/mdev = 59.674/76.396/2832.148/112.947 ms, pipe 262
}}}

wings-openflow-3.wail.wisc.edu:

{{{
--- 10.42.102.54 ping statistics ---
100000 packets transmitted, 92299 received, 7% packet loss, time 829997ms
rtt min/avg/max/mdev = 29.549/29.679/438.234/4.634 ms, pipe 38
}}}

=== Analysis ===

As with plastic-101, many things didn't work well here. BBN - Clemson was ok, but everything else either failed outright or had noticeable packet loss.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-103 =

[PlasticSlices/Experiments#GigaPerfTCP GigaPerf TCP], using port=5103, size=350, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| pl02.cs.washington.edu         || navis.gpolab.bbn.com           || server=10.42.103.55  ||
|| ganel.gpolab.bbn.com           || orbitplc1.orbit-lab.org        || server=10.42.103.111 ||
|| orbitplc2.orbit-lab.org        || pl01.cs.washington.edu         || server=10.42.103.80  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5103 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5103 -n 350M
}}}

== Round 1 ==

=== Results ===

of-planet1.stanford.edu:

{{{
+$ server=10.42.103.55  

+$ nice -n 19 iperf -c $server -p 5103 -n 250M 
connect failed: Connection timed out 
}}}

ganel.gpolab.bbn.com:

{{{
+$ server=10.42.103.111  

+$ nice -n 19 iperf -c $server -p 5103 -n 250M 
connect failed: Connection timed out
write1 failed: Broken pipe
write2 failed: Broken pipe
------------------------------------------------------------
Client connecting to 10.42.103.111, TCP port 5103
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 0.0.0.0 port 44169 connected with 10.42.103.111 port 5103
[  3]  0.0- 0.0 sec  0.00 Bytes  0.00 bits/sec
}}}

orbitplc2.orbit-lab.org:

{{{
+$ server=10.42.103.80  

+$ nice -n 19 iperf -c $server -p 5103 -n 250M 
connect failed: Connection timed out
write1 failed: Broken pipe
write2 failed: Broken pipe
------------------------------------------------------------
Client connecting to 10.42.103.80, TCP port 5103
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 0.0.0.0 port 40359 connected with 10.42.103.80 port 5103
[  3]  0.0- 0.0 sec  0.00 Bytes  0.00 bits/sec
}}}

pl02.cs.washington.edu:

{{{
+$ server=10.42.103.91  
 
+$ nice -n 19 iperf -c $server -p 5103 -n 250M 
connect failed: Connection timed out 
}}}

=== Analysis ===

Everything failed here... Stanford couldn't even connect to BBN. BBN got a couple of failures trying to connect to Rutgers, then got through, but then couldn't transfer any data. Ditto Rutgers to Washington; and then Washington couldn't even connect to Stanford.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-104 =

[PlasticSlices/Experiments#GigaPerfUDP GigaPerf UDP], using port=5104, size=500, rate=100, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab4.clemson.edu         || gardil.gpolab.bbn.com          || server=10.42.104.52 ||
|| planetlab5.clemson.edu         || orbitplc2.orbit-lab.org        || server=10.42.104.112 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5104 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5104 -n 500M -b 100M
}}}

== Round 1 ==

=== Results ===

planetlab4.clemson.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.104.52, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:  109 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.104 port 56957 connected with 10.42.104.52 port 5104
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-41.8 sec   500 MBytes   100 Mbits/sec
[  3] Sent 356659 datagrams
[  3] Server Report:
[  3]  0.0-40.3 sec   480 MBytes  99.7 Mbits/sec   0.048 ms 14467/356658 (4.1%)
[  3]  0.0-40.3 sec  177 datagrams received out-of-order
}}}

planetlab5.clemson.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.104.112, UDP port 5104
Sending 1470 byte datagrams
UDP buffer size:  109 KByte (default)
------------------------------------------------------------
[  3] local 10.42.104.105 port 39103 connected with 10.42.104.112 port 5104
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-41.8 sec   500 MBytes   100 Mbits/sec
[  3] Sent 356659 datagrams
[  3] WARNING: did not receive ack of last datagram after 10 tries.
}}}

=== Analysis ===

Clemson to BBN got nearly 100 Mbits/sec, and with a fairly good success rate for UDP. Clemson to GT didn't work at all -- there's no "Server Report" section because the client never made contact with the server.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-105 =

[PlasticSlices/Experiments#GigaPerfTCP GigaPerf TCP], using port=5105, size=250, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-2.wail.wisc.edu || planetlab5.clemson.edu         || server=10.42.105.105 ||
|| planetlab4.clemson.edu         || sardis.gpolab.bbn.com          || server=10.42.105.53  ||
|| bain.gpolab.bbn.com            || plnode2.cip.gatech.edu         || server=10.42.105.101 ||
|| plnode1.cip.gatech.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.105.96  ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -B $server -p 5105 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -c $server -p 5105 -n 250M
}}}

== Round 1 ==

=== Results ===

wings-openflow-2.wail.wisc.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.105.105, TCP port 5105
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 10.42.105.95 port 36006 connected with 10.42.105.105 port 5105
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-220.5 sec   250 MBytes  9.51 Mbits/sec
}}}

planetlab4.clemson.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.105.53, TCP port 5105
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 10.42.105.104 port 35513 connected with 10.42.105.53 port 5105
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-278.9 sec   250 MBytes  7.52 Mbits/sec
}}}

bain.gpolab.bbn.com:

{{{
------------------------------------------------------------
Client connecting to 10.42.105.101, TCP port 5105
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 10.42.105.54 port 56129 connected with 10.42.105.101 port 5105
[  3]  0.0-702.1 sec    250 MBytes  2.99 Mbits/sec
}}}

plnode1.cip.gatech.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.105.96, TCP port 5105
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 10.42.105.100 port 40317 connected with 10.42.105.96 port 5105
[  3]  0.0-355.5 sec    250 MBytes  5.90 Mbits/sec
}}}

=== Analysis ===

All results seem consistent with what we'd expect. (Which is itself somewhat unexpected at this point.)

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-106 =

[PlasticSlices/Experiments#GigaPerfUDP GigaPerf UDP], using port=5106, size=500, rate=100, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.106.95  ||
|| wings-openflow-3.wail.wisc.edu || plnode1.cip.gatech.edu         || server=10.42.106.100 ||

== One-time prep commands run on each client and server ==

{{{
sudo yum -y install iperf
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -B $server -p 5106 -s -i 1
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
nice -n 19 iperf -u -c $server -p 5106 -n 500M -b 100M
}}}

== Round 1 ==

=== Results ===

planetlab5.clemson.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.106.95, UDP port 5106
Sending 1470 byte datagrams
UDP buffer size:  109 KByte (default)
------------------------------------------------------------
[  3] local 10.42.106.105 port 46561 connected with 10.42.106.95 port 5106
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-41.8 sec   500 MBytes   100 Mbits/sec
[  3] Sent 356659 datagrams
[  3] WARNING: did not receive ack of last datagram after 10 tries.
}}}

wings-openflow-3.wail.wisc.edu:

{{{
------------------------------------------------------------
Client connecting to 10.42.106.100, UDP port 5106
Sending 1470 byte datagrams
UDP buffer size:  109 KByte (default)
------------------------------------------------------------
[  3] local 10.42.106.96 port 43047 connected with 10.42.106.100 port 5106
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-41.7 sec   500 MBytes   100 Mbits/sec
[  3] Sent 356659 datagrams
[  3] Server Report:
[  3]  0.0-40.8 sec   464 MBytes  95.5 Mbits/sec   0.131 ms 25488/356658 (7.1%)
[  3]  0.0-40.8 sec  210 datagrams received out-of-order
}}}

plnode2.cip.gatech.edu:

{{{{
------------------------------------------------------------
Client connecting to 10.42.106.104, UDP port 5106
Sending 1470 byte datagrams
UDP buffer size:   122 KByte (default)
------------------------------------------------------------
[  3] local 10.42.106.101 port 33743 connected with 10.42.106.104 port 5106
[  3]  0.0-1482.0 sec  17.2 GBytes  99.8 Mbits/sec
[  3] Sent 12572788 datagrams
[  3] Server Report:
[  3]  0.0-1481.8 sec  16.1 GBytes  93.2 Mbits/sec  0.138 ms 833663/12572787 (6.6%)
[  3]  0.0-1481.8 sec  223 datagrams received out-of-order 
}}}

=== Analysis ===

Clemson to Wisconsin has no Server Report section, but looking at the server-side log (not quoted here), it looks like the expected amount of data was actually transfered. Wisconsin to GT looks good. GT to Clemson is also good, except that it ran for nearly half an hour due to a bug in the version of iperf that comes with Fedora 8, which causes it not to exit when run as a UDP client.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-107 =

[PlasticSlices/Experiments#GigaWeb GigaWeb], using count=30, port=4107, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| planetlab5.clemson.edu         || pl4.myplc.grnoc.iu.edu         || server=10.42.107.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode2.cip.gatech.edu         || server=10.42.107.101 ||
|| plnode1.cip.gatech.edu         || pl02.cs.washington.edu         || server=10.42.107.81  ||
|| pl01.cs.washington.edu         || planetlab4.clemson.edu         || server=10.42.107.104 ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4107
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
for i in {1..30} ; do wget --no-check-certificate https://$server:4107/substrate.doc -O substrate.doc.$i ; done
du -sb .
md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
}}}

== Round 1 ==

=== Results ===

planetlab5.clemson.edu:

{{{
+$ du -sb .
254626816	.

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match." 
All checksums match. 
}}}

pl5.myplc.grnoc.iu.edu:

{{{
+$ du -sb .
254626816       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

plnode1.cip.gatech.edu:

{{{
+$ du -sb .
254626816       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

pl01.cs.washington.edu:

{{{
+$ du -sb .
254626816       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

=== Analysis ===

All results seem consistent with what we'd expect.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-108 =

[PlasticSlices/Experiments#GigaWeb GigaWeb], using count=40, port=4108, file=substrate.doc, md5sum=d4fcf71833327fbfef98be09deef8bfb, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| wings-openflow-3.wail.wisc.edu || orbitplc1.orbit-lab.org        || server=10.42.108.111 ||
|| orbitplc2.orbit-lab.org        || pl5.myplc.grnoc.iu.edu         || server=10.42.108.73  ||
|| pl4.myplc.grnoc.iu.edu         || wings-openflow-2.wail.wisc.edu || server=10.42.108.95  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install pyOpenSSL patch
rm -rf ~/gigaweb
mkdir -p ~/gigaweb/docroot

cd ~/gigaweb
wget http://code.activestate.com/recipes/442473-simple-http-server-supporting-ssl-secure-communica/download/1/ -O httpsd.py
wget http://groups.geni.net/geni/attachment/wiki/PlasticSlices/Experiments/httpsd.py.patch?format=raw -O httpsd.py.patch
patch httpsd.py httpsd.py.patch
rm httpsd.py.patch

cd ~/gigaweb/docroot
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc

cd ~/gigaweb
openssl genrsa -passout pass:localhost -des3 -rand /dev/urandom -out localhost.localdomain.key 1024
openssl req -subj /CN=localhost.localdomain -passin pass:localhost -new -key localhost.localdomain.key -out localhost.localdomain.csr
openssl x509 -passin pass:localhost -req -days 3650 -in localhost.localdomain.csr -signkey localhost.localdomain.key -out localhost.localdomain.crt
openssl rsa -passin pass:localhost -in localhost.localdomain.key -out decrypted.localhost.localdomain.key
mv -f decrypted.localhost.localdomain.key localhost.localdomain.key
cat localhost.localdomain.key localhost.localdomain.crt > localhost.localdomain.pem
rm localhost.localdomain.key localhost.localdomain.crt localhost.localdomain.csr
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/gigaweb/docroot
python ../httpsd.py $server 4108
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
rm -rf ~/gigaweb
mkdir ~/gigaweb
cd ~/gigaweb
for i in {1..40} ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc.$i ; done
du -sb .
md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
}}}

== Round 1 ==

=== Results ===

wings-openflow-3.wail.wisc.edu:

{{{
+$ server=10.42.108.90 

+$ for i in {1..30} ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc.$i ; done
--2011-05-26 17:25:36--  https://10.42.108.90:4108/substrate.doc
Connecting to 10.42.108.90:4108... connected.
^C
}}}

of-planet2.stanford.edu:

{{{
+$ server=10.42.108.111 

+$ for i in {1..30} ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc.$i ; done
--2011-05-26 17:25:28--  https://10.42.108.111:4108/substrate.doc
Connecting to 10.42.108.111:4108... failed: Connection timed out.
}}}

orbitplc2.orbit-lab.org:

{{{
+$ server=10.42.108.73 

+$ for i in {1..30} ; do wget --no-check-certificate https://$server:4108/substrate.doc -O substrate.doc.$i ; done
--2011-05-26 13:22:22--  https://10.42.108.73:4108/substrate.doc
Connecting to 10.42.108.73:4108... failed: Connection timed out.
}}}

pl4.myplc.grnoc.iu.edu:

{{{
+$ du -sb .
254626816       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

=== Analysis ===

Everything failed except Indiana to Wisconsin, but that one worked well.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-109 =

[PlasticSlices/Experiments#GigaNetcat GigaNetcat], using count=25, port=6109, file=substrate.doc, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| navis.gpolab.bbn.com           || pl5.myplc.grnoc.iu.edu         || server=10.42.109.73  ||
|| pl4.myplc.grnoc.iu.edu         || pl02.cs.washington.edu         || server=10.42.109.81  ||
|| pl01.cs.washington.edu         || planetlab5.clemson.edu         || server=10.42.109.105 ||
|| planetlab4.clemson.edu         || wings-openflow-3.wail.wisc.edu || server=10.42.109.96  ||
|| wings-openflow-2.wail.wisc.edu || ganel.gpolab.bbn.com           || server=10.42.109.51  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
for i in {1..25} ; do nc -l $server 6109 < substrate.doc ; echo "completed transfer #$i" ; md5sum substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
for i in {1..25} ; do nc $server 6109 > substrate.doc ; echo "completed transfer #$i" ; md5sum substrate.doc ; mv substrate.doc substrate.doc.$i ; done
du -sb .
md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
}}}

== Round 1 ==

=== Results ===

navis.gpolab.bbn.com:

{{{
+$ du -sb .
169752576       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

pl4.myplc.grnoc.iu.edu:

{{{
+$ du -sb .
169752576       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

pl01.cs.washington.edu:

{{{
+$ du -sb .
4096    .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.1
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.10
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.11
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.12
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.13
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.14
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.15
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.16
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.17
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.18
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.19
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.2
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.20
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.3
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.4
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.5
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.6
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.7
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.8
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.9
}}}

planetlab4.clemson.edu:

{{{
+$ du -sb .
5544    .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
cd78ddbe122d455a37e47204d21a93d2  substrate.doc
}}}

of-planet2.stanford.edu:

{{{
+$ du -sb .
8491520	.

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
d41d8cd98f00b204e9800998ecf8427e  substrate.doc
}}}

wings-openflow-2.wail.wisc.edu:

{{{
+$ for i in {1..20} ; do nc $server 6109 > substrate.doc ; echo "completed transfer #$i" ; md5sum substrate.doc ; mv substrate.doc substrate.doc.$i ; done
completed transfer #1
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #2
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #3
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #4
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #5
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #6
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #7
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #8
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #9
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #10
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #11
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #12
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #13
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #14
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #15
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #16
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #17
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #18
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #19
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
completed transfer #20
d4fcf71833327fbfef98be09deef8bfb  substrate.doc
}}}

=== Analysis ===

Washington to Clemson failed because Clemson didn't actually have the file to serve, so it quickly sent twenty zero-length files. Clemson to Stanford just failed. Stanford to Wisconsin died partway through the first transfer. Wisconsin to BBN worked fine, but we didn't capture the du and md5sum output, so we've listed the transfer log here.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''

= plastic-110 =

[PlasticSlices/Experiments#GigaNetcat GigaNetcat], using count=25, port=6110, file=substrate.doc, and this table of client/server pairs:

|| '''client'''                   || '''server'''                   || '''server address''' ||
|| gardil.gpolab.bbn.com          || pl01.cs.washington.edu         || server=10.42.110.80  ||
|| pl02.cs.washington.edu         || orbitplc2.orbit-lab.org        || server=10.42.110.112 ||
|| orbitplc1.orbit-lab.org        || pl4.myplc.grnoc.iu.edu         || server=10.42.110.72  ||
|| pl5.myplc.grnoc.iu.edu         || plnode1.cip.gatech.edu         || server=10.42.110.100 ||
|| plnode2.cip.gatech.edu         || sardis.gpolab.bbn.com          || server=10.42.110.53  ||

== One-time prep commands run on each server ==

{{{
sudo yum -y install nc
mkdir -p ~/giganetcat
cd ~/giganetcat
wget http://groups.geni.net/geni/attachment/wiki/DeliverablePage/Spiral1%20substrate%20catalog.doc?format=raw -O substrate.doc
}}}

== One-time prep commands run on each client ==

{{{
sudo yum -y install nc
}}}

== Commands run on each server ==

{{{
server=<ipaddr>
cd ~/giganetcat
for i in {1..25} ; do nc -l $server 6110 < substrate.doc ; echo "completed transfer #$i" ; md5sum substrate.doc ; done
}}}

== Commands run on each client ==

{{{
server=<ipaddr>
rm -rf ~/giganetcat
mkdir ~/giganetcat
cd ~/giganetcat
for i in {1..25} ; do nc $server 6110 > substrate.doc ; echo "completed transfer #$i" ; md5sum substrate.doc ; mv substrate.doc substrate.doc.$i ; done
du -sb .
md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
}}}

== Round 1 ==

=== Results ===

gardil.gpolab.bbn.com:

{{{
+$ du -sb .
169752576       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

pl02.cs.washington.edu:

{{{
+$ du -sb .
8495016 .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
2c43a5dd0efdeb2ce92381d245ec0081  substrate.doc
}}}

of-planet2.stanford.edu:

{{{
+$ du -sb .
4096    .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
d41d8cd98f00b204e9800998ecf8427e  substrate.doc
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.1
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.10
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.11
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.2
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.3
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.4
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.5
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.6
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.7
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.8
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.9
}}}

orbitplc1.orbit-lab.org:

{{{
+$ du -sb .
4096    .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
d41d8cd98f00b204e9800998ecf8427e  substrate.doc
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.1
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.10
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.11
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.2
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.3
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.4
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.5
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.6
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.7
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.8
d41d8cd98f00b204e9800998ecf8427e  substrate.doc.9
}}}

pl5.myplc.grnoc.iu.edu:

{{{
+$ du -sb .
169752576       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

plnode2.cip.gatech.edu:

{{{
+$ du -sb .
169752576       .

+$ md5sum * | grep -v d4fcf71833327fbfef98be09deef8bfb || echo "All checksums match."
All checksums match.
}}}

=== Analysis ===

BBN to Washington worked fine, but Washington to Stanford died during the second transfer. Stanford to Rutgers didn't work at all.

== Round 2 ==

''To be added once the baseline finishes.''

== Round 3 ==

''To be added once the baseline finishes.''

== Round 4 ==

''To be added once the baseline finishes.''

== Round 5 ==

''To be added once the baseline finishes.''

== Round 6 ==

''To be added once the baseline finishes.''