Changes between Version 10 and Version 11 of PathControllerDemo


Ignore:
Timestamp:
10/21/12 01:32:16 (12 years ago)
Author:
carpenter@vis.uky.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • PathControllerDemo

    v10 v11  
    2626This window has some brief information about the node or link that the cursor is currently over. This case has information about '''VM-1'''. The icon represents a virtual machine. The hostname is pcvm63-2.uky.emulab.net.
    2727
    28 [[Image(info_window_vm1.png)]]
     28[[Image(info_window_vm1.png, 200)]]
    2929
    3030This next case is for '''lan1'''. The icon represents a link. The ids are displayed for the two end points, along with each interface's ip address.
    3131
    32 [[Image(info_window_lan1.png)]]
     32[[Image(info_window_lan1.png, 200)]]
    3333
    3434== Create Traffic ==
     
    3737Click the button to add a Traffic Generator.
    3838
    39 [[Image(new_generator.png)]]
     39[[Image(new_generator.png, 200)]]
    4040
    4141The Traffic Generator has a traffic source (Src) node and destination (Dst) node, both of which must be set. The File Size defaults to 500MB and can be anything from 1 to 1000MB. To set the Src or Dst, left click on the desired node. Once the node is highlighted, click on the [[Image(set_src_button.png)]] or [[Image(set_dst_button.png)]] to set your choice.
     
    5050*see traffic on lan1
    5151=== Switch to Path Controller ===
    52 The Traffic Path window allows you to add custom routes to the slice. The [[Image(add_path_button.png)]] button adds a new path based on the links that are selected in the topology window. The [[Image(reset_all_paths_button.png)]] button will reset the slice back to its default routes.
     52The Traffic Path window allows you to add custom routes to the slice.
    5353
    54 [[Image(path_window.png)]]
     54[[Image(path_window.png, 200)]]
     55
     56The [[Image(add_path_button.png)]] button adds a new path based on the links that are selected in the topology window. The [[Image(reset_all_paths_button.png)]] button will reset the slice back to its default routes.
     57
     58
    5559As we saw earlier, the default route between '''VM-1''' and '''VM-4''' follows the direct route via '''lan1'''. No we will alter that route.
    5660Set the path from '''VM-1''' to '''VM-4''' to follow links '''lan3''', '''lan5''', '''lan4'''.  Do this by left clicking on the links while holding the shift key. Once the three links are selected, click the [[Image(add_path_button.png)]] button. The results should look like this: