Changes between Version 21 and Version 22 of OpenFlow/Slicer/TestPlan

Timestamp:

11/14/14 10:53:37 (9 years ago)

Author:

tupty@bbn.com

Comment:

--

OpenFlow/Slicer/TestPlan

@@ -81 +81 @@
 
 === Step 7: Test for any extra fucntionality ===
- a. Test that any documented control plane performance isoaltion solution works as expected. ''(011)''
- b. Test that any documented data plane performance isoaltion solution works as expected. ''(012)''
- c. Test that any per-slice flow limits work as expected. ''(012)''
+ a. Test that any documented control plane performance isoaltion solution works as expected.  Consider using the following modules from OFTest: PacketInLoad, FlowModLoad, PacketOutLoad, FlowRemovedLoad. ''(011)''
+ b. Test that any documented data plane performance isoaltion solution works as expected.  This will involve appropriately setting up two slices, proactively installing flows, and starting UDP iperfs to make sure expected throughput is matched. ''(012)''
+ c. Test that any per-slice flow limits work as expected.  Consider using the OFTest FlowModLoad test or Floodlight static flow pusher. ''(012)''
 
 === Step 8: Test API ===