Changes between Version 12 and Version 13 of OpenFlow/Slicer/TestPlan

Timestamp:

11/12/14 13:35:44 (9 years ago)

Author:

tupty@bbn.com

Comment:

--

OpenFlow/Slicer/TestPlan

@@ -2 +2 @@
 
 = GENI OpenFlow Slicer Test Plan =
-This test plan is for validating requirements that are defined in the [wiki:OpenFlow/Slicer/Requirements GENI Slicer Requirements].  The focus of this test plan is testing that the requirements are satisfied in an environment that is close to how the slicer will be used in production.  In other words, it is not focused on unit testing.  This is also not a full blown integration test.  A lot of the data plane traffic is simple ICMP ping traffic.  Also, any of the limitations of the substrate will not be held against the slicer as part of this test plan.
+This test plan is for validating software that implements the [wiki:OpenFlow/Slicer/Requirements GENI Slicer Requirements].  The focus of this test plan is testing that the requirements are satisfied in an environment that is close to how the slicer will be used in production.  In other words, it is not focused on unit testing.  This is also not a full blown integration test.  A lot of the data plane traffic is simple ICMP ping traffic.  Also, any of the limitations of the substrate will not be held against the slicer as part of this test plan.
 
 == Expected test outcome ==
@@ -11 +11 @@
 
 == Tracking progress during testing ==
- * Test plan progress and results will be tracked at '''FIXME'''
+ * Test plan progress and results will be tracked at a subpage of http://groups.geni.net/geni/wiki/OpenFlow/Slicer/TestPlan/Results
  * Issues uncovered during testing must be tracked using a ticket system.  This ticket system can be provided by the slicer developers, or it can be the GENI wiki ticketing system.
- * Validated slice software versions will be documented at '''FIXME'''
- * If you would like for a specific piece of software to be tested, please contact '''FIXME'''
+ * Validated slice software versions will be documented at http://groups.geni.net/geni/wiki/OpenFlow/Slicer/TestPlan/Results
+ * If you would like for a specific piece of software to be tested, please contact help [at] geni [dot] net.
 
 ==  Assumptions and Dependencies ==