| Version 7 (modified by , 9 years ago) (diff) |
|---|
OpenFlow Slicer Test Plan Results
This page tracks the results of a piece of software run through the OpenFlow Slicer Test Plan.
| Software | Version |
Results Legend
Individual test case status may be one of the following:
- Color(green,Pass)? - Test case completed and met all criteria
- Color(#98FB98,Pass: most criteria)? - Test case completed and met most criteria with exceptions documented
- Color(red,Fail)? - Test case completed and failed.
- Color(orange,Blocked)? - Remaining testing blocked by ticketed issues.
OF-OPR-SLCR-FN Testing
Results
Step 1: Setup
| Test Case | Result | Note |
| 1.a.i. | Color(green,Pass)? | |
| 1.a.ii. | Color(green,Pass)? | |
| 1.a.iii. | Color(green,Pass)? | |
| 1.a.iv. | Color(green,Pass)? | |
| 1.a.v. | Color(green,Pass)? | |
| 1.b. | Color(green,Pass)? | |
| 1.c. | Color(green,Pass)? |
Step 2: Establish that basic connectivity works
| Test Case | Result | Note |
| 2.a. | Color(green,Pass)? | |
| 2.b. | Color(green,Pass)? | |
| 2.c. | Color(green,Pass)? | |
| 2.d. | Color(green,Pass)? | |
| 2.e. | Color(green,Pass)? | |
| 2.f.i. | Color(red,Fail)? | Slicer capture. This failure might be an issue with environment setup. Is slicer responsible for installing a "drop unmatched" rule? |
| 2.f.ii. | Color(green,Pass)? | Slicer capture |
| 2.f.iii. | Color(green,Pass)? | Slicer capture, Controller capture |
| 2.f.iv. | Color(green,Pass)? | Slicer capture, Controller capture |
| 2.f.v. | Color(green,Pass)? | Slicer capture, Controller capture |
| 2.g. | Color(green,Pass)? |
Step 3: Test for VLAN enforcement and translation
| Test Case | Result | Note |
| 3.a. | ||
| 3.b. | ||
| 3.c. | ||
| 3.d. | ||
| 3.e. |
Step 4: Check data plane throughput
| Test Case | Result | Note |
| 4.a. | Color(green,Pass)? | |
| 4.b. | Color(green,Pass)? | |
| 4.c. | Color(green,Pass)? | |
| 4.d. | Color(green,Pass)? | |
| 4.e. | Color(green,Pass)? |
Step 5: Test for OF functionality
| Test Case | Result | Note |
| 5.a. | Color(green,Pass)? | |
| 5.b. | Color(green,Pass)? | |
| 5.c. | Color(green,Pass)? | |
| 5.d.i. | Color(red,Fail)? | Known issue, will be fixed in next release |
| 5.d.ii. | ||
| 5.d.iii. | ||
| 5.e. | ||
| 5.f.i. | ||
| 5.f.ii. |
Test 6: Test for stacked slicer support
| Test Case | Result | Note |
| 6.a. | Color(green,Pass)? | |
| 6.b. | Color(green,Pass)? |
Test 7: Test for any extra functionality
| Test Case | Result | Note |
| 7.a. | ||
| 7.b. | ||
| 7.c. |
Test 8: Test management API
| Test Case | Result | Note |
| 8.a. | ||
| 8.b. | ||
| 8.c. | ||
| 8.d. |
Logs
Fill these in as needed
OF-OPR-SLCR-OP Testing
Results
Step 1: Setup
| Test Case | Result | Note |
| 1.a. | ||
| 1.b. |
Step 2: Collect monitoring data
| Test Case | Result | Note |
| 2.a. |
Step 3: Test slice operations
| Test Case | Result | Note |
| 3.a. | ||
| 3.b. | ||
| 3.c. | ||
| 3.d. | ||
| 3.e. |
Step 4: Substrate-generated traffic
| Test Case | Result | Note |
| 4.a. | ||
| 4.b. |
Step 5: Test logging
| Test Case | Result | Note |
| 5.a. | ||
| 5.b. | ||
| 5.c. | ||
| 5.d. | ||
| 5.e. |
Logs
Fill these in as needed
OF-OPR-SLCR-SW Testing
Results
Step 1: Perform validation steps
| Test Case | Result | Note |
| 1.a. | ||
| 1.b. | ||
| 1.c. | ||
| 1.d. | ||
| 1.e. |
Logs
Fill these in as needed
Integration Testing
Results
Step 1: Setup
| Test Case | Result | Note |
| 1.a. | ||
| 1.b. | ||
| 1.c. | ||
| 1.d. |
Step 2: Collect monitoring data
| Test Case | Result | Note |
| 2.a. |
Wishlist Testing
Results
Step 1: Check documentation
| Test Case | Result | Note |
| 1.a. | ||
| 1.b. | ||
| 1.c. |
Step 2: Set up the environment
| Test Case | Result | Note |
| 2.a. | ||
| 2.b. | ||
| 2.c. |
Step 3: Test that priority setting works
| Test Case | Result | Note |
| 3.a. | ||
| 3.b. | ||
| 3.c. | ||
| 3.d. |
Logs
Fill these in as needed
Attachments (19)
-
slicer.pcap (35.5 KB) - added by 9 years ago.
Step 2 slicer capture
-
dataplane.pcap (3.6 KB) - added by 9 years ago.
Step 2 data plane capture
-
controller.pcap (4.4 KB) - added by 9 years ago.
Step 2 controller capture
-
dataplane.2.pcap (3.6 KB) - added by 9 years ago.
Step 3 data plane capture
-
controller.2.pcap (16.0 KB) - added by 9 years ago.
Step 3 controller capture
-
controller.3.pcap (31.5 KB) - added by 9 years ago.
Step 7 controller capture
-
slicer.2.pcap (47.6 KB) - added by 9 years ago.
Step 5 slicer capture
-
functional_results.tar.gz (22.0 KB) - added by 9 years ago.
Results of functional test cases (doesn't include second half of step 5 test cases)
-
integration_results.tar.gz (284 bytes) - added by 9 years ago.
Integration testing results
-
slices.json (78 bytes) - added by 9 years ago.
Slice data from slicer
-
slice1-status.json (182 bytes) - added by 9 years ago.
Step 2 slice1 status from slicer
-
slice1-flows.json (3.5 KB) - added by 9 years ago.
Step 2 slice1 flows from slicer
-
flows.json (2.6 KB) - added by 9 years ago.
Step 3 substrate flows with no testslice flows
-
operations_results.tar.gz (1.3 KB) - added by 9 years ago.
Operations testing results
-
slice1-flows.2.json (2.8 KB) - added by 9 years ago.
HW testbed step 2 flows file
-
slice1-status.2.json (183 bytes) - added by 9 years ago.
HW testbed step 2 slice status file
-
slices.2.json (78 bytes) - added by 9 years ago.
HW testbed step 2 slices file
-
flows.2.json (5.8 KB) - added by 9 years ago.
HW testbed step 3 flows file
- operations_hw_results.tar.gz (1.3 KB) - added by 9 years ago.
Download all attachments as: .zip
