91 | | = OF-OPR-SLCR-OP Testing = |
| 91 | = OF-OPR-SLCR-OP Testing (in GENI) = |
| 92 | == Results == |
| 93 | === Step 1: Setup === |
| 94 | ||'''Test Case'''||'''Result'''||'''Note'''|| |
| 95 | || 1.a. ||[[Color(green,Pass)]]|| || |
| 96 | || 1.b. ||[[Color(green,Pass)]]|| || |
| 97 | |
| 98 | === Step 2: Collect monitoring data === |
| 99 | ||'''Test Case'''||'''Result'''||'''Note'''|| |
| 100 | || 2.a. ||[[Color(green,Pass)]]||[attachment:slices.json Slice list], [attachment:slice1-status.json Slice1 status], [attachment:slice1-flows.json Slice1 flows]|| |
| 101 | |
| 102 | === Step 3: Test slice operations === |
| 103 | ||'''Test Case'''||'''Result'''||'''Note'''|| |
| 104 | || 3.a. ||[[Color(green,Pass)]]|| || |
| 105 | || 3.b. ||[[Color(green,Pass)]]|| || |
| 106 | || 3.c. ||[[Color(green,Pass)]]|| || |
| 107 | || 3.d. ||[[Color(green,Pass)]]|| || |
| 108 | || 3.e. ||[[Color(red,Fail)]]||[attachment:flows.json Substrate flows], flows with testslice's VLAN ID of 200 still exist. This should be somewhat fixed in the next release with a granularity of the FSFW flow stat polling rate.|| |
| 109 | |
| 110 | === Step 4: Substrate-generated traffic === |
| 111 | ||'''Test Case'''||'''Result'''||'''Note'''|| |
| 112 | || 4.a. ||[[Color(green,Pass)]]|| || |
| 113 | || 4.b. ||[[Color(green,Pass)]]|| || |
| 114 | |
| 115 | === Step 5: Test logging === |
| 116 | ||'''Test Case'''||'''Result'''||'''Note'''|| |
| 117 | || 5.a. ||[[Color(green,Pass)]]|| || |
| 118 | || 5.b. ||[[Color(green,Pass)]]|| || |
| 119 | || 5.c. ||[[Color(green,Pass)]]|| || |
| 120 | || 5.d. ||[[Color(green,Pass)]]|| || |
| 121 | || 5.e. || || || |
| 122 | |
| 123 | == Logs == |
| 124 | This test was run using GENI and virtual switches. |
| 125 | |
| 126 | = OF-OPR-SLCR-OP Testing (in hardware testbed) = |