Changes between Version 7 and Version 8 of OnTimeMeasureTutorial


Ignore:
Timestamp:
02/10/12 15:07:26 (7 years ago)
Author:
yxu@osc.edu
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • OnTimeMeasureTutorial

    v7 v8  
    133133[[Image(image2.12.jpg)]]
    134134
    135 NOTE1: To install !OnTimeMeasure, make sure you have at least three nodes in your slice.
    136 
    137 NOTE2: You can choose nodes in utahemulab.cm if you can't find the needed disk image in section 2.3.2.1 and 2.3.2.2
     135'''NOTE1:''' To install !OnTimeMeasure, make sure you have at least three nodes in your slice.
     136
     137'''NOTE2:''' You can choose nodes in utahemulab.cm if you can't find the needed disk image in section 2.3.2.1 and 2.3.2.2
    138138
    139139===== 2.3.2.1 Set Root Beacon =====
     
    231231Please wait about 5 minutes for the installation of the Root Beacon. You can also jump to "Configure !OnTimeControl" section and confirm the Root Beacon installation later.
    232232
    233 Confirm the installation of Root Beacon (NOTE: use port number 17291 in the web-browser URL)
     233Confirm the installation of Root Beacon ('''NOTE:''' use port number 17291 in the web-browser URL)
    234234
    235235[[Image(image2.21.jpg)]]
    236236
    237 Confirm the installation of Node Beacons (NOTE: use port number 17291 in the web-browser URL of each Node Beacon).
     237Confirm the installation of Node Beacons ('''NOTE:''' use port number 17291 in the web-browser URL of each Node Beacon).
    238238
    239239[[Image(image2.22.jpg)]]
     
    288288"task_manage.py" manages the measurement tasks (i.e., requests). Edit measurement.yaml to configure tasks.
    289289
    290 NOTE: You may need to modify the node names if you are not using node1, node2, etc. as node names)
     290'''NOTE:''' You may need to modify the node names if you are not using node1, node2, etc. as node names)
    291291
    292292Run the "task_manage.py" with parameter "-c <measurement_config_file.yaml>".   
     
    350350
    351351=== 4.2 Configuration ===
    352 Click "Setup Resources" button. NOTE: The database password you need to enter is same as the otm_slice_password.
     352Click "Setup Resources" button. '''NOTE:''' The database password you need to enter is same as the otm_slice_password.
    353353 
    354354 [[Image(image060.jpg)]]
     
    450450}}}
    451451
    452 NOTE: Mycpu is the metric name configured in CPUSpecs.yaml
     452'''NOTE:''' Mycpu is the metric name configured in CPUSpecs.yaml
    453453
    454454=== 5.4 Manage Measurement Tasks with Custom Metric Measurement and Restart the Measurement ===
     
    496496Click the Create Content/Page link. Enter the title and body.
    497497
    498 In the body, enter the following text (NOTE: You need to change the pc355.emulab.net to host name of your Root Beacon ):
     498In the body, enter the following text ('''NOTE:''' You need to change the pc355.emulab.net to host name of your Root Beacon ):
    499499
    500500{{{
     
    765765}}}
    766766
    767 NOTE: 192.168.1.1, 192.168.1.2 and 192.168.1.3 are pre-defined IP address in config_example.yaml
     767'''NOTE:''' 192.168.1.1, 192.168.1.2 and 192.168.1.3 are pre-defined IP address in config_example.yaml
    768768
    769769The output:
     
    840840
    841841You can further follow the instructions in Sections 3-to-6 above to see measurement results for the newly added Node Beacon 3.
    842 NOTE: For Section 6 part, you need to manually install INSTOOLS as described at - http://groups.geni.net/geni/wiki/InstrumentationTools
     842'''NOTE:'''For Section 6 part, you need to manually install INSTOOLS as described at - http://groups.geni.net/geni/wiki/InstrumentationTools
    843843
    844844== 8. Use of OMNI to add !PlanetLab Nodes for !OnTimeMeasure slice measurements ==
     
    995995}}}
    996996
    997 NOTE: You need to modify login name and host name according to information you got in section 8.4)
     997'''NOTE:''' You need to modify login name and host name according to information you got in section 8.4)
    998998
    999999Invoke the following command to install the node beacon.
     
    10081008=== 8.6 Further Operation ===
    10091009You can further follow the instructions in Sections 3-to-7 above to see measurement results for the newly added !PlanetLab node.
    1010 NOTE: For Section 6 part, you need to manually install INSTOOLS as described at - http://groups.geni.net/geni/wiki/InstrumentationTools
    1011 
    1012 
     1010'''NOTE:''' For Section 6 part, you need to manually install INSTOOLS as described at - http://groups.geni.net/geni/wiki/InstrumentationTools
     1011
     1012
     1013=== '''NOTE:''' ===
     1014
     1015You can also reference http://groups.geni.net/geni/wiki/OnTime-Install and http://groups.geni.net/geni/wiki/OTM-PlanetLabInstall to install OnTimeMeasure Manually on ProtoGENI and PlanetLab.