Changes between Version 1 and Version 2 of I2PoPKANS

Timestamp:

09/08/09 10:29:59 (15 years ago)

Author:

Josh Karlin

Comment:

--

I2PoPKANS

@@ -99 +99 @@
 || C13 || unused || ||
 || C14-C20 || SPP ATCA || 1-7 ||
+
+
+=== Dell 2950 ProtoGENI node 1 ===
+{{{
+#!comment
+ [[Image(ProtoGENI-Dells-front.jpg,width=250,align=right)]]
+}}}
+
+|| Port || Destination Device || Dst. Port ||
+|| Gb1 || I2 HP 5406 || C13 ||
+|| mnmgt || ProtoGENI !ProCurve || A3 ||
+|| Gb2 || ProtoGENI !ProCurve || A4 ||
+|| i1 || ProtoGENI !ProCurve || A5 ||
+|| i2 ||  ProtoGENI !ProCurve || A6 ||
+|| i3 || ProtoGENI !ProCurve || A7 ||
+|| i4 ||  ProtoGENI !ProCurve || A8 ||
+|| netfpga1p0 || ProtoGENI !ProCurve || A9 ||
+|| netfpga1p1 || ProtoGENI !ProCurve || A10 ||
+|| netfpga1p2 || ProtoGENI !ProCurve || A11 ||
+|| netfpga1p3 || ProtoGENI !ProCurve || A12 ||
+|| netfpga2p0 || ProtoGENI !ProCurve || A13 ||
+|| netfpga2p1 || ProtoGENI !ProCurve || A14 ||
+|| netfpga2p2 || ProtoGENI !ProCurve || A15 ||
+|| netfpga2p3 || ProtoGENI !ProCurve || A16 ||
+
+
+=== Dell 2950 ProtoGENI node 2 ===
+{{{
+#!comment
+[[Image(ProtoGENI-Dells-back.jpg,width=300,align=right)]]
+}}}
+
+|| Port || Destination Device || Dst. Port ||
+|| Gb1 || I2 HP 5406 || C14 ||
+|| mnmgt || ProtoGENI !ProCurve || A17 ||
+|| Gb2 || ProtoGENI !ProCurve || A18 ||
+|| i1 || ProtoGENI !ProCurve || A19 ||
+|| i2 ||  ProtoGENI !ProCurve || A20 ||
+|| i3 || ProtoGENI !ProCurve || C1 ||
+|| i4 ||  ProtoGENI !ProCurve || C2 ||
+|| netfpga1p0 || ProtoGENI !ProCurve || C3 ||
+|| netfpga1p1 || ProtoGENI !ProCurve || C4 ||
+|| netfpga1p2 || ProtoGENI !ProCurve || C5 ||
+|| netfpga1p3 || ProtoGENI !ProCurve || C6 ||
+|| netfpga2p0 || ProtoGENI !ProCurve || C7 ||
+|| netfpga2p1 || ProtoGENI !ProCurve || C8 ||
+|| netfpga2p2 || ProtoGENI !ProCurve || C9 ||
+|| netfpga2p3 || ProtoGENI !ProCurve || C10 ||
+
+
+[[BR]][[BR]][[BR]]
+
+
+
+
+
+= SPP =
+[[PageOutline]]
+
+== Reaching SPP == 
+The SPP node at I2 SALT is connected to I2's Infinera via ProtoGENI's !ProCurve 5406 switch.  SPP is also connected to I2's production IP/DCN network via I2's !ProCurve switch.
+
+
+=== Technical Contacts ===
+ * John !DeHart (best to contact first) jdd@arl.wustl.edu
+ * David Zar dzar@wustl.edu
+[[BR]] 
+
+=== IP Addresses ===
+
+IP addresses have been assigned out of prefix 64.57.23.128/28.
+
+
+''The following addresses are only available to SPP administrators:''
+
+|| Device || DNS || Purpose || IP ||
+|| I2 Juniper T640 || || Gateway || 64.57.23.129 ||
+|| R200 Control Processor || || || 64.57.23.135  ||
+|| SPP Network Processor || || || 64.57.23.178/30 ||
+|| SPP Network Processor 2 || || || 64.57.23.182/30 ||
+|| SPP Network Processor 3 || || || 64.57.23.186/30 ||
+
+
+=== VLAN IDs ===
+
+|| Device || Port || Purpose || VLAN ID ||
+
+[[BR]][[BR]]
+== Equipment ==
+
+=== Dell R200 Control Processor ===
+{{{
+#!comment
+  [[Image(spp-dell-front.jpg,width=300,align=right)]]
+}}}
+
+|| Port || Destination Device || Dst. Port ||
+|| A || GPE2 || A ||
+|| B || GPE1 || B ||
+|| C || Netgear Console ||
+|| D || ATCA || D ||
+|| E || Radisys ATCA 2210 || E ||
+|| 3 || I2 !ProCurve || C11 ||
+
+
+=== Netgear Prosafe switch (GSM7328S) ===
+{{{
+#!comment
+[[Image(spp-netgear-front.jpg,width=300,align=right)]]
+}}}
+|| Port || Destination Device || Dst. Port ||
+|| Module 1 || ATCA 2210 (Slot 1) || XFP 1/4 ||
+|| Console || Control Processor || C ||
+|| 1 || Control Processor || NetFPGA 0 ||
+|| 2 || Control Processor || NetFPGA 1 ||
+|| 3 || Control Processor || NetFPGA 2 ||
+|| 4 || Control Processor || NetFPGA 3 ||
+
+=== ATCA Chassis ===
+{{{
+#!comment
+  [[Image(SPP-Backbone-Node.jpg,width=250,align=right)]]
+}}}
+==== Slot 6 - Radisys ATCA 7010 (LC) ====
+|| Port || Destination Device || Dst. Port ||
+|| 1 (back) || ProtoGENI !ProCurve || C14 ||
+|| 2 (back) || ProtoGENI !ProCurve || C15 ||
+|| 3 (back) || ProtoGENI !ProCurve || C16 ||
+|| 4 (back) || ProtoGENI !ProCurve || C17 ||
+|| 5 (back) || ProtoGENI !ProCurve || C18 ||
+|| 6 (back) || ProtoGENI !ProCurve || C19 ||
+|| 7 (back) || ProtoGENI !ProCurve || C20 ||
+|| 8 (back) || I2 !ProCurve || C6 ||
+|| 9 (back) || I2 !ProCurve || C7 ||
+|| 10 (back) || I2 !ProCurve || C8 ||
+|| NPU-B || Radisys 2210 || SFP 1/7 ||
+
+
+==== Slot 5 - Radisys ATCA 7010 (NPE) ====
+{{{
+#!comment
+[[Image(spp-node-front.jpg,width=200,align=right)]]  [[Image(spp-node-back.jpg,width=200,align=right)]]
+}}}
+|| Port || Destination Device || Dst. Port || 
+|| NPU-B || Radisys 2210 || SFP 1/8 ||
+
+
+==== Slot 4 - GPE2 ====
+|| Port || Destination Device || Dst. Port ||
+|| A || Control Processor || A ||
+
+
+==== Slot 3 - GPE1 ====
+|| Port || Destination Device || Dst. Port ||
+|| B || Control Processor || B ||
+
+
+
+==== Slot 2 - Empty ====
+
+==== Slot 1 - Radisys ATCA 2210 ====
+|| Port || Destination Device || Dst. Port ||
+|| SFP 3/1 (back) || Control Processor || 1 ||
+|| XFP 1/4 || Netgear switch mm lc-lc || module 1 ||
+|| SFP 1/6 || Processor || 2 ||
+|| SFP 1/7 || LC || NPU-B ||
+|| SFP 1/8 || NPE || NPU-B ||
+|| E || Control Processor || E ||