Changes between Version 14 and Version 15 of GeniNetworkStitchingConfirmationTests

Timestamp:

07/28/14 11:37:30 (10 years ago)

Author:

lnevers@bbn.com

Comment:

--

GeniNetworkStitchingConfirmationTests

@@ -35 +35 @@
 A stitching test between the new site and the GPO IG rack will be performed which uses two stitched links between the 2 sites sites using OpenVZ VMs:
 
-[[Image(IG-ST-2-ion.jpg)]]
+  [[Image(IG-ST-2-ion.jpg)]]
 
+If the New IG site is connected to AL2S, then it will be connected to another AL2S site rather than the GPO IG ION site. 
+
+  [[Image(IG-ST-2-al2s.jpg)]]
 
 === IG-ST-3 New Site 3 node linear topology ===
@@ -42 +45 @@
 A stitching test that will use the new site as part of a linear topology, where each rack reserves one host and traffic is exchanged between the end-points:
 
-[[Image(IG-ST-3-ion.jpg)]]
+  [[Image(IG-ST-3-ion.jpg)]]
 
 === IG-ST-4 New Site to GPO EG interoperability === 
@@ -48 +51 @@
 A stitching test between the new site and the GPO EG rack will be performed for each network path available at the new site. For each stitching path tested in this test case, performance data will be captured between the New IG site and GPO EG for TCP, UDP and ping statistics.
 
-[[Image(IG-ST-4-ion.jpg)]]
+  [[Image(IG-ST-4-ion.jpg)]]
 
 If the New IG site is connected to AL2s and the GPO EG is connected to ION, the following topology will be verified:
 
-[[Image(IG-ST-4-al2s.jpg)]]
+  [[Image(IG-ST-4-al2s.jpg)]]
 
 ''Note'':  Test was modified to use dedicated hosts (raw-pcs) to collect performance data.  Also plan to switch the ExoGENI host to bare metal, when stitching to bare metal is supported.