wiki:GeniNetworkStitchingConfirmationTestStatus/VirginiaTech

Version 3 (modified by lnevers@bbn.com, 9 years ago) (diff)

--

VirginiaTech Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The VirginiaTech site advertises the following stitching details:

<stitching xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/" lastUpdateTime="2015-05-12T17:11:22Z" >
<aggregate id="urn:publicid:IDN+instageni.arc.vt.edu+authority+cm" url="https://www.instageni.arc.vt.edu:12369/protogeni/xmlrpc/am">
<aggregatetype>protogeni</aggregatetype>
<stitchingmode>chainANDTree</stitchingmode>
<scheduledservices>false</scheduledservices>
<negotiatedservices>false</negotiatedservices>
<lifetime id="life">
    <start type="time">2015-05-12T17:11:22Z</start>
    <end type="time">2015-05-12T17:11:22Z</end>
</lifetime>
<node id="urn:publicid:IDN+instageni.arc.vt.edu+node+procurve2">
  <port id="urn:publicid:IDN+instageni.arc.vt.edu+stitchport+procurve2:2.21.al2s">
    <capacity>1000000</capacity>
    <maximumReservableCapacity>1000000</maximumReservableCapacity>
    <minimumReservableCapacity>1000</minimumReservableCapacity>
    <granularity>1</granularity>
    <link id="urn:publicid:IDN+instageni.arc.vt.edu+interface+procurve2:2.21.al2s">
      <remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.ashb.net.internet2.edu:et-3/0/0.0:vt-ig</remoteLinkId>
      <trafficEngineeringMetric>10</trafficEngineeringMetric>
      <capacity>1000000</capacity>
      <maximumReservableCapacity>1000000</maximumReservableCapacity>
      <minimumReservableCapacity>1000</minimumReservableCapacity>
      <granularity>1</granularity>
      <switchingCapabilityDescriptor>
        <switchingcapType>l2sc</switchingcapType>
        <encodingType>ethernet</encodingType>
        <switchingCapabilitySpecificInfo>
         <switchingCapabilitySpecificInfo_L2sc>
          <interfaceMTU>1500</interfaceMTU>
          <vlanRangeAvailability>4001-4015</vlanRangeAvailability>
          <vlanTranslation>false</vlanTranslation>
         </switchingCapabilitySpecificInfo_L2sc>
        </switchingCapabilitySpecificInfo>
      </switchingCapabilityDescriptor>
    </link>
  </port>
</node>
</aggregate>
</stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec -o
13:14:17 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre2/src/gcf/stitcher_logging.conf
13:14:18 INFO    : Reading slice IG-ST-1 credential...
13:14:18 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-05-30 00:00:00 UTC
13:14:18 INFO    : Calling SCS...
13:14:21 INFO    : Multi-AM reservation will include resources from these aggregates:
13:14:21 INFO    : 	<Aggregate gpo-ig>
13:14:21 INFO    : 	<Aggregate al2s>
13:14:21 INFO    : 	<Aggregate vt-ig>
13:14:21 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:14:40 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:14:40 INFO    : Stitcher doing createsliver at <Aggregate vt-ig>...
13:14:57 INFO    : ... Allocation at <Aggregate vt-ig> complete.
13:14:57 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:15:02 INFO    : ... Allocation at <Aggregate al2s> complete.
13:15:02 INFO    : All aggregates are complete.
13:15:02 INFO    : Your resources expire at 2015-05-29T17:04:21 (UTC). 
13:15:02 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/VirginiaTech/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each VirginiaTech and GPO aggregate:

$ readyToLogin.py IG-ST-1 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

ig-vt's geni_status is: ready 
User lnevers logs in to ig-vt using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.arc.vt.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI VirginiaTech VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to InstaGENI VirginiaTech VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to the InstaGENI VirginiaTech VM

Iperf InstaGENI VirginiaTech VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf InstaGENI VirginiaTech VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI VirginiaTech VM to GPO InstaGENI VM

IG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
13:18:05 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre2/src/gcf/stitcher_logging.conf
13:18:05 INFO    : Reading slice IG-ST-2 credential...
13:18:06 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-05-30 00:00:00 UTC
13:18:06 INFO    : Calling SCS...
13:18:08 INFO    : Multi-AM reservation will include resources from these aggregates:
13:18:08 INFO    : 	<Aggregate gpo-ig>
13:18:08 INFO    : 	<Aggregate al2s>
13:18:08 INFO    : 	<Aggregate vt-ig>
13:18:08 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:18:23 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:18:23 INFO    : Stitcher doing createsliver at <Aggregate vt-ig>...
13:18:43 INFO    : ... Allocation at <Aggregate vt-ig> complete.
13:18:43 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:18:50 INFO    : ... Allocation at <Aggregate al2s> complete.
13:18:50 INFO    : All aggregates are complete.
13:18:50 INFO    : Your resources expire at 2015-05-29T17:08:08 (UTC). 
13:18:50 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/VirginiaTech/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each VirginiaTech and GPO aggregate:

$ readyToLogin.py IG-ST-2 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-vt's geni_status is: changing 
User lnevers logs in to ig-vt using:
	ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.arc.vt.edu

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 
-c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
Key file [/home/lnevers/.ssh/arendia-id_rsa] does NOT exist.
Key file [/home/lnevers/.ssh/sendaria-id_rsa] does NOT exist.
Key file [/home/lnevers/.ssh/lnevers-id_rsa] does NOT exist.
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo

PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59094ms
rtt min/avg/max/mdev = 19.253/19.894/38.725/2.524 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59092ms
rtt min/avg/max/mdev = 19.245/19.954/38.711/2.648 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo

IG-ST-3 IG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
13:20:44 INFO    : Configured logging from file /home/lnevers/gcf-2.9-pre2/src/gcf/stitcher_logging.conf
13:20:45 INFO    : Reading slice IG-ST-3 credential...
13:20:45 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3 expires on 2015-05-30 00:00:00 UTC
13:20:45 INFO    : Calling SCS...
13:20:47 INFO    : Multi-AM reservation will include resources from these aggregates:
13:20:47 INFO    : 	<Aggregate cwru-ig>
13:20:47 INFO    : 	<Aggregate gpo-ig>
13:20:47 INFO    : 	<Aggregate al2s>
13:20:47 INFO    : 	<Aggregate vt-ig>
13:20:47 INFO    : Stitcher doing createsliver at <Aggregate cwru-ig>...
13:21:05 INFO    : ... Allocation at <Aggregate cwru-ig> complete.
13:21:05 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
13:21:26 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
13:21:26 INFO    : Stitcher doing createsliver at <Aggregate vt-ig>...
13:21:43 INFO    : ... Allocation at <Aggregate vt-ig> complete.
13:21:43 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
13:21:51 INFO    : ... Allocation at <Aggregate al2s> complete.
13:21:51 INFO    : All aggregates are complete.
13:21:51 INFO    : Your resources expire at 2015-05-29T17:10:47 (UTC). 
13:21:51 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/VirginiaTech/IG-ST-3-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3 at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the VirginiaTech host:

$ readyToLogin.py IG-ST-3 -a vt-ig
  ....
ig-vt's geni_status is: ready 
User lnevers logs in to ig-vt using:
	ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.arc.vt.edu

Login to the VirginiaTech host and ping each remote:

#ping GPO IG 
lnevers@ig-vt:~$  ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59094ms
rtt min/avg/max/mdev = 19.259/19.526/20.315/0.233 ms

# UKYPKS2 IG
lnevers@ig-vt:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59073ms
rtt min/avg/max/mdev = 16.854/16.996/17.359/0.159 ms

IG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec IG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

Determined login information at each VirginiaTech and GPO aggregate:

$ readyToLogin.py IG-ST-4 --useSliceAggregates
  ....

Measurements

Iperf ExoGENI GPO VM to InstaGENI VirginiaTech VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf ExoGENI GPO VM to InstaGENI VirginiaTech VM (UDP) - UDP buffer size: 208 KByte (default)

Ping from ExoGENI GPO VM to the InstaGENI VirginiaTech VM

Iperf InstaGENI VirginiaTech VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf InstaGENI VirginiaTech VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI VirginiaTech VM to ExoGENI GPO VM

IG-ST-5 Site Information

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the VirginiaTech Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

omni.py createslice IG-ST-6
stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o

Determined login information at each VirginiaTech and GPO aggregate:

$ readyToLogin.py IG-ST-6 --useSliceAggregates
  ....

Measurements

Iperf InstaGENI GPO VM to InstaGENI VirginiaTech VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-xx

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to InstaGENI VirginiaTech VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to InstaGENI VirginiaTech VM

Iperf InstaGENI VirginiaTech VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-xx

One Client_

Five Clients

Ten Clients

Iperf InstaGENI VirginiaTech VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI VirginiaTech VM to InstaGENI GPO VM


Email help@geni.net for GENI support or email me with feedback on this page!