Changes between Version 2 and Version 3 of GeniNetworkStitchingConfirmationTestStatus/VCU


Ignore:
Timestamp:
07/29/17 11:30:06 (7 years ago)
Author:
lnevers@bbn.com
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • GeniNetworkStitchingConfirmationTestStatus/VCU

    v2 v3  
    163163ping 192.168.4.1 -c 60 -q
    164164}}}
    165 
    166 == IG-ST-4 New Site to GPO EG interoperability ==
    167 
    168 
    169 Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/VCU/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
    170 
    171 {{{
    172 omni.py createslice IG-ST-4
    173 stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
    174 }}}
    175 
    176 Determined login information at each VCU and GPO aggregate:
    177 {{{
    178 $ readyToLogin.py IG-ST-4 --useSliceAggregates
    179 }}}
    180 
    181 === Measurements ===
    182 
    183 '''Iperf ExoGENI GPO VM to InstaGENI VCU VM (TCP) - TCP window size: 85.0 KByte (default)'''
    184 
    185 ''Collected: 2017-07-XX''
    186 
    187 __One Client_
    188 {{{
    189 
    190 }}}
    191 
    192 __Five Clients__
    193 {{{
    194 
    195 }}}
    196 
    197 __Ten Clients__
    198 {{{
    199 
    200 }}}
    201 
    202 '''Iperf ExoGENI GPO VM to InstaGENI VCU VM (UDP) - UDP buffer size:  208 KByte (default) '''
    203 {{{
    204 
    205 }}}
    206 
    207 '''Ping from ExoGENI GPO VM to the InstaGENI VCU VM '''
    208 {{{
    209 
    210 }}}
    211 
    212 XXX
    213 
    214165== IG-ST-4 New Site to GPO EG interoperability ==
    215166