wiki:GeniNetworkStitchingConfirmationTestStatus/Utah

Version 2 (modified by lnevers@bbn.com, 9 years ago) (diff)

--

University of Utah CloudLab Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

CL-ST-1 New Site to GPO IG topology

The CloudLab site advertises the following stitching details:

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec CL-ST-1-al2s.rspec:

omni.py createslice CL-ST-1
stitcher.py createsliver CL-ST-1 CL-ST-1-al2s.rspec -o

Determined login information at each CloudLab and GPO aggregate:

$ readyToLogin.py CL-ST-1 --useSliceAggregates
  ....

Measurements

Iperf InstaGENI GPO VM to Utah CloudLab Raw-PC (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf InstaGENI GPO VM to Utah CloudLab Raw-PC (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI GPO VM to the Utah CloudLab Raw-PC

Iperf Utah CloudLab Raw-PC to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-05-XX

One Client_

Five Clients

Ten Clients

Iperf Utah CloudLab Raw-PC to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from Utah CloudLab Raw-PC to GPO InstaGENI VM