Changes between Version 2 and Version 3 of GeniNetworkStitchingConfirmationTestStatus/Utah-stitch

Timestamp:

06/03/15 15:55:04 (9 years ago)

Author:

lnevers@bbn.com

Comment:

--

GeniNetworkStitchingConfirmationTestStatus/Utah-stitch

@@ -3 +3 @@
 = Utah Stitching Aggregate Confirmation Tests =
 
-This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.]
+This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.
 
 ''*** Note that the Utah Stitching Aggregate (aka utah-stitch) is part of the network path for all experiments on this page ***''
@@ -205 +205 @@
 User lnevers logs in to ddc using:
         ssh -p 33594  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc11.utahddc.geniracks.net
-
-}}}
-Verified connectivity by pinging the GPO IG host from the Utha DDC IG host:
+}}}
+Verified ICMP connectivity by pinging the GPO IG host from the Utha DDC IG host:
 {{{
 $ remote-execute -a utahddc-ig IG-ST-1 -m "ping -c 5 192.168.1.1"
+}}}
+
+Also verified UDP and TCP connectivity with iperf:
+{{{
+
+XXX
 
 }}}
@@ -262 +267 @@
 == IG-ST-3 IG-ST-3 New Site 3 node linear topology ==
 
-Create a slice and then create slivers for the topology ''' GPO IG<->PG Utah<-> Utah IG''':
-{{{
-omni.py createslice IG-ST-3
-stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
+Create a slice and then create slivers for the topology ''' UTC IG<->PG Utah<-> Utah IG''':
+{{{
+$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
 }}}
 
@@ -272 +276 @@
 $ readyToLogin.py IG-ST-3 --useSliceAggregates 
   ....
-}}}
-Login to the VirginiaTech host and ping each remote:
+ig-gpo's geni_status is: ready 
+User lnevers logs in to ig-gpo using:
+        ssh -p 36410  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com
+ ....
+ig-utah's geni_status is: ready 
+User lnevers logs in to ig-utah using:
+        ssh -p 30522  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.utah.geniracks.net
+ ....
+pg-utah's geni_status is: failed 
+User lnevers logs in to pg-utah using:
+        ssh -p 30778  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc534.emulab.net
+
+}}}
+Login to the Emulab host and ping each remote:
 {{{
 #ping GPO IG
 ping 192.168.2.1 -c 60 -q
-# UKYPKS2 IG
+# Utah IG
 ping 192.168.4.1 -c 60 -q
 }}}
@@ -283 +299 @@
 == IG-ST-4 New Site to GPO EG interoperability ==
 Create a slice and then sliver to connect '''EG GPO to Utah IG'''
+{{{
+$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
+15:34:07 INFO    : Configured logging from file /home/lnevers/gcf-2.9/src/gcf/stitcher_logging.conf
+15:34:08 INFO    : Reading slice IG-ST-4 credential...
+15:34:08 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2015-06-10 19:34:03 UTC
+15:34:08 INFO    : Calling SCS...
+15:34:09 INFO    : Multi-AM reservation will include resources from these aggregates:
+15:34:09 INFO    :      <Aggregate utah-stitch>
+15:34:09 INFO    :      <Aggregate al2s>
+15:34:09 INFO    :      <Aggregate gpo-eg>
+15:34:09 INFO    :      <Aggregate utah-ig>
+15:34:09 INFO    : Gathering currently available VLAN tags at <Aggregate utah-ig>...
+15:34:12 INFO    : Stitcher doing createsliver at <Aggregate utah-stitch>...
+15:34:32 INFO    : ... Allocation at <Aggregate utah-stitch> complete.
+15:34:32 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
+15:34:42 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
+15:34:42 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
+15:34:44 ERROR   :  {'output': 'Exception: requested VLAN unavailable: sdn-sw.salt.net.internet2.edu,eth7/1 VLAN=2754', 'code': {'geni_code': 24}}
+15:34:44 INFO    : Deleting some reservations to retry, avoiding failed VLAN...
+15:34:44 INFO    : Doing deletesliver at <Aggregate utah-stitch>...
+15:35:09 INFO    : Will put <Aggregate al2s> back in the pool to allocate. Got: Retrying reservations at earlier AMs to avoid unavailable VLAN tag at <Aggregate al2s>....
+15:35:09 INFO    : Pausing for 30 seconds for Aggregates to free up resources...
+
+
+15:35:39 INFO    : Checking that prior reservation at <Aggregate utah-stitch> has been cleared up....
+15:35:41 ERROR   :  {'output': 'No slice or aggregate here', 'code': {'protogeni_error_log': 'urn:publicid:IDN+stitch.geniracks.net+log+9877b4a4ae8e49358df28c56b8ec89ef', 'am_type': 'protogeni', 'geni_code': 12, 'am_code': 12, 'protogeni_error_url': 'https://www.stitch.geniracks.net/spewlogfile.php3?logfile=9877b4a4ae8e49358df28c56b8ec89ef'}, 'value': 0}
+15:35:41 INFO    : ... it is, so can try a new reservation.
+15:35:41 INFO    : Stitcher doing createsliver at <Aggregate utah-stitch>...
+15:36:01 INFO    : ... Allocation at <Aggregate utah-stitch> complete.
+15:36:01 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
+15:36:05 INFO    : ... Allocation at <Aggregate al2s> complete.
+15:36:05 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
+15:36:20 INFO    : ... Allocation at <Aggregate utah-ig> complete.
+15:36:20 INFO    : All aggregates are complete.
+15:36:20 INFO    : Your resources expire at 2015-06-08T19:24:12 (UTC). 
+15:36:20 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/Utah-stitch/IG-ST-4-manifest-rspec-multiam-combined.xml'
+Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
+}}}
+Determined login information at each VirginiaTech and GPO aggregate:
+{{{
+$ readyToLogin.py IG-ST-4 --useSliceAggregates
+  ....
+}}}
+
+Verify the sites can exchange traffic: