[[PageOutline]]
= University of California Los Angeles Stitching Confirmation Tests =
This pages capture the detailed test logs for each test defined in the [wiki:GeniNetworkStitchingConfirmationTests New Site Stitching Confirmation Tests] page. For the sites status see the [wiki:GeniNetworkStitchingConfirmationTestStatus New Site Stitching Confirmation Tests Status] page.
== IG-ST-1 New Site to GPO IG topology ==
The UCLA site advertises the following stitching details:
{{{
protogenichainANDTreefalsefalse2014-11-18T18:36:25Z2014-11-18T18:36:25Z1000000100000010001urn:publicid:IDN+al2s.internet2.edu+interface+sdn-sw.losa.net.internet2.edu:e5/1:ucla-ig
101000000100000010001l2scethernet15001610-1629false
}}}
Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCLA/IG-ST-1-al2s.rspec IG-ST-1-al2s.rspec]:
{{{
$ stitcher.py createsliver IG-ST-1a IG-ST-1-al2s.rspec -o
14:55:53 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
14:55:53 INFO : Reading slice IG-ST-1a credential...
14:55:54 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1a expires on 2014-11-25 19:13:52 UTC
14:55:54 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
14:55:54 INFO : Calling SCS...
14:55:57 INFO : Multi-AM reservation will include resources from these aggregates:
14:55:57 INFO :
14:55:57 INFO :
14:55:57 INFO :
14:55:57 INFO :
14:55:57 INFO : Stitcher doing createsliver at ...
14:56:15 INFO : ... Allocation at complete.
14:56:15 INFO : Stitcher doing createsliver at ...
14:56:32 INFO : ... Allocation at complete.
14:56:32 INFO : Stitcher doing createsliver at ...
14:56:37 INFO : ... Allocation at complete.
14:56:37 INFO : Stitcher doing createsliver at ...
14:57:26 INFO : DCN AM : must wait for status ready....
14:57:26 INFO : Pausing 30 seconds to let circuit become ready...
14:58:05 INFO : Pausing 30 seconds to let circuit become ready...
14:58:42 INFO : Pausing 30 seconds to let circuit become ready...
14:59:21 INFO : DCN circuit 139281 is ready at
14:59:30 INFO : ... Allocation at complete.
14:59:30 INFO : All aggregates are complete.
14:59:30 INFO : Your resources expire at 2014-11-24T19:45:57 (UTC).
14:59:30 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-1a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1a at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCLA and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-1a -a ucla-ig
....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu
$ readyToLogin.py IG-ST-1a -a gpo-ig
....
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 34362 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com
}}}
=== Measurements ===
'''Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-11-18''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 140 MBytes 19.6 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-60.1 sec 35.9 MBytes 5.01 Mbits/sec
[ 6] 0.0-60.1 sec 24.6 MBytes 3.43 Mbits/sec
[ 7] 0.0-60.7 sec 24.4 MBytes 3.37 Mbits/sec
[ 4] 0.0-60.9 sec 28.8 MBytes 3.96 Mbits/sec
[ 3] 0.0-61.0 sec 29.6 MBytes 4.07 Mbits/sec
[SUM] 0.0-61.0 sec 143 MBytes 19.7 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-60.1 sec 15.1 MBytes 2.11 Mbits/sec
[ 12] 0.0-60.3 sec 12.4 MBytes 1.72 Mbits/sec
[ 9] 0.0-60.5 sec 15.0 MBytes 2.08 Mbits/sec
[ 7] 0.0-60.7 sec 13.4 MBytes 1.85 Mbits/sec
[ 6] 0.0-61.0 sec 15.9 MBytes 2.18 Mbits/sec
[ 8] 0.0-61.0 sec 12.9 MBytes 1.77 Mbits/sec
[ 11] 0.0-61.1 sec 12.0 MBytes 1.65 Mbits/sec
[ 10] 0.0-61.2 sec 14.1 MBytes 1.94 Mbits/sec
[ 3] 0.0-61.4 sec 16.1 MBytes 2.20 Mbits/sec
[ 4] 0.0-61.9 sec 18.9 MBytes 2.56 Mbits/sec
[SUM] 0.0-61.9 sec 146 MBytes 19.8 Mbits/sec
}}}
'''Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512806 datagrams
[ 3] Server Report:
[ 3] 0.0-60.3 sec 139 MBytes 19.4 Mbits/sec 14.175 ms 413474/512801 (81%)
[ 3] 0.0-60.3 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI GPO VM to the InstaGENI UCLA VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59103ms
rtt min/avg/max/mdev = 79.530/79.890/80.192/0.333 ms
}}}
'''Iperf InstaGENI UCLA VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-11-18''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.1 sec 140 MBytes 19.5 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-60.0 sec 33.6 MBytes 4.70 Mbits/sec
[ 3] 0.0-60.1 sec 34.8 MBytes 4.85 Mbits/sec
[ 4] 0.0-60.4 sec 20.8 MBytes 2.88 Mbits/sec
[ 5] 0.0-60.6 sec 33.1 MBytes 4.58 Mbits/sec
[ 6] 0.0-60.7 sec 21.1 MBytes 2.92 Mbits/sec
[SUM] 0.0-60.7 sec 143 MBytes 19.8 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.0 sec 14.0 MBytes 1.96 Mbits/sec
[ 5] 0.0-60.2 sec 20.6 MBytes 2.87 Mbits/sec
[ 8] 0.0-60.5 sec 15.5 MBytes 2.15 Mbits/sec
[ 4] 0.0-60.6 sec 14.8 MBytes 2.04 Mbits/sec
[ 12] 0.0-60.8 sec 12.9 MBytes 1.78 Mbits/sec
[ 7] 0.0-61.2 sec 13.4 MBytes 1.83 Mbits/sec
[ 10] 0.0-61.3 sec 13.4 MBytes 1.83 Mbits/sec
[ 11] 0.0-61.6 sec 11.2 MBytes 1.53 Mbits/sec
[ 3] 0.0-61.7 sec 19.0 MBytes 2.58 Mbits/sec
[ 9] 0.0-61.8 sec 11.9 MBytes 1.61 Mbits/sec
[SUM] 0.0-61.8 sec 147 MBytes 19.9 Mbits/sec
}}}
'''Iperf InstaGENI UCLA VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512782 datagrams
[ 3] Server Report:
[ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec 10.430 ms 413461/512779 (81%)
[ 3] 0.0-60.2 sec 1 datagrams received out-of-order
}}}
'''Ping from InstaGENI UCLA VM to GPO InstaGENI VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 79.545/79.884/80.234/0.288 ms
}}}
== IG-ST-2 New Site to GPO IG Loop topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCLA/IG-ST-2.rspec IG-ST-2.rspec]:
{{{
$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
15:21:12 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
15:21:12 INFO : Reading slice IG-ST-2 credential...
15:21:12 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2014-11-25 20:21:11 UTC
15:21:12 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
15:21:12 INFO : Calling SCS...
15:21:17 INFO : Multi-AM reservation will include resources from these aggregates:
15:21:17 INFO :
15:21:17 INFO :
15:21:17 INFO :
15:21:17 INFO :
15:21:17 INFO : Stitcher doing createsliver at ...
15:21:47 INFO : ... Allocation at complete.
15:21:47 INFO : Stitcher doing createsliver at ...
15:22:05 INFO : ... Allocation at complete.
15:22:05 INFO : Stitcher doing createsliver at ...
15:22:13 INFO : ... Allocation at complete.
15:22:13 INFO : Stitcher doing createsliver at ...
15:22:58 INFO : DCN AM : must wait for status ready....
15:22:58 INFO : Pausing 30 seconds to let circuit become ready...
15:23:36 INFO : Pausing 30 seconds to let circuit become ready...
15:24:13 INFO : DCN circuit 139331 is ready at
15:24:13 INFO : DCN circuit 139341 is ready at
15:24:20 INFO : ... Allocation at complete.
15:24:20 INFO : All aggregates are complete.
15:24:20 INFO : Your resources expire at 2014-11-24T20:11:17 (UTC).
15:24:20 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}
Determined login information at each UCLA and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-2 -a ucla-ig
....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
ssh -p 31290 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu
$ readyToLogin.py IG-ST-2 -a gpo-ig
....
ig-gpo's geni_status is: ready
User lnevers logs in to ig-gpo using:
ssh -p 35898 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com
}}}
Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:
{{{
$ remote-execute.py IG-ST-2 -a gpo-ig -m "ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q"
1. Find login Info for hosts in slice IG-ST-2
2. Send command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' to ig-gpo
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.
--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59078ms
rtt min/avg/max/mdev = 79.096/80.629/160.801/10.445 ms
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.
--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59072ms
rtt min/avg/max/mdev = 79.000/80.553/159.113/10.234 ms
... Done with command 'ping 10.10.4.2 -c 60 -q ;ping 192.168.4.2 -c 60 -q' at ig-gpo
}}}
== IG-ST-3 New Site 3 node linear topology ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCLA/IG-ST-3.rspec IG-ST-3.rspec]:
{{{
$ stitcher.py createsliver IG-ST-3a IG-ST-3.rspec -o
16:02:03 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
16:02:03 INFO : Reading slice IG-ST-3a credential...
16:02:04 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3a expires on 2014-11-25 21:02:02 UTC
16:02:04 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
16:02:04 INFO : Calling SCS...
16:02:09 INFO : Multi-AM reservation will include resources from these aggregates:
16:02:09 INFO :
16:02:09 INFO :
16:02:09 INFO :
16:02:09 INFO :
16:02:09 INFO :
16:02:09 INFO : Stitcher doing createsliver at ...
16:02:28 INFO : ... Allocation at complete.
16:02:28 INFO : Stitcher doing createsliver at ...
16:02:48 INFO : ... Allocation at complete.
16:02:48 INFO : Stitcher doing createsliver at ...
16:03:07 INFO : ... Allocation at complete.
16:03:07 INFO : Stitcher doing createsliver at ...
16:03:15 INFO : ... Allocation at complete.
16:03:15 INFO : Stitcher doing createsliver at ...
16:04:01 INFO : DCN AM : must wait for status ready....
16:04:01 INFO : Pausing 30 seconds to let circuit become ready...
16:04:38 INFO : Pausing 30 seconds to let circuit become ready...
16:05:16 INFO : DCN circuit 139391 is ready at
16:05:16 INFO : DCN circuit 139381 is ready at
16:05:23 INFO : ... Allocation at complete.
16:05:23 INFO : All aggregates are complete.
16:05:23 INFO : Your resources expire at 2014-11-24T20:52:09 (UTC).
16:05:23 INFO : Saved combined reservation RSpec at 5 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-3a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3a at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).
}}}
Determined login information the UCLA host:
{{{
$ readyToLogin.py IG-ST-3a -a ucla-ig
....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
ssh -p 31546 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.idre.ucla.edu
}}}
Login to the UCLA host and ping each remote:
{{{
#ping GPO IG
[lnevers@ig-ucla ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.
--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59071ms
rtt min/avg/max/mdev = 78.995/79.170/79.435/0.208 ms
# UKYPKS2 IG
[lnevers@ig-ucla ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.
--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59092ms
rtt min/avg/max/mdev = 68.379/69.716/141.436/9.341 ms
}}}
== IG-ST-4 New Site to GPO EG interoperability ==
Create a slice and then create the stitched slivers with the RSpec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCLA/IG-ST-4.rspec IG-ST-4.rspec], which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.
{{{
$ stitcher.py createsliver IG-ST-4 IG-ST-4.rspec -o
12:42:33 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
12:42:34 INFO : Reading slice IG-ST-4 credential...
12:42:35 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-4 expires on 2014-11-25 20:45:27 UTC
12:42:35 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
12:42:35 INFO : Calling SCS...
12:42:38 INFO : Multi-AM reservation will include resources from these aggregates:
12:42:38 INFO :
12:42:38 INFO :
12:42:38 INFO :
12:42:38 INFO :
12:42:38 INFO : Stitcher doing createsliver at ...
12:42:56 INFO : ... Allocation at complete.
12:42:56 INFO : Stitcher doing createsliver at ...
12:43:15 INFO : ... Allocation at complete.
12:43:15 INFO : Stitcher doing createsliver at ...
12:43:20 INFO : ... Allocation at complete.
12:43:20 INFO : Stitcher doing createsliver at ...
12:44:06 INFO : DCN AM : must wait for status ready....
12:44:06 INFO : Pausing 30 seconds to let circuit become ready...
12:44:44 INFO : Pausing 30 seconds to let circuit become ready...
12:45:21 INFO : DCN circuit 139821 is ready at
12:45:28 INFO : ... Allocation at complete.
12:45:28 INFO : All aggregates are complete.
12:45:28 INFO : Your resources expire at 2014-11-25T17:32:38 (UTC).
12:45:28 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-4-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-4 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCLA and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-4 -a ucla-ig
....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
ssh -p 31546 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.idre.ucla.edu
$ readyToLogin.py IG-ST-4 -a gpo-eg
....
eg-gpo's geni_status is: ready
User lnevers logs in to eg-gpo using:
ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.24
}}}
=== Measurements ===
'''Iperf ExoGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 85.0 KByte (default)'''
''Collected: 2014-11-20''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.1 sec 184 MBytes 25.7 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.0 sec 138 MBytes 19.2 Mbits/sec
[ 7] 0.0-60.1 sec 138 MBytes 19.3 Mbits/sec
[ 5] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec
[ 4] 0.0-60.1 sec 139 MBytes 19.4 Mbits/sec
[ 3] 0.0-60.2 sec 138 MBytes 19.2 Mbits/sec
[SUM] 0.0-60.2 sec 692 MBytes 96.5 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-60.1 sec 70.8 MBytes 9.88 Mbits/sec
[ 10] 0.0-60.0 sec 68.4 MBytes 9.55 Mbits/sec
[ 3] 0.0-60.1 sec 68.4 MBytes 9.55 Mbits/sec
[ 5] 0.0-60.2 sec 71.9 MBytes 10.0 Mbits/sec
[ 6] 0.0-60.2 sec 71.9 MBytes 10.0 Mbits/sec
[ 4] 0.0-60.2 sec 68.9 MBytes 9.60 Mbits/sec
[ 9] 0.0-60.2 sec 70.9 MBytes 9.87 Mbits/sec
[ 12] 0.0-60.2 sec 68.1 MBytes 9.49 Mbits/sec
[ 11] 0.0-60.3 sec 68.2 MBytes 9.49 Mbits/sec
[ 7] 0.0-60.4 sec 71.5 MBytes 9.93 Mbits/sec
[SUM] 0.0-60.4 sec 699 MBytes 97.0 Mbits/sec
}}}
'''Iperf ExoGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 208 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512810 datagrams
[ 3] Server Report:
[ 3] 0.0-60.0 sec 673 MBytes 94.1 Mbits/sec 0.084 ms 32644/512809 (6.4%)
[ 3] 0.0-60.0 sec 1 datagrams received out-of-order
}}}
'''Ping from ExoGENI GPO VM to the InstaGENI UCLA VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59075ms
rtt min/avg/max/mdev = 79.907/80.179/80.831/0.305 ms
}}}
'''Iperf InstaGENI UCLA VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-11-20''
__One Client_
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 277 MBytes 38.7 Mbits/sec
}}}
__Five Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-60.0 sec 142 MBytes 19.9 Mbits/sec
[ 3] 0.0-60.2 sec 139 MBytes 19.4 Mbits/sec
[ 7] 0.0-60.4 sec 114 MBytes 15.9 Mbits/sec
[ 4] 0.0-60.4 sec 106 MBytes 14.7 Mbits/sec
[ 5] 0.0-61.0 sec 131 MBytes 18.0 Mbits/sec
[SUM] 0.0-61.0 sec 632 MBytes 87.1 Mbits/sec
}}}
__Ten Clients__
{{{
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-60.0 sec 60.0 MBytes 8.39 Mbits/sec
[ 12] 0.0-60.0 sec 83.5 MBytes 11.7 Mbits/sec
[ 3] 0.0-60.0 sec 83.5 MBytes 11.7 Mbits/sec
[ 4] 0.0-60.2 sec 43.5 MBytes 6.06 Mbits/sec
[ 6] 0.0-60.2 sec 44.8 MBytes 6.24 Mbits/sec
[ 7] 0.0-60.2 sec 65.0 MBytes 9.06 Mbits/sec
[ 8] 0.0-60.3 sec 73.6 MBytes 10.2 Mbits/sec
[ 10] 0.0-60.3 sec 52.1 MBytes 7.25 Mbits/sec
[ 9] 0.0-60.3 sec 82.4 MBytes 11.5 Mbits/sec
[ 11] 0.0-60.5 sec 81.2 MBytes 11.3 Mbits/sec
[SUM] 0.0-60.5 sec 670 MBytes 92.9 Mbits/sec
}}}
'''Iperf InstaGENI UCLA VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-60.0 sec 719 MBytes 101 Mbits/sec
[ 3] Sent 512782 datagrams
[ 3] Server Report:
[ 3] 0.0-60.0 sec 692 MBytes 96.8 Mbits/sec 0.099 ms 19123/512781 (3.7%)
[ 3] 0.0-60.0 sec 8 datagrams received out-of-order
}}}
'''Ping from InstaGENI UCLA VM to ExoGENI GPO VM '''
{{{
60 packets transmitted, 60 received, 0% packet loss, time 59081ms
rtt min/avg/max/mdev = 79.823/80.123/80.757/0.423 ms
}}}
== IG-ST-5 Site Information ==
Various pages include stitching information for a site. Each of the following were verified for this site:
1. Verified that stitching VLANs and Device URN information exists in the [http://groups.geni.net/geni/wiki/GeniAggregate/UCLAInstaGENI#GENINetworkStitching UCLA Aggregate] page.
2. Verified that Delegated GENI Stitching VLANs for site are documented at the [https://wiki.maxgigapop.net/twiki/bin/view/GENI/StaticNetworksView Delegated GENI Stitching VLANs].
3. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
4. TO BE Added site to the list of [wiki:GeniNetworkStitchingSites GENI Network Stitching Sites].
== IG-ST-6 New Site !OpenFlow topology ==
Create a slice and then create the stitched slivers using !OpenFlow with the RSPec [http://groups.geni.net/geni/browser/trunk/stitch-examples/UCLA/IG-ST-6.rspec IG-ST-6.rspec]:
{{{
$ stitcher.py createsliver IG-ST-6 IG-ST-6.rspec -o
09:35:04 INFO : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
09:35:04 INFO : Reading slice IG-ST-6 credential...
09:35:05 INFO : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6 expires on 2014-11-25 21:17:06 UTC
09:35:05 INFO : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
09:35:05 INFO : Calling SCS...
09:35:08 INFO : Multi-AM reservation will include resources from these aggregates:
09:35:08 INFO :
09:35:08 INFO :
09:35:08 INFO :
09:35:08 INFO :
09:35:08 INFO : Stitcher doing createsliver at ...
09:35:26 INFO : ... Allocation at complete.
09:35:26 INFO : Stitcher doing createsliver at ...
09:35:43 INFO : ... Allocation at complete.
09:35:43 INFO : Stitcher doing createsliver at ...
09:35:50 INFO : ... Allocation at complete.
09:35:50 INFO : Stitcher doing createsliver at ...
09:36:35 INFO : DCN AM : must wait for status ready....
09:36:35 INFO : Pausing 30 seconds to let circuit become ready...
09:37:12 INFO : Pausing 30 seconds to let circuit become ready...
09:37:50 INFO : DCN circuit 139451 is ready at
09:37:57 INFO : ... Allocation at complete.
09:37:57 INFO : All aggregates are complete.
09:37:57 INFO : Your resources expire at 2014-11-25T14:25:08 (UTC).
09:37:57 INFO : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/UCLA/IG-ST-6-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
}}}
Determined login information at each UCLA and GPO aggregate:
{{{
$ readyToLogin.py IG-ST-6 -a ucla-ig
....
ig-ucla's geni_status is: ready
User lnevers logs in to ig-ucla using:
ssh -p 31802 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.idre.ucla.edu
$ readyToLogin.py IG-ST-6 -a gpo-ig
....
ig-gpo's geni_status is: changing
User lnevers logs in to ig-gpo using:
ssh -p 35898 -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com
}}}
=== Measurements ===
'''Iperf InstaGENI GPO VM to InstaGENI UCLA VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-11-19''
__One Client_
{{{
}}}
__Five Clients__
{{{
}}}
__Ten Clients__
{{{
}}}
'''Iperf InstaGENI GPO VM to InstaGENI UCLA VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
}}}
'''Ping from InstaGENI GPO VM to InstaGENI UCLA VM '''
{{{
}}}
'''Iperf InstaGENI UCLA VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)'''
''Collected: 2014-11-19''
__One Client_
{{{
}}}
__Five Clients__
{{{
}}}
__Ten Clients__
{{{
}}}
'''Iperf InstaGENI UCLA VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default) '''
{{{
}}}
'''Ping from InstaGENI UCLA VM to InstaGENI GPO VM '''
{{{
}}}
-----
{{{
#!html
Email help@geni.net for GENI support or email me with feedback on this page!
}}}