wiki:GeniNetworkStitchingConfirmationTestStatus/UAF

Version 12 (modified by lnevers@bbn.com, 7 years ago) (diff)

--

University of Alaska Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

EG-ST-1 New Site to GPO IG topology

The UAF site advertises the following stitching details for the connection to AL2S.

    <ns2:stitching lastUpdateTime="Mon Apr 03 14:18:05 UTC 2017">
        <ns2:aggregate id="urn:publicid:IDN+exogeni.net:uafNet+authority+am" url="https://uaf-hn.exogeni.net:11443/orca/xmlrpc">
            <ns2:aggregatetype>orca</ns2:aggregatetype>
            <ns2:stitchingmode>tree</ns2:stitchingmode>
            <ns2:scheduledservices>true</ns2:scheduledservices>
            <ns2:negotiatedservices>false</ns2:negotiatedservices>
            <ns2:node id="urn:publicid:IDN+exogeni.net:uafNet+node+orca-transit-net-vlan">
                <ns2:port id="urn:publicid:IDN+exogeni.net:uafNet+stitchport+uafNet:IBM:G8264:TenGigabitEthernet:1:1:ethernet">
                    <ns2:capacity>1000000kbps</ns2:capacity>
                    <ns2:maximumReservableCapacity>1000000kbps</ns2:maximumReservableCapacity>
                    <ns2:link id="urn:publicid:IDN+exogeni.net:uafNet+interface+uafNet:IBM:G8264:TenGigabitEthernet:1:1:ethernet">
                        <ns2:remoteLinkId>urn:publicid:IDN+al2s.internet2.edu+interface+rtsw.seat.net.internet2.edu:et-4/3/0.0:uaf-eg</ns2:remoteLinkId>
                        <ns2:trafficEngineeringMetric>10</ns2:trafficEngineeringMetric>
                        <ns2:capacity>1000000kbps</ns2:capacity>
                        <ns2:maximumReservableCapacity>1000000kbps</ns2:maximumReservableCapacity>
                        <ns2:switchingCapabilityDescriptor>
                            <ns2:switchingcapType>l2sc</ns2:switchingcapType>
                            <ns2:encodingType>ethernet</ns2:encodingType>
                            <ns2:switchingCapabilitySpecificInfo>
                                <ns2:switchingCapabilitySpecificInfo_L2sc>
                                    <ns2:capability>consumer</ns2:capability>
                                    <ns2:vlanRangeAvailability>2341-2355</ns2:vlanRangeAvailability>
                                    <ns2:vlanTranslation>false</ns2:vlanTranslation>
                                </ns2:switchingCapabilitySpecificInfo_L2sc>
                            </ns2:switchingCapabilitySpecificInfo>
                        </ns2:switchingCapabilityDescriptor>
                    </ns2:link>
                </ns2:port>
            </ns2:node>
        </ns2:aggregate>
    </ns2:stitching>

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

Create a slice and then create the stitched slivers with the RSpec EG-ST-1.rspec:

$ stitcher createsliver EG-ST-1d -a gwu-eg EG-ST-1.rspec --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
09:21:00 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
09:21:00 INFO    : Reading slice EG-ST-1d credential...
09:21:00 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-1d expires on 2017-04-10 13:20:59 UTC
09:21:00 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
09:21:00 INFO    : Calling SCS...
09:21:01 INFO    : Multi-AM reservation will include resources from these aggregates:
09:21:01 INFO    : 	<Aggregate gpo-ig>
09:21:01 INFO    : 	<Aggregate al2s>
09:21:01 INFO    : 	<Aggregate uaf-eg>
09:21:01 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:21:35 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:21:35 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
09:21:48 INFO    : ... Allocation at <Aggregate uaf-eg> complete.
09:21:48 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
09:21:55 INFO    : ... Allocation at <Aggregate al2s> complete.
09:21:55 INFO    : All aggregates are complete.
09:21:55 INFO    : Your resources expire at 2017-04-09T13:11:01 (UTC). 
09:21:55 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UAF/EG-ST-1d-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-1d at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UAF EG and GPO IG aggregate:

$ readyToLogin.py EG-ST-1d --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 34362  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

eg-uaf's geni_status is: ready 
User lnevers logs in to eg-uaf using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@199.165.75.132

Measurements

Iperf InstaGENI GPO VM to ExoGENI UAF VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-03

One Client

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   214 MBytes  29.9 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   150 MBytes  20.9 Mbits/sec
[  3]  0.0-60.1 sec  91.1 MBytes  12.7 Mbits/sec
[  4]  0.0-60.2 sec   109 MBytes  15.2 Mbits/sec
[  7]  0.0-60.2 sec  98.6 MBytes  13.8 Mbits/sec
[  5]  0.0-60.2 sec   122 MBytes  17.0 Mbits/sec
[SUM]  0.0-60.2 sec   570 MBytes  79.4 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[ 10]  0.0-60.1 sec  59.4 MBytes  8.29 Mbits/sec
[  8]  0.0-60.1 sec  47.2 MBytes  6.60 Mbits/sec
[  5]  0.0-60.1 sec  75.0 MBytes  10.5 Mbits/sec
[ 12]  0.0-60.1 sec  54.1 MBytes  7.55 Mbits/sec
[  6]  0.0-60.2 sec  61.8 MBytes  8.61 Mbits/sec
[ 11]  0.0-60.2 sec  71.2 MBytes  9.93 Mbits/sec
[  9]  0.0-60.3 sec  70.1 MBytes  9.75 Mbits/sec
[  4]  0.0-60.4 sec  55.1 MBytes  7.66 Mbits/sec
[  3]  0.0-60.5 sec  60.6 MBytes  8.41 Mbits/sec
[  7]  0.0-60.5 sec  60.9 MBytes  8.44 Mbits/sec
[SUM]  0.0-60.5 sec   616 MBytes  85.3 Mbits/sec

Iperf InstaGENI GPO VM to ExoGENI UAF VM (UDP) - UDP buffer size: 208 KByte (default)

[  3] Server Report:
[  3]  0.0-60.0 sec   665 MBytes  93.0 Mbits/sec   0.086 ms 38437/512796 (7.5%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from InstaGENI GPO VM to the ExoGENI UAF VM

60 packets transmitted, 60 received, 0% packet loss, time 59088ms
rtt min/avg/max/mdev = 107.557/107.957/108.488/0.444 ms

Iperf ExoGENI UAF VM to GPO InstaGENI VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   510 MBytes  71.2 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec   133 MBytes  18.6 Mbits/sec
[  7]  0.0-60.1 sec   104 MBytes  14.6 Mbits/sec
[  5]  0.0-60.2 sec   150 MBytes  20.9 Mbits/sec
[  3]  0.0-60.2 sec   109 MBytes  15.2 Mbits/sec
[  4]  0.0-60.5 sec   155 MBytes  21.5 Mbits/sec
[SUM]  0.0-60.5 sec   651 MBytes  90.3 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  63.4 MBytes  8.85 Mbits/sec
[  4]  0.0-60.1 sec  65.9 MBytes  9.20 Mbits/sec
[  3]  0.0-60.1 sec  56.4 MBytes  7.87 Mbits/sec
[  7]  0.0-60.1 sec  67.2 MBytes  9.38 Mbits/sec
[  9]  0.0-60.2 sec  72.4 MBytes  10.1 Mbits/sec
[  6]  0.0-60.2 sec  70.9 MBytes  9.87 Mbits/sec
[ 11]  0.0-60.2 sec  51.6 MBytes  7.19 Mbits/sec
[ 10]  0.0-60.3 sec  61.9 MBytes  8.61 Mbits/sec
[  8]  0.0-60.3 sec  70.0 MBytes  9.74 Mbits/sec
[ 12]  0.0-60.4 sec  59.5 MBytes  8.26 Mbits/sec
[SUM]  0.0-60.4 sec   639 MBytes  88.8 Mbits/sec

Iperf ExoGENI UAF VM to GPO InstaGENI VM (UDP) - UDP buffer size: 208 KByte (default)

[  3]  0.0-60.0 sec   664 MBytes  92.9 Mbits/sec   0.019 ms 38904/512820 (7.6%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI UAF VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59090ms
rtt min/avg/max/mdev = 107.748/108.128/112.406/0.775 ms

EG-ST-2 New Site to GPO IG Loop topology

Create a slice and then create the stitched slivers with the RSpec EG-ST-2.rspec:

$ stitcher.py createsliver EG-ST-2 EG-ST-2.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
11:34:56 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
11:34:56 INFO    : Reading slice EG-ST-2 credential...
11:34:56 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-2 expires on 2017-05-29 14:19:51 UTC
11:34:56 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
11:34:56 INFO    : Calling SCS...
11:34:57 INFO    : Multi-AM reservation will include resources from these aggregates:
11:34:57 INFO    : 	<Aggregate gpo-ig>
11:34:57 INFO    : 	<Aggregate al2s>
11:34:57 INFO    : 	<Aggregate uaf-eg>
11:34:57 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:35:15 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:35:15 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
11:35:31 INFO    : ... Allocation at <Aggregate uaf-eg> complete.
11:35:31 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:35:34 ERROR   :  {'output': 'Exception: requested VLAN unavailable: rtsw.seat.net.internet2.edu,et-4/3/0.0 VLAN=2350', 'code': {'geni_code': 24}}
11:35:34 WARNING : Stitching failed but will retry: Circuit reservation failed at <Aggregate al2s>. Try again from the SCS. (Error: Topology too complex for local redo - ask Stitching Service to find a VLAN tag (AMAPIError: Error from Aggregate: code 24: Exception: requested VLAN unavailable: rtsw.seat.net.internet2.edu,et-4/3/0.0 VLAN=2350.))
11:35:34 INFO    : Deleting existing reservations...
11:35:34 INFO    : Doing deletesliver at <Aggregate gpo-ig>...
11:35:36 INFO    : Deleted reservation at <Aggregate gpo-ig>.
11:35:36 INFO    : Doing deletesliver at <Aggregate uaf-eg>...
11:35:44 INFO    : Deleted reservation at <Aggregate uaf-eg>.
11:35:44 INFO    : Calling SCS for the 2nd time...
11:35:44 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


11:36:14 INFO    : Multi-AM reservation will include resources from these aggregates:
11:36:14 INFO    : 	<Aggregate gpo-ig>
11:36:14 INFO    : 	<Aggregate al2s>
11:36:14 INFO    : 	<Aggregate uaf-eg>
11:36:14 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:36:33 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:36:33 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
11:36:49 INFO    : ... Allocation at <Aggregate uaf-eg> complete.
11:36:49 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
11:37:02 INFO    : ... Allocation at <Aggregate al2s> complete.
11:37:02 INFO    : All aggregates are complete.
11:37:02 INFO    : Your resources expire at 2017-05-28T15:26:14 (UTC). 
11:37:02 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UAF/EG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each UAF and GPO aggregate:

$ readyToLogin.py EG-ST-2 --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25106  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.gpolab.bbn.com

eg-uaf's geni_status is: ready 
User lnevers logs in to eg-uaf using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@199.165.75.132

Login to GPO host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

lnevers@ig-gpo:~$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59102ms
rtt min/avg/max/mdev = 107.702/109.704/215.966/13.844 ms
lnevers@ig-gpo:~$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59105ms
rtt min/avg/max/mdev = 107.672/109.654/215.772/13.822 ms
lnevers@ig-gpo:~$ 

EG-ST-3 EG-ST-3 New Site 3 node linear topology

Create a slice and then create the stitched slivers with the RSpec EG-ST-3.rspec:

$ stitcher.py createsliver EG-ST-3b EG-ST-3.rspec -o --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc
12:19:32 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
12:19:32 INFO    : Reading slice EG-ST-3b credential...
12:19:32 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-3b expires on 2017-05-29 16:19:31 UTC
12:19:32 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
12:19:32 INFO    : Calling SCS...
12:19:33 INFO    : Multi-AM reservation will include resources from these aggregates:
12:19:33 INFO    : 	<Aggregate sox-ig>
12:19:33 INFO    : 	<Aggregate gpo-ig>
12:19:33 INFO    : 	<Aggregate al2s>
12:19:33 INFO    : 	<Aggregate uaf-eg>
12:19:33 INFO    : Stitcher doing createsliver at <Aggregate sox-ig>...
12:20:06 INFO    : ... Allocation at <Aggregate sox-ig> complete.
12:20:06 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
12:20:24 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
12:20:25 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
12:20:41 INFO    : ... Allocation at <Aggregate uaf-eg> complete.
12:20:41 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:20:55 INFO    : ... Allocation at <Aggregate al2s> complete.
12:20:55 INFO    : All aggregates are complete.
12:20:55 INFO    : Your resources expire at 2017-05-28T16:09:33 (UTC). 
12:20:55 INFO    : Saved combined reservation RSpec at 4 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UAF/EG-ST-3b-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-3b at 4 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the UAF host:

$ readyToLogin.py EG-ST-3b --useSliceAggregates
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 25138  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

ig-sox's geni_status is: ready 
User lnevers logs in to ig-sox using:
	ssh -p 25010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.sox.net

eg-uaf's geni_status is: ready 
User lnevers logs in to eg-uaf using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@199.165.75.132

Login to the UAF host and ping each remote:

lnevers@eg-uaf:~$ #ping GPO IG 
lnevers@eg-uaf:~$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59096ms
rtt min/avg/max/mdev = 107.671/109.699/216.082/13.851 ms
lnevers@eg-uaf:~$ # Sox IG
lnevers@eg-uaf:~$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59103ms
rtt min/avg/max/mdev = 98.624/100.407/197.826/12.684 ms
lnevers@eg-uaf:~$ 

EG-ST-4 New Site to GPO EG interoperability

Create a slice and then create the stitched slivers with the RSpec EG-ST-4.rspec, which specifies a 100 Mbps link capacity. This was done to get around the mismatch in link capacity units that exists between IG and EG.

$ stitcher createsliver EG-ST-4d EG-ST-4.rspec --scsURL https://nutshell.maxgigapop.net:8443/geni/xmlrpc --noExoSM
12:35:46 INFO    : Configured logging from file /home/lnevers/geni-tools-2.10/src/gcf/stitcher_logging.conf
12:35:46 INFO    : Requested to use GENI stitching instead of ExoGENI stitching
12:35:46 INFO    : Reading slice EG-ST-4d credential...
12:35:47 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4d expires on 2017-04-10 15:32:36 UTC
12:35:47 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
12:35:47 INFO    : Calling SCS...
12:35:48 INFO    : Multi-AM reservation will include resources from these aggregates:
12:35:48 INFO    : 	<Aggregate al2s>
12:35:48 INFO    : 	<Aggregate gpo-eg>
12:35:48 INFO    : 	<Aggregate uaf-eg>
12:35:48 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
12:35:59 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/a1e6722b-54d9-4a7b-820f-7c8b0002c367#/2848e7aa-baca-43da-a6b2-5c3371491587.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
12:35:59 INFO    : Got an error reserving resources in EG-ST-4d at <Aggregate gpo-eg>
12:36:01 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4d at gpo-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4d among active slices.
12:36:01 INFO    : Will put <Aggregate gpo-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate gpo-eg> 2nd time with new suggested VLANs
12:36:01 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


12:36:31 INFO    : Stitcher doing createsliver at <Aggregate gpo-eg>...
12:36:40 INFO    : ... Allocation at <Aggregate gpo-eg> complete.
12:36:40 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
12:36:52 ERROR   :  {'output': 'ERROR: Embedding workflow ERROR: 1:Error in building the dependency tree, probably not available vlan path OR trying to reuse a stitching tag:http://geni-orca.renci.org/owl/921ddd2b-595d-4aee-9eef-0abe4ddb70b8#/50094e08-66bb-4c08-80d2-ee81ac40d701.\n Please see https://geni-orca.renci.org/trac/wiki/orca-errors for possible solutions.', 'code': {'geni_code': 2}}
12:36:52 INFO    : Got an error reserving resources in EG-ST-4d at <Aggregate uaf-eg>
12:37:00 WARNING : Failed to delete sliver urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4d at uaf-eg (got result 'None'). Error from Aggregate: code 12: ERROR: unable to find slice urn:publicid:IDN+ch.geni.net:ln-test+slice+EG-ST-4d among active slices.
12:37:00 INFO    : Will put <Aggregate uaf-eg> back in the pool to allocate. Got: VLAN was unavailable. Retry <Aggregate uaf-eg> 2nd time with new suggested VLANs
12:37:00 INFO    : Pausing for 30 seconds for Aggregates to free up resources...


12:37:30 INFO    : Stitcher doing createsliver at <Aggregate uaf-eg>...
12:37:43 INFO    : ... Allocation at <Aggregate uaf-eg> complete.
12:37:43 INFO    : Stitcher doing createsliver at <Aggregate al2s>...
12:37:51 INFO    : ... Allocation at <Aggregate al2s> complete.
12:37:51 INFO    : All aggregates are complete.
12:37:51 INFO    : Your resources expire at 2017-04-09T16:26:31 (UTC). 
12:37:51 INFO    : Saved combined reservation RSpec at 3 AM(s) to file '/home/lnevers/gcf-test/stitch-test/UAF/EG-ST-4d-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice EG-ST-4d at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each UAF and GPO aggregate:

$ readyToLogin.py EG-ST-4d --useSliceAggregates

eg-gpo's geni_status is: ready 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.14

eg-uaf's geni_status is: ready 
User lnevers logs in to eg-uaf using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@199.165.75.132

Measurements

Iperf ExoGENI GPO VM to ExoGENI UAF VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   192 MBytes  26.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   143 MBytes  19.9 Mbits/sec
[  6]  0.0-60.0 sec   126 MBytes  17.6 Mbits/sec
[  4]  0.0-60.2 sec   114 MBytes  15.9 Mbits/sec
[  5]  0.0-60.2 sec  84.4 MBytes  11.8 Mbits/sec
[  7]  0.0-60.2 sec   176 MBytes  24.5 Mbits/sec
[SUM]  0.0-60.2 sec   643 MBytes  89.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  65.8 MBytes  9.19 Mbits/sec
[  8]  0.0-60.0 sec  50.6 MBytes  7.07 Mbits/sec
[ 12]  0.0-60.0 sec   108 MBytes  15.1 Mbits/sec
[  6]  0.0-60.1 sec  71.4 MBytes  9.96 Mbits/sec
[  7]  0.0-60.1 sec  66.1 MBytes  9.23 Mbits/sec
[  3]  0.0-60.1 sec  69.4 MBytes  9.68 Mbits/sec
[  9]  0.0-60.3 sec  72.8 MBytes  10.1 Mbits/sec
[ 11]  0.0-60.3 sec  46.5 MBytes  6.47 Mbits/sec
[  5]  0.0-60.4 sec  47.1 MBytes  6.54 Mbits/sec
[ 10]  0.0-60.6 sec  60.0 MBytes  8.31 Mbits/sec
[SUM]  0.0-60.6 sec   658 MBytes  91.1 Mbits/sec

Iperf ExoGENI GPO VM to ExoGENI UAF VM (UDP) - UDP buffer size: 208 KByte (default)

[  3] Server Report:
[  3]  0.0-60.0 sec   667 MBytes  93.3 Mbits/sec   0.003 ms 37021/512820 (7.2%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI GPO VM to the ExoGENI UAF VM

60 packets transmitted, 60 received, 0% packet loss, time 59103ms
rtt min/avg/max/mdev = 107.559/107.822/109.384/0.310 ms

Iperf ExoGENI UAF VM to ExoGENI GPO VM (TCP) - TCP window size: 85.0 KByte (default)

Collected: 2017-04-03

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   195 MBytes  27.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  5]  0.0-60.0 sec  93.4 MBytes  13.0 Mbits/sec
[  6]  0.0-60.1 sec   149 MBytes  20.9 Mbits/sec
[  3]  0.0-60.1 sec   160 MBytes  22.4 Mbits/sec
[  4]  0.0-60.1 sec   120 MBytes  16.8 Mbits/sec
[  7]  0.0-60.1 sec   118 MBytes  16.4 Mbits/sec
[SUM]  0.0-60.1 sec   641 MBytes  89.5 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec  62.6 MBytes  8.75 Mbits/sec
[  7]  0.0-60.1 sec  63.6 MBytes  8.89 Mbits/sec
[  9]  0.0-60.1 sec  58.8 MBytes  8.20 Mbits/sec
[  5]  0.0-60.1 sec  74.4 MBytes  10.4 Mbits/sec
[  6]  0.0-60.1 sec  79.4 MBytes  11.1 Mbits/sec
[ 10]  0.0-60.2 sec  43.0 MBytes  5.99 Mbits/sec
[  4]  0.0-60.3 sec  69.4 MBytes  9.66 Mbits/sec
[ 12]  0.0-60.2 sec  85.4 MBytes  11.9 Mbits/sec
[  8]  0.0-60.3 sec  62.0 MBytes  8.63 Mbits/sec
[ 11]  0.0-60.5 sec  46.5 MBytes  6.45 Mbits/sec
[SUM]  0.0-60.5 sec   645 MBytes  89.5 Mbits/sec

Iperf ExoGENI UAF VM to ExoGENI GPO VM (UDP) - UDP buffer size: 208 KByte (default)

[  3] Server Report:
[  3]  0.0-60.0 sec   666 MBytes  93.2 Mbits/sec   0.009 ms 37397/512820 (7.3%)
[  3]  0.0-60.0 sec  1 datagrams received out-of-order

Ping from ExoGENI UAF VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59106ms
rtt min/avg/max/mdev = 107.552/107.829/109.345/0.475 ms