wiki:GeniNetworkStitchingConfirmationTestStatus/Stanford

Stanford University Stitching Confirmation Tests

This pages capture the detailed test logs for each test defined in the New Site Stitching Confirmation Tests page. For the sites status see the New Site Stitching Confirmation Tests Status page.

IG-ST-1 New Site to GPO IG topology

The Stanford site advertises the following stitching details:

  <stitching lastUpdateTime="2014-01-29T19:10:48Z" xmlns="http://hpn.east.isi.edu/rspec/ext/stitch/0.1/">    
    <aggregate id="urn:publicid:IDN+instageni.stanford.edu+authority+cm" url="https://www.instageni.stanford.edu:12369/protogeni/xmlrpc/am">      
      <aggregatetype>        protogeni      </aggregatetype>      
      <stitchingmode>        chainANDTree      </stitchingmode>      
      <scheduledservices>        false      </scheduledservices>      
      <negotiatedservices>        false      </negotiatedservices>      
      <lifetime id="life">        
            <start type="time">          2014-01-29T19:10:48Z        </start>        
            <end type="time">          2014-01-29T19:10:48Z        </end>        
      </lifetime>      
      <node id="urn:publicid:IDN+instageni.stanford.edu+node+procurve2">        
          <port id="urn:publicid:IDN+instageni.stanford.edu+stitchport+procurve2:1.24.ion.salt.xe-0_1_1">          
              <capacity>            1000000          </capacity>          
              <maximumReservableCapacity>            1000000          </maximumReservableCapacity>          
              <minimumReservableCapacity>            1000          </minimumReservableCapacity>          
              <granularity>            1          </granularity>          
              <link id="urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1">            
                  <remoteLinkId> urn:publicid:IDN+ion.internet2.edu+interface+rtr.salt:xe-0/1/1:stanford-ig </remoteLinkId>            
                  <trafficEngineeringMetric>              10            </trafficEngineeringMetric>            
                  <capacity>              1000000            </capacity>            
                  <maximumReservableCapacity>              1000000         </maximumReservableCapacity>            
                  <minimumReservableCapacity>              1000            </minimumReservableCapacity>            
                  <granularity>              1            </granularity>            
                  <switchingCapabilityDescriptor>              
                     <switchingcapType>                l2sc              </switchingcapType>              
                     <encodingType>                ethernet              </encodingType>              
                     <switchingCapabilitySpecificInfo>                
                        <switchingCapabilitySpecificInfo_L2sc>                  
                           <interfaceMTU>                    9000                  </interfaceMTU>                  
                           <vlanRangeAvailability>          1630-1639              </vlanRangeAvailability>                  
                           <vlanTranslation>                    false              </vlanTranslation>                  
                        </switchingCapabilitySpecificInfo_L2sc>                
                     </switchingCapabilitySpecificInfo>              
                  </switchingCapabilityDescriptor>            
              </link>          
          </port>        
      </node>      
    </aggregate>    
  </stitching>  

Experimenter may not need any of this data, but it is helpful to reference when trying to determine how many VLANs are delegated for stitching at the site or how much bandwidth can be requested.

ION Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-ion.rspec:

$ omni.py createslice IG-ST-1
12:36:03 INFO     omni: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:36:03 INFO     omni: Loading config file /home/lnevers/.gcf/omni_config
12:36:03 INFO     omni: Using control framework portal
12:36:04 INFO     omni: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2014-02-13 17:36:04
12:36:04 INFO     omni:  ------------------------------------------------------
12:36:04 INFO     omni:  Completed createslice:
Args: createslice IG-ST-1
  Result Summary: Created slice with Name IG-ST-1, URN urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1, Expiration 2014-02-13 17:36:04 
12:36:04 INFO     omni:  ======================================================

$ stitcher.py createsliver IG-ST-1 IG-ST-1-ion.rspec -o
12:36:14 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
12:36:14 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
12:36:14 INFO     stitcher: Using control framework portal
12:36:15 INFO     stitcher: Checking that slice IG-ST-1 is valid...
12:36:15 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-1 expires on 2014-02-13 17:36:04 UTC
12:36:19 INFO     stitcher: Stitched reservation will include resources from these aggregates:
12:36:19 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm>
12:36:19 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
12:36:19 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
12:36:19 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-stanford-edu.xml'
12:36:19 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.stanford.edu:12369/protogeni/xmlrpc/am
12:36:36 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> complete.
12:36:36 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-instageni-gpolab-bbn-com.xml'
12:36:36 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
12:36:52 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
12:36:52 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-1-createsliver-request-11-ion-internet2-edu.xml'
12:36:52 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
12:37:36 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
12:37:36 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:38:14 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
12:38:50 INFO     stitch.Aggregate: DCN circuit 64111 is ready
12:38:57 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
12:38:57 INFO     stitch.launcher: All aggregates are complete.
12:38:57 INFO     stitcher: Writing to 'IG-ST-1-manifest-rspec-stitching-combined.xml'
12:38:57 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-1-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-1 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 link(s).

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a stanford-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.stanford.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-stan's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-stan using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.stanford.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2014-02-06

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   356 MBytes  49.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   143 MBytes  19.9 Mbits/sec
[  4]  0.0-60.0 sec   156 MBytes  21.9 Mbits/sec
[  5]  0.0-60.2 sec   134 MBytes  18.7 Mbits/sec
[  7]  0.0-60.2 sec   136 MBytes  19.0 Mbits/sec
[  6]  0.0-60.2 sec   135 MBytes  18.8 Mbits/sec
[SUM]  0.0-60.2 sec   704 MBytes  98.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  54.0 MBytes  7.54 Mbits/sec
[ 11]  0.0-60.1 sec  81.9 MBytes  11.4 Mbits/sec
[  5]  0.0-60.1 sec  81.0 MBytes  11.3 Mbits/sec
[  4]  0.0-60.2 sec  81.0 MBytes  11.3 Mbits/sec
[  9]  0.0-60.2 sec  78.1 MBytes  10.9 Mbits/sec
[  7]  0.0-60.3 sec  76.8 MBytes  10.7 Mbits/sec
[ 10]  0.0-60.3 sec  70.1 MBytes  9.75 Mbits/sec
[  8]  0.0-60.4 sec  53.9 MBytes  7.49 Mbits/sec
[  3]  0.0-60.4 sec  54.6 MBytes  7.58 Mbits/sec
[ 12]  0.0-60.5 sec  83.8 MBytes  11.6 Mbits/sec
[SUM]  0.0-60.5 sec   715 MBytes  99.2 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-59.9 sec   698 MBytes  97.7 Mbits/sec   0.021 ms 14981/512820 (2.9%)
[  3]  0.0-59.9 sec  2 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI Stanford VM

60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 100.221/100.262/100.383/0.357 ms

Iperf InstaGENI Stanford VM to GPO InstaGENI VM (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2014-02-06

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   349 MBytes  48.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec   137 MBytes  19.1 Mbits/sec
[  6]  0.0-60.1 sec   146 MBytes  20.4 Mbits/sec
[  4]  0.0-60.1 sec   145 MBytes  20.3 Mbits/sec
[  3]  0.0-60.1 sec   139 MBytes  19.3 Mbits/sec
[  5]  0.0-60.2 sec   139 MBytes  19.3 Mbits/sec
[SUM]  0.0-60.2 sec   705 MBytes  98.3 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  78.2 MBytes  10.9 Mbits/sec
[ 10]  0.0-60.1 sec  80.9 MBytes  11.3 Mbits/sec
[  3]  0.0-60.1 sec  78.5 MBytes  11.0 Mbits/sec
[  8]  0.0-60.1 sec  77.2 MBytes  10.8 Mbits/sec
[ 11]  0.0-60.1 sec  74.8 MBytes  10.4 Mbits/sec
[  5]  0.0-60.2 sec  53.4 MBytes  7.44 Mbits/sec
[  7]  0.0-60.3 sec  53.8 MBytes  7.48 Mbits/sec
[ 12]  0.0-60.3 sec  54.0 MBytes  7.51 Mbits/sec
[  6]  0.0-60.4 sec  84.2 MBytes  11.7 Mbits/sec
[  9]  0.0-60.4 sec  77.8 MBytes  10.8 Mbits/sec
[SUM]  0.0-60.4 sec   713 MBytes  98.9 Mbits/sec

Iperf InstaGENI Stanford VM to GPO InstaGENI VM (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-59.9 sec   700 MBytes  98.0 Mbits/sec   0.096 ms 13684/512820 (2.7%)
[  3]  0.0-59.9 sec  2 datagrams received out-of-order

Ping from InstaGENI Stanford VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 100.234/100.265/100.319/0.370 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-1-al2s.rspec:

$ stitcher.py createsliver IG-ST-1 IG-ST-1-al2s.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 -o
11:07:48 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
11:07:48 INFO    : Reading slice IG-ST-1 credential...
11:07:48 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-1 expires on 2015-01-12 15:59:59 UTC
11:07:48 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:07:48 INFO    : Calling SCS...
11:07:50 INFO    : Multi-AM reservation will include resources from these aggregates:
11:07:50 INFO    : 	<Aggregate stanford-ig>
11:07:50 INFO    : 	<Aggregate gpo-ig>
11:07:50 INFO    : 	<Aggregate oess>
11:07:50 INFO    : 	<Aggregate ion>
11:07:50 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
11:08:34 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
11:08:35 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:08:50 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:08:50 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:08:55 INFO    : ... Allocation at <Aggregate oess> complete.
11:08:55 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:09:41 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:09:41 INFO    : Pausing 30 seconds to let circuit become ready...
11:10:19 INFO    : Pausing 30 seconds to let circuit become ready...
11:10:56 INFO    : DCN circuit 145841 is ready at <Aggregate ion>
11:11:03 INFO    : ... Allocation at <Aggregate ion> complete.
11:11:03 INFO    : All aggregates are complete.
11:11:03 INFO    : Your resources expire at 2015-01-11T15:57:50 (UTC). 
11:11:03 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Stanford/IG-ST-1-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-1 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).
$ 

Note: Could not get bare metal executed test with Xen VMs.

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-1 -a stanford-ig
  ....
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc3.instageni.stanford.edu

$ readyToLogin.py IG-ST-1 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com


Measurements

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   154 MBytes  21.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   141 MBytes  19.8 Mbits/sec
[  6]  0.0-60.0 sec   141 MBytes  19.7 Mbits/sec
[  7]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec
[  5]  0.0-60.1 sec   142 MBytes  19.9 Mbits/sec
[  4]  0.0-60.1 sec   142 MBytes  19.8 Mbits/sec
[SUM]  0.0-60.1 sec   707 MBytes  98.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.0 sec  71.6 MBytes  10.0 Mbits/sec
[ 11]  0.0-60.0 sec  71.1 MBytes  9.94 Mbits/sec
[  9]  0.0-60.0 sec  71.5 MBytes  9.99 Mbits/sec
[ 12]  0.0-60.0 sec  71.2 MBytes  9.95 Mbits/sec
[  5]  0.0-60.1 sec  71.5 MBytes  9.98 Mbits/sec
[  7]  0.0-60.1 sec  71.1 MBytes  9.93 Mbits/sec
[  3]  0.0-60.2 sec  72.4 MBytes  10.1 Mbits/sec
[  4]  0.0-60.2 sec  70.5 MBytes  9.83 Mbits/sec
[ 10]  0.0-60.3 sec  71.2 MBytes  9.92 Mbits/sec
[  8]  0.0-60.3 sec  71.4 MBytes  9.93 Mbits/sec
[SUM]  0.0-60.3 sec   714 MBytes  99.3 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512809 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   677 MBytes  94.7 Mbits/sec   0.109 ms 29612/512808 (5.8%)
[  3]  0.0-60.0 sec  2 datagrams received out-of-order

Ping from InstaGENI GPO VM to the InstaGENI Stanford VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 75.265/75.857/78.672/0.661 ms

Iperf InstaGENI Stanford VM to GPO InstaGENI VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-05

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.1 sec   156 MBytes  21.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   141 MBytes  19.7 Mbits/sec
[  6]  0.0-60.0 sec   140 MBytes  19.6 Mbits/sec
[  5]  0.0-60.1 sec   139 MBytes  19.4 Mbits/sec
[  4]  0.0-60.1 sec   141 MBytes  19.6 Mbits/sec
[  7]  0.0-60.1 sec   138 MBytes  19.3 Mbits/sec
[SUM]  0.0-60.1 sec   700 MBytes  97.6 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  9]  0.0-60.0 sec  69.9 MBytes  9.77 Mbits/sec
[  7]  0.0-60.0 sec  70.9 MBytes  9.91 Mbits/sec
[ 11]  0.0-60.1 sec  69.9 MBytes  9.76 Mbits/sec
[  6]  0.0-60.1 sec  70.9 MBytes  9.89 Mbits/sec
[  5]  0.0-60.2 sec  71.1 MBytes  9.92 Mbits/sec
[  8]  0.0-60.2 sec  71.1 MBytes  9.92 Mbits/sec
[  4]  0.0-60.2 sec  71.1 MBytes  9.92 Mbits/sec
[  3]  0.0-60.3 sec  71.1 MBytes  9.90 Mbits/sec
[ 12]  0.0-60.3 sec  71.1 MBytes  9.90 Mbits/sec
[ 10]  0.0-60.3 sec  70.1 MBytes  9.76 Mbits/sec
[SUM]  0.0-60.3 sec   707 MBytes  98.4 Mbits/sec

Iperf InstaGENI Stanford VM to GPO InstaGENI VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512777 datagrams
[  3] Server Report:
[  3]  0.0-60.0 sec   690 MBytes  96.4 Mbits/sec   0.101 ms 20911/512776 (4.1%)
[  3]  0.0-60.0 sec  10 datagrams received out-of-order

Ping from InstaGENI Stanford VM to GPO InstaGENI VM

60 packets transmitted, 60 received, 0% packet loss, time 59098ms
rtt min/avg/max/mdev = 75.263/76.108/83.257/1.346 ms

IG-ST-2 New Site to GPO IG Loop topology

ION Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec -o
10:25:50 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:25:50 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
10:25:50 INFO     stitcher: Using control framework portal
10:25:51 INFO     stitcher: Checking that slice IG-ST-2 is valid...
10:25:51 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-2 expires on 2014-02-05 19:19:45 UTC
10:25:52 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> speaks AM API v3, but sticking with v2
10:25:53 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
10:25:53 INFO     stitcher: Stitched reservation will include resources from these aggregates:
10:25:53 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm>
10:25:53 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
10:25:53 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
10:25:53 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-stanford-edu.xml'
10:25:53 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.stanford.edu:12369/protogeni/xmlrpc/am
10:26:11 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> complete.
10:26:11 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-instageni-gpolab-bbn-com.xml'
10:26:11 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:26:24 ERROR    omni:  {'output': "vlan tag 3732 for 'link1' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+0d50801c0811b792b7188f35fb5a91ac', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=0d50801c0811b792b7188f35fb5a91ac'}, 'value': 0}
10:26:24 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3732 for 'link1' not available.
10:26:24 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24.ion.newy.ae0' on path u'link1'> new suggested 3720 (not 3732)
10:26:24 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


10:26:54 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-12-instageni-gpolab-bbn-com.xml'
10:26:54 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:27:06 ERROR    omni:  {'output': "vlan tag 3720 for 'link1' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+1311eea9d7985b88d6c4e61a3ca82dcd', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=1311eea9d7985b88d6c4e61a3ca82dcd'}, 'value': 0}
10:27:06 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-2 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3720 for 'link1' not available.
10:27:06 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 3th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24.ion.newy.ae0' on path u'link1'> new suggested 3718 (not 3720)
10:27:06 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


10:27:36 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-13-instageni-gpolab-bbn-com.xml'
10:27:36 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:27:51 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
10:27:51 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-2-createsliver-request-11-ion-internet2-edu.xml'
10:27:51 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
10:28:34 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
10:28:34 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:29:11 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
10:29:48 INFO     stitch.Aggregate: DCN circuit 62651 is ready
10:29:48 INFO     stitch.Aggregate: DCN circuit 62641 is ready
10:29:55 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
10:29:55 INFO     stitch.launcher: All aggregates are complete.
10:29:55 INFO     stitcher: Writing to 'IG-ST-2-manifest-rspec-stitching-combined.xml'
10:29:55 INFO     stitcher: Saved combined reservation RSpec at 3 AMs to file IG-ST-2-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-2 at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a stanford-ig
  ....
================================================================================
LOGIN INFO for AM: https://instageni.stanford.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-stan's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-stan using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.stanford.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
================================================================================
LOGIN INFO for AM: https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am/2.0
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-gpo using:
	ssh -p 32058  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to each host and ping the remote on each of the two interfaces. Below is the ping output for the GPO site:

[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59069ms
rtt min/avg/max/mdev = 100.232/100.317/100.480/0.035 ms
[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59077ms
rtt min/avg/max/mdev = 100.261/100.347/100.518/0.414 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-2.rspec:

$ stitcher.py createsliver IG-ST-2 IG-ST-2.rspec --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 -o
11:58:09 INFO    : Configured logging from file /home/lnevers/gcf-2.7/src/gcf/stitcher_logging.conf
11:58:10 INFO    : Reading slice IG-ST-2 credential...
11:58:10 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-2 expires on 2015-01-12 15:38:58 UTC
11:58:10 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
11:58:10 INFO    : Calling SCS...
11:58:13 INFO    : Multi-AM reservation will include resources from these aggregates:
11:58:13 INFO    : 	<Aggregate stanford-ig>
11:58:13 INFO    : 	<Aggregate gpo-ig>
11:58:13 INFO    : 	<Aggregate oess>
11:58:13 INFO    : 	<Aggregate ion>
11:58:13 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
11:58:34 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
11:58:34 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:58:50 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:58:50 INFO    : Stitcher doing createsliver at <Aggregate oess>...
11:58:58 INFO    : ... Allocation at <Aggregate oess> complete.
11:58:58 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:59:44 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:59:44 INFO    : Pausing 30 seconds to let circuit become ready...
12:00:21 INFO    : Pausing 30 seconds to let circuit become ready...
12:00:59 INFO    : DCN circuit 145871 is ready at <Aggregate ion>
12:00:59 INFO    : DCN circuit 145861 is ready at <Aggregate ion>
12:01:06 INFO    : ... Allocation at <Aggregate ion> complete.
12:01:06 INFO    : All aggregates are complete.
12:01:06 INFO    : Your resources expire at 2015-01-11T16:48:13 (UTC). 
12:01:06 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Stanford/IG-ST-2-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-2 at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-2 -a stanford-ig
  ....
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 30010  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.stanford.edu

$ readyToLogin.py IG-ST-2 -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 31034  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.gpolab.bbn.com

Login to GPO host and ping the remote on each of the two interfaces:

[lnevers@ig-gpo ~]$ ping 10.10.4.2 -c 60 -q
PING 10.10.4.2 (10.10.4.2) 56(84) bytes of data.

--- 10.10.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59031ms
rtt min/avg/max/mdev = 74.695/76.269/151.103/9.745 ms

[lnevers@ig-gpo ~]$ ping 192.168.4.2 -c 60 -q
PING 192.168.4.2 (192.168.4.2) 56(84) bytes of data.

--- 192.168.4.2 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59088ms
rtt min/avg/max/mdev = 74.699/76.349/153.161/10.007 ms

IG-ST-3 IG-ST-3 New Site 3 node linear topology

ION Tests

Create a slice and then create the stitched slivers with the RSPec IG-ST-3.rspec:

$ stitcher.py createsliver IG-ST-3 IG-ST-3.rspec -o
10:57:29 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
10:57:29 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
10:57:29 INFO     stitcher: Using control framework portal
10:57:29 INFO     stitcher: Checking that slice IG-ST-3 is valid...
10:57:30 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-3 expires on 2014-02-10 15:42:49 UTC
10:57:31 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> speaks AM API v3, but sticking with v2
10:57:32 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> speaks AM API v3, but sticking with v2
10:57:32 INFO     stitcher: <Aggregate urn:publicid:IDN+emulab.net+authority+cm> speaks AM API v3, but sticking with v2
10:57:33 INFO     stitcher: <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> speaks AM API v3, but sticking with v2
10:57:33 INFO     stitcher: Stitched reservation will include resources from these aggregates:
10:57:33 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm>
10:57:33 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
10:57:33 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>
10:57:33 INFO     stitcher: 	<Aggregate urn:publicid:IDN+emulab.net+authority+cm>
10:57:33 INFO     stitcher: 	<Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm>
10:57:33 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-stanford-edu.xml'
10:57:33 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.stanford.edu:12369/protogeni/xmlrpc/am
10:57:50 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> complete.
10:57:50 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-instageni-gpolab-bbn-com.xml'
10:57:50 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:58:02 ERROR    omni:  {'output': "vlan tag 3732 for 'link' not available", 'code': {'protogeni_error_log': 'urn:publicid:IDN+instageni.gpolab.bbn.com+log+c8dc55c495fda95badf634eb36be236b', 'am_type': 'protogeni', 'geni_code': 1, 'am_code': 1, 'protogeni_error_url': 'https://boss.instageni.gpolab.bbn.com/spewlogfile.php3?logfile=c8dc55c495fda95badf634eb36be236b'}, 'value': 0}
10:58:02 INFO     stitch.Aggregate: Got AMAPIError doing createsliver IG-ST-3 at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm>: AMAPIError: Error from Aggregate: code 1. protogeni AM code: 1: vlan tag 3732 for 'link' not available.
10:58:02 INFO     stitch.launcher: Will put <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> back in the pool to allocate. Got Retry <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> 2th time with <Hop u'urn:publicid:IDN+instageni.gpolab.bbn.com+interface+procurve2:5.24.ion.newy.ae0' on path u'link'> new suggested 3748 (not 3732)
10:58:02 INFO     stitch.launcher: Pausing for 30 seconds for Aggregates to free up resources...


10:58:32 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-emulab-net.xml'
10:58:32 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.emulab.net:12369/protogeni/xmlrpc/am
10:59:20 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+emulab.net+authority+cm> complete.
10:59:20 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-12-instageni-gpolab-bbn-com.xml'
10:59:20 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.instageni.gpolab.bbn.com:12369/protogeni/xmlrpc/am
10:59:34 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.gpolab.bbn.com+authority+cm> complete.
10:59:34 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-utah-geniracks-net.xml'
10:59:34 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://boss.utah.geniracks.net:12369/protogeni/xmlrpc/am
10:59:48 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+utah.geniracks.net+authority+cm> complete.
10:59:48 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-3-createsliver-request-11-ion-internet2-edu.xml'
10:59:48 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
11:00:31 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
11:00:31 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
11:01:08 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
11:01:45 INFO     stitch.Aggregate: DCN circuit 62711 is ready
11:01:45 INFO     stitch.Aggregate: DCN circuit 62701 is ready
11:01:52 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
11:01:52 INFO     stitch.launcher: All aggregates are complete.
11:01:52 INFO     stitcher: Writing to 'IG-ST-3-manifest-rspec-stitching-combined.xml'
11:01:52 INFO     stitcher: Saved combined reservation RSpec at 5 AMs to file IG-ST-3-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-3 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information the Stanford host:

================================================================================
LOGIN INFO for AM: https://instageni.stanford.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-stan's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-stan using:
	ssh -p 32314  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.stanford.edu

Login to the Stanford host and ping each remote:

#ping GPO IG 
[lnevers@ig-stan ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59082ms
rtt min/avg/max/mdev = 100.266/102.015/201.101/12.906 ms

# Utah IG
[lnevers@ig-stan ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59112ms
rtt min/avg/max/mdev = 16.783/17.109/34.056/2.213 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSpec IG-ST-3.rspec:

$ stitcher createsliver IG-ST-3a ./IG-ST-3.rspec  --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 
10:39:52 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre1/src/gcf/stitcher_logging.conf
10:39:52 INFO    : Reading slice IG-ST-3a credential...
10:39:53 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-3a expires on 2015-01-21 16:42:49 UTC
10:39:53 INFO    : Using SCS at https://nutshell.maxgigapop.net:8443/geni/xmlrpc
10:39:53 INFO    : Calling SCS...
10:39:57 INFO    : Multi-AM reservation will include resources from these aggregates:
10:39:57 INFO    : 	<Aggregate oess>
10:39:57 INFO    : 	<Aggregate utah-ig>
10:39:57 INFO    : 	<Aggregate gpo-ig>
10:39:57 INFO    : 	<Aggregate ion>
10:39:57 INFO    : 	<Aggregate stanford-ig>
10:39:57 INFO    : 	<Aggregate utah-pg>
10:39:57 INFO    : Gathering currently available VLAN tags at <Aggregate utah-ig>...
10:39:59 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
10:40:16 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
10:40:16 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
10:40:36 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
10:40:36 INFO    : Stitcher doing createsliver at <Aggregate utah-pg>...
10:41:28 INFO    : ... Allocation at <Aggregate utah-pg> complete.
10:41:28 INFO    : Stitcher doing createsliver at <Aggregate oess>...
10:41:35 INFO    : ... Allocation at <Aggregate oess> complete.
10:41:35 INFO    : Stitcher doing createsliver at <Aggregate utah-ig>...
10:41:50 INFO    : ... Allocation at <Aggregate utah-ig> complete.
10:41:50 INFO    : Stitcher doing createsliver at <Aggregate ion>...
10:42:36 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
10:42:36 INFO    : Pausing 30 seconds to let circuit become ready...
10:43:14 INFO    : Pausing 30 seconds to let circuit become ready...
10:43:51 INFO    : DCN circuit 149101 is ready at <Aggregate ion>
10:43:51 INFO    : DCN circuit 149091 is ready at <Aggregate ion>
10:43:59 INFO    : ... Allocation at <Aggregate ion> complete.
10:43:59 INFO    : All aggregates are complete.
10:43:59 INFO    : Your resources expire at 2015-01-21T15:29:59 (UTC). 
10:43:59 INFO    : Saved combined reservation RSpec at 6 AMs to file '/home/lnevers/gcf-test/stitch-test/Stanford/IG-ST-3a-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-3a at 6 Aggregates (including 3 intermediate aggregate(s) not in the original request), creating 2 stitched link(s).

Determined login information the Stanford host:

$ readyToLogin.py IG-ST-3 -a stanford-ig
  ....
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -p 34874  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc1.instageni.stanford.edu

Login to the Stanford host and ping each remote:

#ping GPO IG 

[lnevers@ig-stan ~]$ ping 192.168.2.1 -c 60 -q
PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data.

--- 192.168.2.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 74.678/74.972/75.601/0.202 ms

# Utah IG
[lnevers@ig-stan ~]$ ping 192.168.4.1 -c 60 -q
PING 192.168.4.1 (192.168.4.1) 56(84) bytes of data.

--- 192.168.4.1 ping statistics ---
60 packets transmitted, 60 received, 0% packet loss, time 59086ms
rtt min/avg/max/mdev = 86.273/86.463/87.025/0.359 ms

IG-ST-4 New Site to GPO EG interoperability

ION Tests

Create a slice and then create the stitched slivers with the RSPec IG-ST-4.rspec:

$ stitcher.py createsliver IG-ST-4 --useExoSM ./IG-ST-4.rspec -o 
08:23:56 INFO     stitcher: Loading agg_nick_cache file '/home/lnevers/.gcf/agg_nick_cache'
08:23:56 INFO     stitcher: Loading config file /home/lnevers/.gcf/omni_config
08:23:56 INFO     stitcher: Using control framework portal
08:23:57 INFO     stitcher: Checking that slice IG-ST-4 is valid...
08:23:57 INFO     stitcher: Slice urn:publicid:IDN+ch.geni.net:ln-prj+slice+IG-ST-4 expires on 2014-02-27 13:04:16 UTC
08:24:00 INFO     stitcher: <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> speaks AM API v3, but sticking with v2
08:24:00 INFO     stitcher: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> is an EG AM and user asked for ExoSM. Changing to https://geni.renci.org:11443/orca/xmlrpc
08:24:00 INFO     stitcher: Stitched reservation will include resources from these aggregates:
08:24:00 INFO     stitcher: 	<Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm>
08:24:00 INFO     stitcher: 	<Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>
08:24:00 INFO     stitcher: 	<Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>
08:24:00 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-instageni-stanford-edu.xml'
08:24:00 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://www.instageni.stanford.edu:12369/protogeni/xmlrpc/am
08:24:15 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+instageni.stanford.edu+authority+cm> complete.
08:24:15 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-exogeni-net-bbnvmsite.xml'
08:24:15 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at https://geni.renci.org:11443/orca/xmlrpc
08:24:24 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
08:24:24 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3737
08:24:24 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
08:24:24 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3737
08:24:24 INFO     stitch.Aggregate: <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am>: Couldn't find link urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in path link-eggpo-igutah in EG manifest rspec (usually harmless; 2 of these may happen)
08:24:24 INFO     stitch.Aggregate:  ... returning Fake avail/suggested 2-4094, 3737
08:24:24 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+exogeni.net:bbnvmsite+authority+am> complete.
08:24:24 INFO     stitch.Aggregate: Writing to '/tmp/IG-ST-4-createsliver-request-11-ion-internet2-edu.xml'
08:24:24 INFO     stitch.Aggregate: 
	Stitcher doing createsliver at http://geni-am.net.internet2.edu:12346
08:25:07 INFO     stitch.Aggregate: DCN AM <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am>: must wait for status ready....
08:25:07 INFO     stitch.Aggregate: Pause 30 seconds to let circuit become ready...
08:25:44 INFO     stitch.Aggregate: DCN circuit 69791 is ready
08:25:51 INFO     stitch.Aggregate: Allocation at <Aggregate urn:publicid:IDN+ion.internet2.edu+authority+am> complete.
08:25:51 INFO     stitch.launcher: All aggregates are complete.
08:25:51 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:TenGigabitEthernet:1:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
08:25:51 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnNet+interface+BbnNet:IBM:G8052:GigabitEthernet:1:2:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
08:25:51 INFO     stitch.ManifestRSpecCombiner: Did not find HopLink urn:publicid:IDN+exogeni.net:bbnvmsite+interface+Bbn:ExoGeni:TenGigabitEthernet:1:ethernet in AM's Man RSpec, though found AM's path link-eggpo-igutah (usually harmless; happens 2 times for ExoGENI aggregates)
11:01:52 INFO     stitch.launcher: All aggregates are complete.
11:01:52 INFO     stitcher: Writing to 'IG-ST-4-manifest-rspec-stitching-combined.xml'
11:01:52 INFO     stitcher: Saved combined reservation RSpec at 5 AMs to file IG-ST-4-manifest-rspec-stitching-combined.xml
Stitching success: Reserved resources in slice IG-ST-4 at 5 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 2 link(s).

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-4 -a stanford-ig
...
================================================================================
LOGIN INFO for AM: https://instageni.stanford.edu:12369/protogeni/xmlrpc/am
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

ig-stan's geni_status is: ready (am_status:ready) 
User lnevers logs in to ig-stan using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.stanford.edu

$ readyToLogin.py IG-ST-4 -a eg-sm
...
================================================================================
LOGIN INFO for AM: https://geni.renci.org:11443/orca/xmlrpc
================================================================================

For more login info, see the section entitled:
	 'Providing a private key to ssh' in 'readyToLogin.py -h'

eg-gpo's geni_status is: ready (am_status:ready) 
User lnevers logs in to eg-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@192.1.242.111

Measurements

Iperf ExoGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 23.2 KByte (default)

Collected: 2014-02-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   334 MBytes  46.7 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.1 sec   332 MBytes  46.3 Mbits/sec
[  7]  0.0-60.1 sec   317 MBytes  44.3 Mbits/sec
[  5]  0.0-60.1 sec   330 MBytes  46.0 Mbits/sec
[  4]  0.0-60.1 sec   332 MBytes  46.3 Mbits/sec
[  3]  0.0-60.1 sec   321 MBytes  44.8 Mbits/sec
[SUM]  0.0-60.1 sec  1.59 GBytes   228 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec   325 MBytes  45.5 Mbits/sec
[  7]  0.0-60.0 sec   332 MBytes  46.4 Mbits/sec
[ 11]  0.0-60.0 sec   328 MBytes  45.8 Mbits/sec
[ 12]  0.0-60.0 sec   321 MBytes  44.9 Mbits/sec
[  5]  0.0-60.0 sec   330 MBytes  46.1 Mbits/sec
[  8]  0.0-60.0 sec   330 MBytes  46.1 Mbits/sec
[  6]  0.0-60.1 sec   306 MBytes  42.7 Mbits/sec
[ 10]  0.0-60.1 sec   329 MBytes  46.0 Mbits/sec
[  9]  0.0-60.1 sec   329 MBytes  46.0 Mbits/sec
[  3]  0.0-60.1 sec   331 MBytes  46.2 Mbits/sec
[SUM]  0.0-60.1 sec  3.19 GBytes   455 Mbits/sec

Iperf ExoGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-62.0 sec   183 MBytes  24.8 Mbits/sec   6.638 ms 382129/512795 (75%)
[  3]  0.0-62.0 sec  30 datagrams received out-of-order

Ping from ExoGENI GPO VM to the InstaGENI Stanford VM

60 packets transmitted, 60 received, 0% packet loss, time 59171ms
rtt min/avg/max/mdev = 107.040/107.103/107.134/0.293 ms

Iperf InstaGENI Stanford VM to ExoGENI GPO VM (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2014-02-20

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   346 MBytes  48.3 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-60.0 sec   142 MBytes  19.8 Mbits/sec
[  6]  0.0-60.1 sec   144 MBytes  20.0 Mbits/sec
[  3]  0.0-60.1 sec   143 MBytes  20.0 Mbits/sec
[  4]  0.0-60.2 sec   140 MBytes  19.5 Mbits/sec
[  5]  0.0-60.2 sec   144 MBytes  20.0 Mbits/sec
[SUM]  0.0-60.2 sec   712 MBytes  99.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  77.6 MBytes  10.9 Mbits/sec
[ 11]  0.0-60.0 sec  81.2 MBytes  11.4 Mbits/sec
[ 12]  0.0-60.1 sec  78.0 MBytes  10.9 Mbits/sec
[  6]  0.0-60.1 sec  60.8 MBytes  8.48 Mbits/sec
[ 10]  0.0-60.1 sec  69.6 MBytes  9.72 Mbits/sec
[  3]  0.0-60.1 sec  83.4 MBytes  11.6 Mbits/sec
[  8]  0.0-60.2 sec  67.8 MBytes  9.45 Mbits/sec
[  5]  0.0-60.2 sec  59.4 MBytes  8.28 Mbits/sec
[  9]  0.0-60.3 sec  60.8 MBytes  8.46 Mbits/sec
[  7]  0.0-60.3 sec  78.8 MBytes  10.9 Mbits/sec
[SUM]  0.0-60.3 sec   717 MBytes  99.7 Mbits/sec

Iperf InstaGENI Stanford VM to ExoGENI GPO VM (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512822 datagrams
[  3] Server Report:
[  3]  0.0-61.1 sec   246 MBytes  33.8 Mbits/sec   5.792 ms 337205/512821 (66%)
[  3]  0.0-61.1 sec  156 datagrams received out-of-order

Ping from InstaGENI Stanford VM to ExoGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59070ms
rtt min/avg/max/mdev = 107.066/107.116/107.181/0.427 ms

AL2S Tests

Create a slice and then create the stitched slivers with the RSPec IG-ST-4.rspec:

stitcher createslice IG-ST-4b
stitcher.py createsliver IG-ST-4b IG-ST-4.rspec  --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 -o
 

Determine Login:

Measurements

Iperf ExoGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-xx

One Client_

Five Clients

Ten Clients

Iperf ExoGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from ExoGENI GPO VM to InstaGENI Stanford VM

Iperf InstaGENI Stanford VM to ExoGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-xx

One Client_

Five Clients

Ten Clients

Iperf InstaGENI Stanford VM to ExoGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

Ping from InstaGENI Stanford VM to ExoGENI GPO VM

IG-ST-5 Site Information

ION Tests

Various pages include stitching information for a site. Each of the following were verified for this site:

  1. Verified that stitching VLANs and Device URN information exists in the Stanford Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Added site to the list of GENI Network Stitching Sites.

AL2S Tests

  1. Verified that stitching VLANs and Device URN information exists in the Stanford Aggregate page.

  1. Verified that Delegated GENI Stitching VLANs for site are documented at the Delegated GENI Stitching VLANs.
  1. Stitching Computation Service logs were reviewed while testing stitching to this site, no issues found.
  1. Already part of the list of GENI Network Stitching Sites.

IG-ST-6 New Site OpenFlow topology

ION Tests

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher createsliver IG-ST-6a IG-ST-6.rspec 
11:51:08 INFO    : Configured logging from file /home/lnevers/gcf-2.6-oess/src/gcf/stitcher_logging.conf
11:51:09 INFO    : Reading slice IG-ST-6a credential...
11:51:09 INFO    : Slice urn:publicid:IDN+ch.geni.net:Luisa_Nevers-Test-Proj_01+slice+IG-ST-6a expires on 2014-08-05 15:51:06 UTC
11:51:09 INFO    : Using SCS at http://geni.maxgigapop.net:8081/geni/xmlrpc
11:51:09 INFO    : Calling SCS...
11:51:12 INFO    : Multi-AM reservation will include resources from these aggregates:
11:51:12 INFO    : 	<Aggregate stanford-ig>
11:51:12 INFO    : 	<Aggregate gpo-ig>
11:51:12 INFO    : 	<Aggregate ion>
11:51:12 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
11:51:30 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
11:51:30 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
11:51:43 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
11:51:44 INFO    : Stitcher doing createsliver at <Aggregate ion>...
11:52:28 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
11:52:28 INFO    : Pausing 30 seconds to let circuit become ready...
11:53:05 INFO    : DCN circuit 110421 is ready at <Aggregate ion>
11:53:12 INFO    : Getting credential from file /tmp/slice-ch-geni-net-Luisa_Nevers-Test-Proj_01-IG-ST-6a-for-lnevers-cred.xml
11:53:12 INFO    : ... Allocation at <Aggregate ion> complete.
11:53:12 INFO    : All aggregates are complete.
11:53:12 INFO    : Your resources expire at 2 different times at different AMs. The first expiration is 2014-07-30 15:51:48 UTC at <Aggregate ion>. Second expiration is 2014-08-05T15:51:06 UTC. 
11:53:12 INFO    : Saved combined reservation RSpec at 3 AMs to file '/home/lnevers/gcf-test/stitch-test/Stanford/IG-ST-6a-manifest-rspec-stitching-combined.xml'
Success: Reserved resources in slice IG-ST-6a at 3 Aggregates (including 1 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determined login information at each Stanford and GPO aggregate:

$ readyToLogin.py IG-ST-6a -a stanford-ig
  ....
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc5.instageni.stanford.edu

$ readyToLogin.py IG-ST-6a -a gpo-ig
  ....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc2.instageni.gpolab.bbn.com

Measurements

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 16.0 KByte (default)

Collected: 2014-07-29

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.9 sec  85.9 MBytes  11.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.2 sec  31.8 MBytes  4.42 Mbits/sec
[  6]  0.0-60.7 sec  15.1 MBytes  2.09 Mbits/sec
[  4]  0.0-61.9 sec  16.5 MBytes  2.24 Mbits/sec
[  7]  0.0-62.8 sec  45.5 MBytes  6.08 Mbits/sec
[  5]  0.0-67.3 sec  30.4 MBytes  3.79 Mbits/sec
[SUM]  0.0-67.3 sec   139 MBytes  17.4 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-59.7 sec  15.6 MBytes  2.20 Mbits/sec
[  6]  0.0-60.3 sec  9.38 MBytes  1.30 Mbits/sec
[ 11]  0.0-60.5 sec  19.2 MBytes  2.67 Mbits/sec
[  3]  0.0-60.7 sec  21.0 MBytes  2.90 Mbits/sec
[  8]  0.0-60.9 sec  25.8 MBytes  3.55 Mbits/sec
[  5]  0.0-61.4 sec  19.1 MBytes  2.61 Mbits/sec
[ 10]  0.0-61.6 sec  7.62 MBytes  1.04 Mbits/sec
[  9]  0.0-63.3 sec  9.00 MBytes  1.19 Mbits/sec
[ 12]  0.0-63.8 sec  8.38 MBytes  1.10 Mbits/sec
[  4]  0.0-64.6 sec  9.50 MBytes  1.23 Mbits/sec
[SUM]  0.0-64.6 sec   145 MBytes  18.8 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 114 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.4 sec   140 MBytes  19.4 Mbits/sec   0.069 ms 413194/512820 (81%)
[  3]  0.0-60.4 sec  94 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI Stanford VM

60 packets transmitted, 60 received, 0% packet loss, time 59085ms
rtt min/avg/max/mdev = 100.365/114.079/639.682/76.067 ms

Iperf InstaGENI Stanford VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2014-07-29

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.9 sec   135 MBytes  18.5 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.0 sec  33.4 MBytes  4.67 Mbits/sec
[  5]  0.0-60.8 sec  36.6 MBytes  5.06 Mbits/sec
[  7]  0.0-64.9 sec  17.2 MBytes  2.23 Mbits/sec
[  3]  0.0-68.8 sec  18.1 MBytes  2.21 Mbits/sec
[  6]  0.0-78.7 sec  34.2 MBytes  3.65 Mbits/sec
[SUM]  0.0-78.7 sec   140 MBytes  14.9 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-57.6 sec  22.4 MBytes  3.26 Mbits/sec
[ 10]  0.0-59.2 sec  23.0 MBytes  3.26 Mbits/sec
[ 11]  0.0-60.5 sec  13.5 MBytes  1.87 Mbits/sec
[  3]  0.0-60.6 sec  12.8 MBytes  1.77 Mbits/sec
[  5]  0.0-61.7 sec  10.6 MBytes  1.44 Mbits/sec
[  9]  0.0-64.9 sec  9.12 MBytes  1.18 Mbits/sec
[  6]  0.0-65.4 sec  5.75 MBytes   737 Kbits/sec
[  7]  0.0-67.2 sec  18.1 MBytes  2.26 Mbits/sec
[  8]  0.0-71.9 sec  18.1 MBytes  2.11 Mbits/sec
[ 12]  0.0-74.7 sec  7.75 MBytes   870 Kbits/sec
[SUM]  0.0-74.7 sec   141 MBytes  15.8 Mbits/sec

Iperf InstaGENI Stanford VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.5 sec   140 MBytes  19.4 Mbits/sec   0.043 ms 413057/512817 (81%)
[  3]  0.0-60.5 sec  89 datagrams received out-of-order

Ping from InstaGENI Stanford VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59099ms
rtt min/avg/max/mdev = 100.374/115.432/692.703/84.087 ms

AL2S Tests

Create a slice and then create the stitched slivers using OpenFlow with the RSPec IG-ST-6.rspec:

$ stitcher createsliver IG-ST-6b IG-ST-6.rspec  --excludehop urn:publicid:IDN+instageni.stanford.edu+interface+procurve2:1.24.ion.salt.xe-0_1_1 
09:07:46 INFO    : Configured logging from file /home/lnevers/gcf-2.8-pre1/src/gcf/stitcher_logging.conf
09:07:46 INFO    : Reading slice IG-ST-6b credential...
09:07:47 INFO    : Slice urn:publicid:IDN+ch.geni.net:ln-test+slice+IG-ST-6b expires on 2015-01-16 15:27:26 UTC
09:07:47 INFO    : Using SCS at http://nutshell.maxgigapop.net:8081/geni/xmlrpc
09:07:47 INFO    : Calling SCS...
09:07:49 INFO    : Multi-AM reservation will include resources from these aggregates:
09:07:49 INFO    : 	<Aggregate stanford-ig>
09:07:49 INFO    : 	<Aggregate gpo-ig>
09:07:49 INFO    : 	<Aggregate oess>
09:07:49 INFO    : 	<Aggregate ion>
09:07:49 INFO    : Stitcher doing createsliver at <Aggregate stanford-ig>...
09:08:12 INFO    : ... Allocation at <Aggregate stanford-ig> complete.
09:08:12 INFO    : Stitcher doing createsliver at <Aggregate gpo-ig>...
09:08:47 INFO    : ... Allocation at <Aggregate gpo-ig> complete.
09:08:47 INFO    : Stitcher doing createsliver at <Aggregate oess>...
09:08:52 INFO    : ... Allocation at <Aggregate oess> complete.
09:08:52 INFO    : Stitcher doing createsliver at <Aggregate ion>...
09:09:37 INFO    : DCN AM <Aggregate ion>: must wait for status ready....
09:09:37 INFO    : Pausing 30 seconds to let circuit become ready...
09:10:15 INFO    : Pausing 30 seconds to let circuit become ready...
09:10:52 INFO    : DCN circuit 147961 is ready at <Aggregate ion>
09:10:59 INFO    : ... Allocation at <Aggregate ion> complete.
09:10:59 INFO    : All aggregates are complete.
09:10:59 INFO    : Your resources expire at 2015-01-16T13:57:49 (UTC). 
09:10:59 INFO    : Saved combined reservation RSpec at 4 AMs to file '/home/lnevers/gcf-test/stitch-test/Stanford/IG-ST-6b-manifest-rspec-multiam-combined.xml'
Success: Reserved resources in slice IG-ST-6b at 4 Aggregates (including 2 intermediate aggregate(s) not in the original request), creating 1 stitched link(s).

Determine login:

$ readyToLogin -a gpo-ig IG-ST-6b
....
ig-gpo's geni_status is: ready 
User lnevers logs in to ig-gpo using:
	ssh -p 35642  -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.gpolab.bbn.com

$ readyToLogin -a stanford-ig IG-ST-6b
....
ig-stan's geni_status is: ready 
User lnevers logs in to ig-stan using:
	ssh -i /home/lnevers/.ssh/geni_cert_portal_key lnevers@pc4.instageni.stanford.edu

Measurements

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-14

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.8 sec   136 MBytes  18.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-60.5 sec  35.9 MBytes  4.98 Mbits/sec
[  6]  0.0-60.8 sec  24.5 MBytes  3.38 Mbits/sec
[  3]  0.0-61.0 sec  21.4 MBytes  2.94 Mbits/sec
[  7]  0.0-61.1 sec  33.1 MBytes  4.55 Mbits/sec
[  5]  0.0-63.1 sec  25.9 MBytes  3.44 Mbits/sec
[SUM]  0.0-63.1 sec   141 MBytes  18.7 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.4 sec  13.5 MBytes  1.87 Mbits/sec
[  8]  0.0-61.3 sec  10.2 MBytes  1.40 Mbits/sec
[  4]  0.0-61.3 sec  11.9 MBytes  1.62 Mbits/sec
[ 10]  0.0-61.4 sec  9.75 MBytes  1.33 Mbits/sec
[  9]  0.0-61.5 sec  16.2 MBytes  2.22 Mbits/sec
[ 12]  0.0-61.8 sec  14.8 MBytes  2.00 Mbits/sec
[  5]  0.0-61.9 sec  11.0 MBytes  1.49 Mbits/sec
[  3]  0.0-62.2 sec  17.1 MBytes  2.31 Mbits/sec
[ 11]  0.0-62.4 sec  22.6 MBytes  3.04 Mbits/sec
[  7]  0.0-64.2 sec  16.4 MBytes  2.14 Mbits/sec
[SUM]  0.0-64.2 sec   144 MBytes  18.7 Mbits/sec

Iperf InstaGENI GPO VM to InstaGENI Stanford VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512810 datagrams
[  3] Server Report:
[  3]  0.0-60.1 sec   138 MBytes  19.3 Mbits/sec  16.097 ms 414065/512806 (81%)
[  3]  0.0-60.1 sec  94 datagrams received out-of-order

Ping from InstaGENI GPO VM to InstaGENI Stanford VM

60 packets transmitted, 60 received, 0% packet loss, time 59083ms
rtt min/avg/max/mdev = 74.890/93.001/734.301/95.691 ms

Iperf InstaGENI Stanford VM to InstaGENI GPO VM (TCP) - TCP window size: 23.5 KByte (default)

Collected: 2015-01-14

One Client_

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-61.0 sec   108 MBytes  16.8 Mbits/sec

Five Clients

[ ID] Interval       Transfer     Bandwidth
[  6]  0.0-60.2 sec  31.4 MBytes  4.37 Mbits/sec
[  4]  0.0-60.6 sec  31.4 MBytes  4.34 Mbits/sec
[  3]  0.0-61.3 sec  31.8 MBytes  4.35 Mbits/sec
[  5]  0.0-62.1 sec  15.6 MBytes  2.11 Mbits/sec
[  7]  0.0-62.7 sec  33.1 MBytes  4.44 Mbits/sec
[SUM]  0.0-62.7 sec   143 MBytes  19.2 Mbits/sec

Ten Clients

[ ID] Interval       Transfer     Bandwidth
[  7]  0.0-59.7 sec  13.6 MBytes  1.92 Mbits/sec
[ 12]  0.0-59.8 sec  14.9 MBytes  2.09 Mbits/sec
[ 10]  0.0-59.9 sec  14.9 MBytes  2.08 Mbits/sec
[  6]  0.0-60.2 sec  16.0 MBytes  2.23 Mbits/sec
[ 11]  0.0-60.6 sec  11.6 MBytes  1.61 Mbits/sec
[  5]  0.0-61.3 sec  17.4 MBytes  2.38 Mbits/sec
[  9]  0.0-61.3 sec  7.50 MBytes  1.03 Mbits/sec
[  4]  0.0-62.0 sec  17.1 MBytes  2.32 Mbits/sec
[  8]  0.0-62.0 sec  13.9 MBytes  1.88 Mbits/sec
[  3]  0.0-65.6 sec  17.2 MBytes  2.21 Mbits/sec
[SUM]  0.0-65.6 sec   144 MBytes  18.4 Mbits/sec

Iperf InstaGENI Stanford VM to InstaGENI GPO VM (UDP) - UDP buffer size: 224 KByte (default)

[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-60.0 sec   719 MBytes   101 Mbits/sec
[  3] Sent 512821 datagrams
[  3] Server Report:
[  3]  0.0-60.6 sec   139 MBytes  19.2 Mbits/sec   0.041 ms 413808/512816 (81%)
[  3]  0.0-60.6 sec  110 datagrams received out-of-order

Ping from InstaGENI Stanford VM to InstaGENI GPO VM

60 packets transmitted, 60 received, 0% packet loss, time 59084ms
rtt min/avg/max/mdev = 74.910/92.147/828.553/101.265 ms

Email help@geni.net for GENI support or email me with feedback on this page!
Last modified 9 years ago Last modified on 01/20/15 10:48:56